MATEC Web of Conferences

Open Access

Preface 00001

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822400001

• Abstract
• PDF (1.010 MB)

Open Access

Method of building dynamic relations, estimating product and grinding circle shape deviations 01001

Stanislav Roshchupkin and Alexander Kharchenko

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401001

• Abstract
• PDF (334.2 KB)
• References

Open Access

Flat grinding model, considering internal dynamics of the process 01002

Sergey Bratan and Ekaterina Vladetskaya

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401002

• Abstract
• PDF (387.2 KB)
• References

Open Access

Calculating the profile of intermittent grinding wheel for the sharpening teeth of the broach 01003

Vladimir Bogutsky, Yurij Novoselov and Leonid Shron

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401003

• Abstract
• PDF (743.8 KB)
• References

Open Access

The technology of combined processing of extruded materials 01004

Oleg Kirillov, Vladislav Smolentsev and Sergey Yukhnevich

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401004

• Abstract
• PDF (360.3 KB)
• References

Open Access

Research of working capacity of grinding wheels 01005

Tatyana N. Ivanova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401005

• Abstract
• PDF (620.3 KB)
• References

Open Access

Design and technological methods of reducing of thermal stress in grinding process 01006

Tatyana N. Ivanova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401006

• Abstract
• PDF (501.0 KB)
• References

Open Access

Improving the cutting tool durability by applying multi-layer coatings 01007

Alexandra Vereshchagina and Vladislav Vereshchagin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401007

• Abstract
• PDF (492.8 KB)
• References

Open Access

The mechanism of wearing of the hard alloy tool under ultrasonic reinforcing finishing treatment 01008

Viktor Gileta and Anatoly Beznedelnyy

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401008

• Abstract
• PDF (535.0 KB)
• References

Open Access

Possible mechanisms of electrochemical processing activation ARMCO-iron 01009

Konstantin Rakhimyanov, Nadezhda Gaar and Aleksandr Loktionov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401009

• Abstract
• PDF (488.7 KB)
• References

Open Access

Perspectives of the industrial recycling of hard-alloy materials waste by electro-erosive grinding 01010

Kharis Rakhimyanov and Valentina Marusina

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401010

• Abstract
• PDF (685.5 KB)
• References

Open Access

Technological possibilities of high-precision plasma cutting in processing materials of different class 01011

Andrey Rakhimyanov, Alexander Loktionov and Nadezhda Gaar

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401011

• Abstract
• PDF (393.2 KB)
• References

Open Access

Anodic behavior of amorphous and nanocrystal alloys during the electrochemical processing 01012

Konstantin Rakhimyanov, Maria Ivanova and Svetlana Vasilevskaya

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401012

• Abstract
• PDF (540.2 KB)
• References

Open Access

Prospects of combining electro-erosive and electrochemical processes in forming the holes of a small diameter in difficult-to-process materials 01013

Kharis Rakhimyanov and Svetlana Vasilevskaya

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401013

• Abstract
• PDF (499.3 KB)
• References

Open Access

Robotic edge machining with abrasive brushes 01014

Yuriy Dimov and Dmitriy Podashev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401014

• Abstract
• PDF (999.3 KB)
• References

Open Access

Development of a virtual management system for the cutting process using neural networks 01015

Irina Ovsyanikova and Aleksandr Tarapanov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401015

• Abstract
• PDF (320.7 KB)
• References

Open Access

The schemes analysis of profile milling of long and non-technological workpieces 01016

Vladimir G. Gusev, Anatoly A. Fomin and Vladimir A. Saldaev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401016

• Abstract
• PDF (554.6 KB)
• References

Open Access

The process of interaction between abrasive disk and a workpiece while grinding under ultrasonic vibrations 01017

Alexandr Unyanin and Alexandr Khazov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401017

• Abstract
• PDF (442.7 KB)
• References

Open Access

Application of two-component technological media for surface processing with a high degree of curvature 01018

Vladislav Smolentsev, Alexej Kuzovkin and Igor Drozdov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401018

• Abstract
• PDF (590.2 KB)
• References

Open Access

The principles of the milling equipment improvement 01019

Anatoly Bardovsky, Alla Gerasimova and Arsen Aydunbekov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401019

• Abstract
• PDF (518.4 KB)
• References

Open Access

An approach of developing low cost ARM based CNC systems by controlling CAN drives 01020

Georgi M. Martinov, Akram Al Khoury and Ahed Issa

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401020

• Abstract
• PDF (585.4 KB)
• References

Open Access

Reverse engineering as a way to optimize and design parts produced by elastic-medium drawing 01021

Vladimir Mironenko, Elena Matsuro and Catherine Ledovskikh

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401021

• Abstract
• PDF (493.7 KB)
• References

Open Access

Multidimensional analysis of monitoring and diagnostic information on the technological process 01022

Aleksandr Pishchukhin and Gulnara Akhmedyanova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401022

• Abstract
• PDF (509.4 KB)
• References

Open Access

Development of a modern comprehensive technology for extending the life of turbine blades of SGT Siemens power plants and alike 01023

Olga Berdnik, Irina Tsareva, Ludmila Krivina and Yuriy Tarasenko

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401023

• Abstract
• PDF (889.6 KB)
• References

Open Access

Pulse micro-surfacing as nonconventional method within the comprehensive technology of the gas-turbine engine recovery 01024

Yuriy Tarasenko, Ludmila Krivina and Sergei Kirikov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401024

• Abstract
• PDF (918.5 KB)
• References

Open Access

Development and improvement of lost foam casting technology based on mathematical modeling 01025

Nikolay Nesterov and Boris Vorontsov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401025

• Abstract
• PDF (445.5 KB)
• References

Open Access

Planning the properties of a coated abrasive by quality function deployment 01026

Nelli V. Syreyshchikova and Viktor I. Guzeev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401026

• Abstract
• PDF (542.4 KB)
• References

Open Access

Application of protective coatings in combined electric diamond grinding 01027

Alexander Yanyushkin, Vyacheslav Popov and Daniel Rychkov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401027

• Abstract
• PDF (555.4 KB)
• References

Open Access

Deviation from flatness of surfaces after combined peripheral grinding 01028

Vladimir G. Gusev and Alexey V. Morozov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401028

• Abstract
• PDF (710.2 KB)
• References

Open Access

Research of kinematics of an actuating group of an anthropomorphic gripper with a common drive 01029

Alexey Bogdanov, Alexander Permyakov and Yulia Zhdanova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401029

• Abstract
• PDF (594.8 KB)
• References

Open Access

Reengineering of the ore preparation production process in the context of “Almalyk MMC” JSC 01030

Margarita Naumova, Ilnur Basyrov and Khakim Aliev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401030

• Abstract
• PDF (753.8 KB)
• References

Open Access

Chemical polishing of samples obtained by selective laser melting from titanium alloy Ti6Al4V 01031

Andrey V. Balyakin, Aleksei N. Shvetcov and Evgeny I. Zhuchenko

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401031

• Abstract
• PDF (690.2 KB)
• References

Open Access

Fundamental research and methods of quality assurance of coated abrasive 01032

Nelli V. Syreyshchikova and Danil Yu. Pimenov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401032

• Abstract
• PDF (633.7 KB)
• References

Open Access

Improvement of the quality of designed cylindrical grinding cycle with traverse feeding based on the use of digital twin options 01033

Pavel Pereverzev, Aleksandra Akintseva and Masar Alsigar

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401033

• Abstract
• PDF (386.1 KB)
• References

Open Access

Impact of metal removal features in the reverse zones on shaping of the machined surface in the process of cylindrical grinding with traverse feed 01034

Pavel Pereverzev, Aleksandra Akintseva and Masar Alsigar

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401034

• Abstract
• PDF (535.3 KB)
• References

Open Access

Tool stability analysis for deep hole drilling 01035

Sergey Gorbatyuk, Valery Kondratenko and Larisa Sedykh

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401035

• Abstract
• PDF (672.4 KB)
• References

Open Access

Refinement issue of displaced volume at upsetting of cylindrical workpiece by radial dies 01036

Viktor Artiukh, Volodymyr Kukhar and Elena Balalayeva

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401036

• Abstract
• PDF (615.8 KB)
• References

Open Access

Approaches to nonlinear theory creation for machine tools geometric accuracy 01037

Olesya Anikeeva, Alexander Ivakhnenko and Oleg Erenkov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401037

• Abstract
• PDF (468.1 KB)
• References

Open Access

Bases of variational method for calculating of metal-cutting systems accuracy 01038

Olesya Anikeeva, Alexander Ivakhnenko and Oleg Erenkov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401038

• Abstract
• PDF (1.074 MB)
• References

Open Access

Kinematic error of a harmonic drive 01039

Igor Lyuminarsky and Stanislav Lyuminarsky

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401039

• Abstract
• PDF (481.7 KB)
• References

Open Access

Theoretical investigation of the effect of the taper angle of the deforming roller on the limiting degrees of deformation in the process of flow forming 01040

Andrey A. Udalov, Sergey V. Parshin and Aleksandr V. Udalov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401040

• Abstract
• PDF (430.0 KB)
• References

Open Access

Comparative analysis of performance characteristics of nozzle heads for powder transportation in a laser cladding and direct material deposition 01041

Oleg Kovalev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401041

• Abstract
• PDF (578.0 KB)
• References

Open Access

Impact of manufacturing errors of ball screw system on performance characteristics 01042

Alexander Denisenko

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401042

• Abstract
• PDF (384.7 KB)
• References

Open Access

90 degrees two-angle bending method with due to blank’s elastic spring back properties 01043

Elena Nesterenko and Alexander Kuzin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401043

• Abstract
• PDF (522.0 KB)
• References

Open Access

Achieving high quality surface of laminated glass-reinforced plastics during milling 01044

Daniel Rychkov, Dmitry Lobanov and Aleksey Kuznetsov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401044

• Abstract
• PDF (563.1 KB)
• References

Open Access

Prevention unstable conditions in the welding process via robotic technological complexes 01045

Dmitry Fominykh, Vadim Kushnikov and Alexander Rezchikov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401045

• Abstract
• PDF (430.3 KB)
• References

Open Access

Determination of maximum working capacity of retrofittable cutters on the basis of physical-mechanical features of tool hard alloys 01046

Evgeniy V. Artamonov, Andrey M. Tveryakov and Anton S. Shtin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401046

• Abstract
• PDF (507.9 KB)
• References

Open Access

Vibratory drilling with digital adaptive control 01047

Ilya Ivanov, Ivan Pleshcheev and Andrey Larkin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401047

• Abstract
• PDF (489.5 KB)
• References

Open Access

Precision CNC machining and ways to achieve it 01048

Roman Nekrasov, Ulyana Putilova and Yulia Tempel

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401048

• Abstract
• PDF (542.5 KB)
• References

Open Access

Experimental research of cutting forces during microgrinding 01049

Aleksandr Dyakonov and Anastasia Gorodkova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401049

• Abstract
• PDF (559.8 KB)
• References

Open Access

Investigation of the plain milling process dynamic stability taking into account the contact interaction on the flank face of the cutting wedge 01050

Nikita Zhukov, Vladimir Kuts and Bogdan Suldin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401050

• Abstract
• PDF (653.0 KB)
• References

Open Access

An interlocking side mill with retrofittable carbide blades for processing of coarse-pitch tooth wheels 01051

Evgeniy V. Artamonov, Vitaliy V. Kireev and Vitaliy A. Zyryanov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401051

• Abstract
• PDF (482.7 KB)
• References

Open Access

The formation of the quality parameters of the surface layer by ultrasonic 01052

Vyacheslav Shuvaev and Nadezhda Krylova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401052

• Abstract
• PDF (327.3 KB)
• References

Open Access

The device for center adjustment of pipe joints to carry out welding works when building and major repairing main pipelines 01053

Asvar Akhmedov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401053

• Abstract
• PDF (630.2 KB)
• References

Open Access

Control of the induction soldering on the basis of process temperature indirect measurements 01054

Vadim S. Tynchenko, Vyacheslav E. Petrenko and Alexander V. Murygin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401054

• Abstract
• PDF (390.6 KB)
• References

Open Access

Spark plasma and conventional sintering of ZrO₂-TiN composites: A comparative study on the microstructure and mechanical properties 01055

Yuri Pristinskiy, Nestor Washington Solis Pinargote and Anton Smirnov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401055

• Abstract
• PDF (718.8 KB)
• References

Open Access

Determination of machining errors caused by dynamic deformations from process equipment 01056

Aleksandr Starikov, Ulyana Putilova and Olga Tempel

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401056

• Abstract
• PDF (1.069 MB)
• References

Open Access

Methodology of designing integrated technological processes for manufacturing CNC machined parts 01057

Viktor I. Guzeev and Danil Yu. Pimenov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401057

• Abstract
• PDF (320.3 KB)
• References

Open Access

Use of combined methods of treatment to obtain artificial roughness on the parts’ surfaces 01058

Alexander Ryazantsev and Sergey Yukhnevich

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401058

• Abstract
• PDF (459.2 KB)
• References

Open Access

Self-oscillation suppression when turning non-rigid shafts using spring tools and the spring headstock center 01059

Valery Svinin, Aleksey Samsonov, Andrey Savilov and Aleksey Pyatykh

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401059

• Abstract
• PDF (1.022 MB)
• References

Open Access

Influence of the conditions of selective laser melting on evaporation 01060

Roman S. Khmyrov, Cyrill E. Protasov and Andrey V. Gusarov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401060

• Abstract
• PDF (1.411 MB)
• References

Open Access

The field of rational application of the methods of hardening treatment 01061

Vitalii Krutsilo, Nina Papsheva and Olga Akushskaya

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401061

• Abstract
• PDF (502.4 KB)
• References

Open Access

Contact ability optimization of the surface of titanium parts with different stiffness during flat grinding by highly porous wheel 01062

Yakov I. Soler, Dinh Si Mai and Denis Yu. Kazimirov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401062

• Abstract
• PDF (587.5 KB)
• References

Open Access

Bending deformation analysis of gear hone tooth lateral faces 01063

Yuriy Bagaiskov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401063

• Abstract
• PDF (488.6 KB)
• References

Open Access

Possibilities and limitations of titanium alloy additive manufacturing 01064

Anton Agapovichev, Anton Sotov, Victoria Kokareva and Vitaly Smelov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401064

• Abstract
• PDF (447.6 KB)
• References

Open Access

Numeric simulation of aircraft engine parts additive manufacturing process 01065

Peter Maksimov, Oleg Smetannıkov, Aleksandra Dubrovskaya, Konstantin Dongauzer and Leonid Bushuev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401065

• Abstract
• PDF (816.4 KB)
• References

Open Access

The influence of hydrojet surface processing on the adhesive strength of wear-resistant coatings deposited on a metal-cutting tool of oxynitride ceramics 01066

Anton Seleznev, Anton Smirnov and Pavel Peretyagin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401066

• Abstract
• PDF (540.7 KB)
• References

Open Access

Efficiency improvement for assigning of cutting conditions on the basis of the thermo-EMF signal 01067

Zhanna Tikhonova, Dmitriy Kraiynev and Evgeniy Frolov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401067

• Abstract
• PDF (390.7 KB)
• References

Open Access

Analysis of possibilities of high-speed prototyping technology in hot section manufacturing 01068

Andrey V. Balaykin, Roman A. Vdovin and Elena M. Dobryshkina

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401068

• Abstract
• PDF (592.5 KB)
• References

Open Access

Effect of applied load on welding stress at different time periods 01069

Yanhu Wang, Sergey Konovalov, Xizhang Chen and Irina Komissarova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401069

• Abstract
• PDF (783.9 KB)
• References

Open Access

Formation of the surface roughness during grinding with flap wheels after shot peening 01070

Darya Starodubtseva, Vinh Le Tri and Vladimir Koltsov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401070

• Abstract
• PDF (455.6 KB)
• References

Open Access

Grinding tools made of grains with controlled shape and orientation 01071

Alexander Korotkov and Vitaly Korotkov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401071

• Abstract
• PDF (345.7 KB)
• References

Open Access

Calculation of linear technological dimensions with adaptation 01072

Vasily Masyagin, Ruslan Bazhenov and Roman Artyukh

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401072

• Abstract
• PDF (635.1 KB)
• References

Open Access

Innovation in additive manufacturing of parts from aluminium matrix composites 01073

Tatiana Tarasova, Galina Gvozdeva and Riana Ableyeva

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401073

• Abstract
• PDF (1.028 MB)
• References

Open Access

Rational modes selection of magnetic treatment of metal surfaces 01074

Oleg Burlachenko, Alexander Lyashenko and Maxim Ivanov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401074

• Abstract
• PDF (628.1 KB)
• References

Open Access

Investigation of cutting force oscillations when high productivity milling 01075

Dmitry Aleynikov, Anatoly Lukyanov, Andrey Savilov and Dmitry Paikin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401075

• Abstract
• PDF (903.9 KB)
• References

Open Access

Magnetohydrodynamic pump application in complex form aluminum parts additive manufacturing 01076

Alexey Drobotov, Artem Avdeev and Andrey Shvets

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401076

• Abstract
• PDF (634.4 KB)
• References

Open Access

Study of surface quality using quasi-optimal correlation algorithms 01077

Nicolay V. Nosov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401077

• Abstract
• PDF (585.9 KB)
• References

Open Access

Features of technological basing in machining parts on CNC machines 01078

Nicolay V. Nosov and Andrey A. Cherepashkov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401078

• Abstract
• PDF (354.0 KB)
• References

Open Access

On-line diagnostics of the physical and mechanical properties of the surface at the production stage 01079

Dmitriy Kraynev, Zhanna Tikhonova and Alexander Bondarev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401079

• Abstract
• PDF (370.9 KB)
• References

Open Access

Numerical modeling of automated tape placement process of unidirectional thermoplastic 01080

Aleksandr N. Anoshkin, Pavel V. Pisarev and Yulia S. Kirova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401080

• Abstract
• PDF (723.0 KB)
• References

Open Access

The influence of the tool base on the formation of stresses in wear-resistant coatings in the cutting process 01081

Aleksey Chikhranov, Vladimir Tabakov and Olga Nazarova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401081

• Abstract
• PDF (413.3 KB)
• References

Open Access

Use of additive technologies to increase effectiveness of design and use of a vacuum gripping devices for flexible containers 01082

Alexey M. Makarov, Oleg V. Mushkin and Maksim A. Lapikov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401082

• Abstract
• PDF (448.4 KB)
• References

Open Access

Model of control over cutting tool demand in a machining shop 01083

Igor Lutoshkin, Aleksandr Madanov and Yury Polyanskov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401083

• Abstract
• PDF (358.7 KB)
• References

Open Access

Backing plate effect on temperature controlled FSW process 01084

Igor Zybin, Konstantin Trukhanov, Andrey Tsarkov and Sergey Kheylo

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401084

• Abstract
• PDF (1.515 MB)
• References

Open Access

Improving the accuracy of machining of non-rigid shaft 01085

Oleg Drachev, Alexander Bobrowskii and Alexey Zotov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401085

• Abstract
• PDF (437.1 KB)
• References

Open Access

Automated block-by-block correction of milling parameters by means of numerical simulation 01086

Igor Kiselev, Nikita Jukov and Konstantin Deev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401086

• Abstract
• PDF (547.5 KB)
• References

Open Access

Functional parameters of the cutting process of the cutting tool with multilayer coatings after pulsed laser treatment 01087

Sergei Sizov, Vladimir Tabakov and Aleksey Chikhranov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401087

• Abstract
• PDF (656.3 KB)
• References

Open Access

Algorithm for recognition of details in the machine vision systems at automation of assembly processes 01088

Yaroslav Kulkov, Arkady Zhiznyakov and Denis Privezentsev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401088

• Abstract
• PDF (370.9 KB)
• References

Open Access

Approach to the construction of specialized portable terminals for monitoring and controlling technological equipment 01089

Petr Nikishechkin, Nadezhda Chervonnova and Anatoly Nikich

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401089

• Abstract
• PDF (975.1 KB)
• References

Open Access

Integrated approach to providing for environmental friendliness and safety of the technological processes 01090

Leonid Shvartsburg, Olga Yagolnitser and Elena Butrimova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401090

• Abstract
• PDF (392.6 KB)
• References

Open Access

Design of an expert system for the prediction and comprehensive diagnosis of CNC machining fault 01091

Khalid Al-Jonid, Alexander Kozlov and Nikolay Baryshev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401091

• Abstract
• PDF (610.4 KB)
• References

Open Access

Comparing the efficiency of flowsheets for hot die forging on crank presses 01092

Igor Telegin and Tatyana Shumilova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401092

• Abstract
• PDF (564.6 KB)
• References

Open Access

Analysis of the applicability of filtration methods for coordinate measurements 01093

Fedor V. Grechnikov, Andrei V. Kochetkov and Oleg V. Zakharov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401093

• Abstract
• PDF (721.4 KB)
• References

Open Access

Designing spline broaches of optimal structure 01094

Svetlana Lukina, Margarita Krutyakova and Sergey Ivannikov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401094

• Abstract
• PDF (325.5 KB)
• References

Open Access

Methods of automated control over composition and structure of metalworking equipment 01095

Svetlana Lukina, Elena Korshunova and Igor Dorozhkin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401095

• Abstract
• PDF (344.2 KB)
• References

Open Access

Processing of parts for aerospace engineering 01096

Alexander I. Boldyrev, Alexander A. Boldyrev and Oleg N. Fedonin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401096

• Abstract
• PDF (266.9 KB)
• References

Open Access

Strengthening of materials by vibroimpact and combined methods with previous electrochemical processing 01097

Alexander I. Boldyrev, Alexander A. Boldyrev and Oleg N. Fedonin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401097

• Abstract
• PDF (423.3 KB)
• References

Open Access

Investigation of parts assembly error, taking into account the deviation of the shape of their surfaces 01098

Mikhail Bolotov, Iliya Grachev and Evgeny Kudashov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401098

• Abstract
• PDF (393.0 KB)
• References

Open Access

Development of machine-building enterprises controlling 01099

Ramil Mavlioutov and Olga Chubenko

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401099

• Abstract
• PDF (464.7 KB)
• References

Open Access

Development of an algorithm for calculating the number of regrindings for a shaver with the continuous spiral cutting edge 01100

Aleksandr Golovko

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401100

• Abstract
• PDF (516.1 KB)
• References

Open Access

An approach to creation of a unified system of programming CNC machines in the dialog mode 01101

Liliya I. Martinova and Nikolay N. Fokin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401101

• Abstract
• PDF (395.4 KB)
• References

Open Access

Vibrations reduction in milling by using singular spectral analysis 01102

Vladimir Kuts, Igor Kiselev and Sergey Voronov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401102

• Abstract
• PDF (575.9 KB)
• References

Open Access

Definition of the initial information for selecting the cutting tool for automated production preparation 01103

Aleksandr Golovko and Sergey Petrov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401103

• Abstract
• PDF (307.9 KB)
• References

Open Access

The nature of the change of the surface temperature of the workpiece during hot rolling of pipe steel 01104

Vladimir Nekit, Sergey Platov and Maksim Krasnov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401104

• Abstract
• PDF (329.1 KB)
• References

Open Access

The simulation of cold volumetric stamping by the method of transverse extrusion 01105

Anatoly K. Belan, Vladimir A. Nekit and Olga A. Belan

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401105

• Abstract
• PDF (530.0 KB)
• References

Open Access

Experimental method of calculation to estimate the thickness of lubricating film in the friction unit depending on oil absorption of contacting surfaces 01106

Dmitriy Terentyev, Nikolay Ogarkov and Sergey Platov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401106

• Abstract
• PDF (439.3 KB)
• References

Open Access

Effect of electrode polarity on fatigue life in EDM 01107

Hacı Bekir Özerkan

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401107

• Abstract
• PDF (495.8 KB)
• References

Open Access

Determination of shrinkage of weld 01108

Nikolay Velikanov, Sergey Koryagin and Oleg Sharkov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401108

• Abstract
• PDF (407.7 KB)
• References

Open Access

Application of the criterial approach for the choice of forming technology for rod fasteners 01109

Oleg Zhelezkov, Sergey Malakanov and Timur Galiahmetov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401109

• Abstract
• PDF (371.6 KB)
• References

Open Access

Wear-resisting properties of multilayer coated carbide blades under different technological conditions of turning of heat-resistant steel 01110

Vyacheslav Pchelkin and Tatyana Duyun

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401110

• Abstract
• PDF (795.4 KB)
• References

Open Access

Mathematical model for determination of the most advantageous conditions for formation of parts of aerospace engineering on the operations of the end milling 01111

Dmitriy L. Skuratov, Dmitriy V. Evdokimov and Dmitriy G. Fedorov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401111

• Abstract
• PDF (498.9 KB)
• References

Open Access

Mathematical model for determining rational machining conditions for flat grinding with the wheel periphery on machines with a rectangular table 01112

Dmitriy L. Skuratov, Dmitriy G. Fedorov and Dmitriy V. Evdokimov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401112

• Abstract
• PDF (413.3 KB)
• References

Open Access

Enhance the efficiency of the internal threads cutting process with taps by applying ultrasonic vibrations 01113

Valery Golovkin, Oksana Batishcheva and Valery Papshev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401113

• Abstract
• PDF (907.7 KB)
• References

Open Access

Simulation model of selective assembly of two parts with sorting by the estimated values 01114

Oleg Filipovich and Vadim Kopp

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401114

• Abstract
• PDF (360.4 KB)
• References

Open Access

Optimization of modes for processing water-ice cleaning of machine parts 01115

Mikhail Burnashov and Alexander Prezhbilov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401115

• Abstract
• PDF (625.1 KB)
• References

Open Access

Method of developing parametric machine cycles for modern CNC systems using high-level language 01116

Roman Pushkov, Evgeniy Salamatin and Svetlana Evstafieva

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401116

• Abstract
• PDF (453.1 KB)
• References

Open Access

Vacuum methods of surface treatment with subnanometer roughness 01117

Yury Panfilov and Leonid Kolesnik

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401117

• Abstract
• PDF (853.4 KB)
• References

Open Access

Joining of dissimilar materials by friction stir welding 01118

Zakaria Boumerzoug

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401118

• Abstract
• PDF (691.7 KB)
• References

Open Access

Multi-criteria planning model of engines parts additive manufacturing 01119

Victoria Kokareva, Anton Agapovichev, Anton Sotov, Vitaliy Smelov and Vadim Sufiiarov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401119

• Abstract
• PDF (573.7 KB)
• References

Open Access

Simulation of large-size plain bearings processing using a virtual prototype of machine module 01120

Tatyana A. Duyun, Dmitry A. Bushuev, Maksim A. Sukharev and Vasiliy G. Rubanov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401120

• Abstract
• PDF (529.4 KB)
• References

Open Access

Evaluation of the types of multiproduct manufacturing of machine components and some aspects of their design 01121

Alexander I. Kondakov and Alexander S. Vasiljev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401121

• Abstract
• PDF (425.5 KB)
• References

Open Access

Ensuring the quality of the machined holes during the hole truing and reaming on lathe machines 01122

Aziz Aliev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401122

• Abstract
• PDF (566.3 KB)
• References

Open Access

Comprehensive ensuring of quality of surfaces of details at centrifugal-planetary volume processing 01123

Alexander Zverovshchikov, Vladimir Zverovshchikov and Sergey Nesterov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401123

• Abstract
• PDF (1.132 MB)
• References

Open Access

Element composition of additive products from electroerozive cobalt-chromum powders 01124

Evgeny Ageev, Alexandr Altukhov and Alexandr Novikov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401124

• Abstract
• PDF (928.5 KB)
• References

Open Access

Porosity of products from electroerosive cobalt-chromum powders, obtained by additive technologies 01125

Evgeny Ageev, Alexandr Altukhov and Alexandr Novikov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401125

• Abstract
• PDF (389.2 KB)
• References

Open Access

Analysis of mathematical models of drilling describing surface quality and tool overload protection aspects 01126

Dilyaver Abdulgazis, Ervin Umerov and Umer Abdulgazis

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401126

• Abstract
• PDF (395.5 KB)
• References

Open Access

Determining deviations of output variables from forecast values in system for monitoring external round grinding process 01127

Elmar Yagyaev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401127

• Abstract
• PDF (472.3 KB)
• References

Open Access

Forming and developing engineering technology as a science 01128

Anatoly G. Suslov and Dmitry I. Petreshin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401128

• Abstract
• PDF (376.4 KB)
• References

Open Access

The relation between the geometric parameters of grinding powders grains measured by laser diffraction and light-microscopical methods 01129

Vladimir A. Nosenko and Alexey A. Aleksandrov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401129

• Abstract
• PDF (488.1 KB)
• References

Open Access

Improving material cutting by application of natural origin oil 01130

Chingiz Yakubov, Ruslan Dzhemalyadinov and Vladimir Skakun

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401130

• Abstract
• PDF (758.5 KB)
• References

Open Access

The study of dynamic characteristics during the vibration processing of parts 01131

Elena Levchenko

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401131

• Abstract
• PDF (645.8 KB)
• References

Open Access

Interrelation of processing modes with the current parameters of the contact zone during thermofriction processing 01132

Nikolay Pokintelitsa

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401132

• Abstract
• PDF (463.7 KB)
• References

Open Access

Synthesis of lunberger stochastic observer for estimation of the grinding operation state 01133

Sergey Bratan and Stanislav Roshchupkin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401133

• Abstract
• PDF (423.3 KB)
• References

Open Access

Investigation of dynamics of roll forming processes 01134

Leonid A. Kondratenko and Lubov I. Mironova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401134

• Abstract
• PDF (475.3 KB)
• References

Open Access

Adjustment of specialized technological equipment when machining small diameter internal threads with deforming cutting taps 01135

Pavel Novikov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401135

• Abstract
• PDF (427.4 KB)
• References

Open Access

Decomposition of milling operation 01136

Yurij Novoselov, Mariya Piankovskaya and Vladimir Bogutsky

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401136

• Abstract
• PDF (719.1 KB)
• References

Open Access

Evaluation of the influence of manufacturing errors on the quality of sealing joints installation 01137

Aleksey Tarakhovskiy and Vadim Kramar

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401137

• Abstract
• PDF (356.0 KB)
• References

Open Access

Research of reliability and efficiency of technological processes of mechanical assembly production on the basis of the common semi-Markov model 01138

Yuri Rapatskiy, Mikhail Zamorenov, Vadim Kopp, Yuri Obzherin, Vladimir Gusev and Victoria Lipka

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822401138

• Abstract
• PDF (502.6 KB)
• References

Open Access

The study of algorithms for 3D’s engineering object representing with regard to their construction specifics 02001

Ekaterina Sokolova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402001

• Abstract
• PDF (362.4 KB)
• References

Open Access

Research and development of decision-making methods for creating 3d objects in mechanical engineering 02002

Alan Kumaritov and Ekaterina Sokolova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402002

• Abstract
• PDF (372.1 KB)
• References

Open Access

The performance evaluation for rivet bonded joints in production and machine maintenance 02003

Natalia Baurova, Alexander Anoprienko and Yulia Romanova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402003

• Abstract
• PDF (723.6 KB)
• References

Open Access

Application of glue machinery repairs in Arctic conditions 02004

Alexander Konoplin, Natalia Baurova and Sergei Abrakov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402004

• Abstract
• PDF (404.8 KB)
• References

Open Access

For an incompressible lubricant in the bearing sliding surfaces of the spherical segments with the adjusted surfaces 02005

Oleg Zavyalov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402005

• Abstract
• PDF (469.6 KB)
• References

Open Access

Optimization of the parameters of the piston pin bearing of the tractor engine taking into account the solution of the lubrication problem 02006

Oleg Zavyalov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402006

• Abstract
• PDF (726.8 KB)
• References

Open Access

Systematization of the definitions characterizing the content of services provided by industrial enterprises 02007

Nikolay Revenko, Tatyana Berkutova and Olga Silivanova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402007

• Abstract
• PDF (395.8 KB)
• References

Open Access

Method for constructing an equivalent mechanical model of an elastic system of a machine with various technological equipment 02008

Sergey L. Vasilevykh, Alexandr V. Udalov and Evgeniy S. Shelihov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402008

• Abstract
• PDF (463.0 KB)
• References

Open Access

Control system for electrohydraulic drive of a mobile sinking hoisting plant 02009

Anton Kurochkin, Vladimir Vagin, Anton Karpesh and Natalja Dyorina

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402009

• Abstract
• PDF (392.2 KB)
• References

Open Access

Stability of a mine excavator with a variable cab position 02010

Vladimir Velikanov, Natalja Dyorina and Olga Panfilova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402010

• Abstract
• PDF (551.8 KB)
• References

Open Access

Using business process improvement concept to optimize enterprise production system in conditions of innovative economic development 02011

Elena S. Palkina

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402011

• Abstract
• PDF (330.0 KB)
• References

Open Access

Ultrasonic flaw detection capabilities at first stage of technological process of ship engine overhaul 02012

Alexander Ilyakhinskiy, Vladimir Rodyushkin and Evgeniy Berezin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402012

• Abstract
• PDF (397.8 KB)
• References

Open Access

Coefficients determination of fuzzy products rules in a fuzzy model for excavators’ ergonomics estimation 02013

Vladimir Velikanov, Natalja Dyorina, Igor Usov and Igor Usov (jr)

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402013

• Abstract
• PDF (518.3 KB)
• References

Open Access

Optimization of reactive power consumption regimes by the electric centrifugal pumps installations 02014

Vladimir Kopyrin, Oleg Smirnov and Marina Deneko

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402014

• Abstract
• PDF (578.6 KB)
• References

Open Access

Research on optical flat models of stresses in the crankpin of internal combustion engine 02015

Olga Zhed, Vladimir Kopylov and Adolf Koshelenko

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402015

• Abstract
• PDF (975.4 KB)
• References

Open Access

Wave resistance to the movement of objects along the rocket track guides 02016

Vladimir Erofeev, Elena Lissenkova and Alexey Malkhanov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402016

• Abstract
• PDF (373.9 KB)
• References

Open Access

Organizational-economic conditions of maintenance of the accelerated development of machine-building branch 02017

Olga Vorontsova, Albert Isaev and Dmitry Stratan

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402017

• Abstract
• PDF (351.5 KB)
• References

Open Access

The influence of technology transfer on the formation of the innovative potential of the machine-building industry 02018

Olga Vorontsova, Igor Savon and Svetlana Gritzunova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402018

• Abstract
• PDF (364.8 KB)
• References

Open Access

Experimental research in automobile non-pneumatic tire force heterogeneity 02019

Vladimir Mazur

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402019

• Abstract
• PDF (491.0 KB)
• References

Open Access

Method of identification of parameters of closed planetary train based on exploratory design 02020

Ildar Kutlubaev, Elena Matcko and Olga Panfilova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402020

• Abstract
• PDF (436.2 KB)
• References

Open Access

Mechanics of diagnostic machine on electrical transmission lines conductors 02021

Mohammad Reza Bahrami

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402021

• Abstract
• PDF (661.9 KB)
• References

Open Access

Mathematical modeling of making mechanical engineering products based on an information model 02022

Aleksey Govorkov, Mariya Lavrenteva and Igor Fokine

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402022

• Abstract
• PDF (504.3 KB)
• References

Open Access

Analytical testing and methods for increasing the durability of plunger hydraulic cylinders 02023

Aleksandr Antsupov, Viktor Antsupov and Mikhail Slobodianskii

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402023

• Abstract
• PDF (612.6 KB)
• References

Open Access

On the issue of formation the air noise component at workplaces of the diesel locomotives crews 02024

Ivan Yaitskov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402024

• Abstract
• PDF (422.0 KB)
• References

Open Access

Finite element method application to calculate the friction discs of the hydromechanical transmission control system 02025

Alexey Khomichev and Ilya Trusevich

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402025

• Abstract
• PDF (515.0 KB)
• References

Open Access

Investigation of the process of controlled starting of the open-pit locomotive for ensuring the maximum adhesion coefficient at the starting 02026

Ambartsum Keropyan, Yuriy Babichev and Pavel Sizin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402026

• Abstract
• PDF (450.3 KB)
• References

Open Access

Thermo-ultrasound method for determining the damage of structural material 02027

Alexander Gonchar, Vasily Mishakin and Konstantin Kurashkin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402027

• Abstract
• PDF (550.4 KB)
• References

Open Access

Efficiency increase in excavation control as primary reserve of performance increase for open-pit excavators 02028

Olga Lukashuk, Konstantin Letnev and Anatoliy Komissarov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402028

• Abstract
• PDF (513.5 KB)
• References

Open Access

Research of heat stresses in components of blast furnace tuyere 02029

Yuriy Tarasov, Alexandr Radyuk and Sergey Gorbatyuk

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402029

• Abstract
• PDF (890.6 KB)
• References

Open Access

Ensuring the amphibious capabilities of the amphibious vehicle based on the hydrodynamic buoyancy principle 02030

Sergei Abdulov, Ilya Trusevich and Alexander Volkov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402030

• Abstract
• PDF (762.3 KB)
• References

Open Access

Perfection of constructive schemes of drive of running equipment of a career motor transport 02031

Yuliya Lagunova, Igor Ivanov and Sergey Horoshavin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402031

• Abstract
• PDF (863.1 KB)
• References

Open Access

The systems of the active rigidity and their application in transport machine 02032

Aleksandr Kudryashov, Ekaterina Igumensheva and Olesya Kopylova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402032

• Abstract
• PDF (529.9 KB)
• References

Open Access

Bending strength assessment of chemically-heat-strengthened Novikov gearing 02033

Alexey Beskopylny, Nikolay Onishkov and Victor Korotkin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402033

• Abstract
• PDF (606.3 KB)
• References

Open Access

The modeling of an anthropomorphic robot arm 02034

Aleksey Kabanov and Aleksey Balabanov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402034

• Abstract
• PDF (708.6 KB)
• References

Open Access

Theoretical study of electrical contact dustiness impact on the transition resistance 02035

Ekaterina Lyuminarskaja, Igor Lyuminarsky and Kirill Selivanov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402035

• Abstract
• PDF (464.7 KB)
• References

Open Access

Rationale construction of individual elements of technological complex 02036

Kirill Nemtinov, Alexsey Eruslanov and Yulia Nemtinova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402036

• Abstract
• PDF (1.103 MB)
• References

Open Access

Oscillation damping in the power unit when starting the engine equipped with the Common Rail system 02037

Igor Taratorkin, Victor Derzhanskii and Alexander Taratorkin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402037

• Abstract
• PDF (562.9 KB)
• References

Open Access

Stabilization of transport tracked vehicle trajectory 02038

Igor Taratorkin, Victor Derzhanskii and Alexander Volkov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402038

• Abstract
• PDF (625.4 KB)
• References

Open Access

Analysis viscoelastic properties of fiber-reinforced composite spring for the all-terrain vehicle 02039

Kirill B. Evseev, Aleksander B. Kartashov, Idris Z. Dashtiev and Aleksey V. Pozdeev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402039

• Abstract
• PDF (1.054 MB)
• References

Open Access

Static analysis and parameters synthesis of planetary-layshaft transmissions with three power flows 02040

Konstantin Salamandra

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402040

• Abstract
• PDF (680.6 KB)
• References

Open Access

Mathematical model of orientation of a ferromagnetic particle in magnetic field 02041

Eugene Masyutkin, Vasilii Masyagin and Boris Avdeyev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402041

• Abstract
• PDF (385.4 KB)
• References

Open Access

Dynamic loading of a water jet propulsion drive of amphibious vehicles 02042

Sergey Abdulov, Alexander Taratorkin and Pavel Nenashev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402042

• Abstract
• PDF (1.395 MB)
• References

Open Access

Stabilization of vibrations of rotary machines in radial sliding bearings with integrated liquid 02043

Aleksandr Kiryukhin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402043

• Abstract
• PDF (526.8 KB)
• References

Open Access

Nonlinear waves in an elastic guide interacting with an elastic-inertial foundation 02044

Vladimir Erofeev, Daniil Kolesov and Anna Leonteva

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402044

• Abstract
• PDF (459.2 KB)
• References

Open Access

Technology of calculation of the number of sensors sufficient for accurate measurement of the ice load pressure on the walls of the oil platform 02045

Sergei Glech, Veronika Dushko, Irina Blagovidova and Vadim Kramar

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402045

• Abstract
• PDF (486.7 KB)
• References

Open Access

Features of designing hydraulic excavator in APM WinMachine 02046

Viktor Shestakov, Pavel Babenkov and Sergey Horoshavin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402046

• Abstract
• PDF (813.3 KB)
• References

Open Access

Improving the economic efficiency of Russian industrial enterprises 02047

Maria Mechikova, Nataliya Zemlyakova and Ekaterina Medjuha

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402047

• Abstract
• PDF (464.7 KB)
• References

Open Access

Improvement in billets quality from billet caster by roller suspension of secondary cooling zone stiffening 02048

Mariya Androsenko, Ekaterina Kulikova and Olga Osipova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402048

• Abstract
• PDF (641.6 KB)
• References

Open Access

Innovative development of Russian enterprises 02049

Maria Mechikova, Nataliya Kovaleva and Olga Vorontsova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402049

• Abstract
• PDF (359.5 KB)
• References

Open Access

The reduced modulus of elasticity of a layered half-space 02050

Peter Ogar, Artem Kozhevnikov and Vyacheslav Fedorov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402050

• Abstract
• PDF (436.1 KB)
• References

Open Access

Relative contact area in metal-polymer joints 02051

Peter Ogar, Yurij Alpatov and Denis Gorokhov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402051

• Abstract
• PDF (534.7 KB)
• References

Open Access

Usage of the device keeping the driver from falling asleep as a factor in reducing road accidents 02052

Andrey Bogdanov, Svetlana Popova, Anton Kalugin and Vitaliy Ivanov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402052

• Abstract
• PDF (675.3 KB)
• References

Open Access

Modeling and analysis of the effectiveness of dynamic models of complex automated systems of machine-building production 02053

Andrei A. Cherepashkov and Pavel A. Samoylov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402053

• Abstract
• PDF (443.5 KB)
• References

Open Access

Plough calculation peculiarities for walking tractors 02054

Sergey Ovsyannikov and Evgeniy Kalinin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402054

• Abstract
• PDF (412.4 KB)
• References

Open Access

Chaotic dynamics of a pulse modulated control system for a heating unit 02055

Yuriy A. Gol’tsov, Alexander S. Kizhuk and Vasiliy G. Rubanov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402055

• Abstract
• PDF (473.1 KB)
• References

Open Access

The test bench of a cascade heatpump installation of a heat power complex for highly effective use secondary and renewables 02056

Vladimir Papin, Roman Bezuglov and Elena Veselovskaya

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402056

• Abstract
• PDF (682.5 KB)
• References

Open Access

Parametric diagnostics of the condition of a dual-flow turbojet engine using neural network simulation of the operating process 02057

Anas S. Gishvarov and Julien Celestin Raherinjatovo

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402057

• Abstract
• PDF (1.251 MB)
• References

Open Access

Modeling of turbine wheel assemblies taking into account the deformation of parts 02058

Mariya V. Yanyukina and Mikhail A. Bolotov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402058

• Abstract
• PDF (297.3 KB)
• References

Open Access

A method of predicting the time of failure of a rolling bearing 02059

Dmitry Liakhmanov, Vasily Gay and Igor Polyakov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402059

• Abstract
• PDF (453.7 KB)
• References

Open Access

Information models for problems solving of hardware design of multi-range chemical industries 02060

Vladimir Mokrozub, Evgeniy Malygin and Vladimir Nemtinov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402060

• Abstract
• PDF (925.7 KB)
• References

Open Access

Certification tests of a protective device such as ROPS to ensure safe usage of tractors 02061

Irina Troyanovskaya and Anton Kalugin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402061

• Abstract
• PDF (681.4 KB)
• References

Open Access

The analysis of methods effectiveness of automated non-destructive testing of products based on Data Mining methods 02062

Maksim V. Ovechkin, Eugeniy S. Shelihov and Julia I. Ovechkina

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402062

• Abstract
• PDF (798.2 KB)
• References

Open Access

A study of reconfigurable production system performance 02063

Alexey Kapitanov, Vladimir Mitrofanov and Sergey Egorov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402063

• Abstract
• PDF (329.7 KB)
• References

Open Access

Analysis of oscillations of a mechanical system with inertial exciters at an alternating position of it’s mass center 02064

Sergey Eremeykin, Grigory Panovko and Alexander Shokhin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402064

• Abstract
• PDF (444.1 KB)
• References

Open Access

The information model of the modern digital production 02065

Alexey Kapitanov, Aleksandra Kozlova and Sergey Tyasto

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402065

• Abstract
• PDF (340.7 KB)
• References

Open Access

Distributed impact elements and their use in modelling vibration fields in machines structures 02066

Vitaly Krupenin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402066

• Abstract
• PDF (608.0 KB)
• References

Open Access

Peculiarities of calculation the running resistances of the wire across the guides wire-tying machines 02067

Aleksandr Kudryashov, Olesya Kopylova and Aleksandr Kozyr

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402067

• Abstract
• PDF (567.3 KB)
• References

Open Access

Improving the efficiency of the roller screen with circular disks 02068

Alexander Kondratiev, Sergei Smorodov, Vitaliy Antsev and Andrei Kirichek

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402068

• Abstract
• PDF (436.9 KB)
• References

Open Access

Principles of innovative reproduction strategic planning of the enterprises fixed assets in rocket and space industry 02069

Andrey Boyko, Vladislav Kukartsev and Alena Stupina

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402069

• Abstract
• PDF (310.0 KB)
• References

Open Access

Bioinspirated algorithm for multi-criterial problem solution of production schedule optimization 02070

Olga Chengar, Victoria Shevchenko and Dmitrii Voronin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402070

• Abstract
• PDF (650.3 KB)
• References

Open Access

Technology of computing risks visualization for distributed production infrastructures 02071

Dmitrii Voronin, Victoria Shevchenko and Olga Chengar

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402071

• Abstract
• PDF (769.0 KB)
• References

Open Access

Detecting changes simulation of the technological objects’ information states 02072

Aleksandr Skatkov, Aleksey Bryukhovetskiy, Dmitriy Moiseev and Raisa Litvinova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402072

• Abstract
• PDF (636.2 KB)
• References

Open Access

Influence of elements thickness of separation devices on the finely dispersed particles collection efficiency 02073

Andrey V. Dmitriev, Vadim E. Zinurov and Oksana S. Dmitrieva

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402073

• Abstract
• PDF (417.6 KB)
• References

Open Access

Analysis of the applicability of die pressing method for ring-shaped parts fabrication 02074

Vladislav Lavrinenko, Anastasiya Polyakova and Artyom Polyakov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402074

• Abstract
• PDF (665.9 KB)
• References

Open Access

Assessment of the bearing capacity of welded joints for an arbitrary character of failure 02075

Valery Erofeev, Robert Sharafiev and Olga Grebenshchikova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402075

• Abstract
• PDF (501.1 KB)
• References

Open Access

Transporting devices for grain with new types of working units from polymeric materials 02076

Andrey Dorochov, Maksim Moskovskiy and Mikhail Chaava

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402076

• Abstract
• PDF (781.8 KB)
• References

Open Access

Evaluation of the running parameters of the polar cranes installed in the NPP reactor compartments during their control assembly 02077

Yuri I. Pimshin, Yuri V. Zayarov and Ivan Yu. Pimshin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402077

• Abstract
• PDF (736.0 KB)
• References

Open Access

Development and research of the rotating lever object as a dynamic model of a cycle mechanism 02078

Viktor Telegin, Alexander Kozlov and Tatyana Shumilova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402078

• Abstract
• PDF (630.5 KB)
• References

Open Access

Efficiency of cooling the water droplets within Jet-Film unit of cooling tower filler 02079

Ilnur N. Madyshev, Oksana S. Dmitrieva and Andrey V. Dmitriev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402079

• Abstract
• PDF (403.6 KB)
• References

Open Access

The main directions of the development of snowmobiles in the Russian Federation 02080

Aleksey S. Diakov, Aleksey V. Pozdeev and Vyacheslav V. Novikov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402080

• Abstract
• PDF (1012 KB)
• References

Open Access

Experimental evaluation of the operational properties of snowmobile motor vehicles 02081

Vladislav Klubnichkin and Evgeny Klubnichkin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402081

• Abstract
• PDF (437.2 KB)
• References

Open Access

Experimental evaluation of traction and coupling properties of snowmobile motor vehicles 02082

Evgeny Klubnichkin and Vladislav Klubnichkin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402082

• Abstract
• PDF (436.7 KB)
• References

Open Access

Systematization and comparative scheme analysis of mechanisms of planetary rotary hydraulic machines 02083

Gleb Volkov and Vladimir Smirnov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402083

• Abstract
• PDF (460.9 KB)
• References

Open Access

Design of a device for rocks strength properties determining to solve the tasks of rock rock-cutting machines design 02084

Leonid T. Dvornikov and Viktor A. Korneyev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402084

• Abstract
• PDF (500.4 KB)
• References

Open Access

Investigation of the vibration state of the turbine rotor taking into account the influence of geometric accuracy of parts 02085

Michail Bolotov, Vadim Pechenin and Ekaterina Kolchina

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402085

• Abstract
• PDF (385.4 KB)
• References

Open Access

System of providing sustainability of tower cranes from overturn in extreme wind loads 02086

Pavel Sorokin, Alexey Mishin, Vitaliy Antsev and Alexey Red’kin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402086

• Abstract
• PDF (561.3 KB)
• References

Open Access

Hydraulic technological machines with adaptive drive structure 02087

Mikhail Lemeshko, Mikhail Molev and Igor Golovin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402087

• Abstract
• PDF (455.3 KB)
• References

Open Access

The robotized stand for the diagnosing compression refrigerating machines 02088

Sergey Petrosov, Michael Lemeshko and Alexander Kozhemyachenko

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402088

• Abstract
• PDF (500.3 KB)
• References

Open Access

Reliability research of eccentric freewheel mechanisms of friction type 02089

Oleg Sharkov, Sergey Koryagin and Nikolay Velikanov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402089

• Abstract
• PDF (468.4 KB)
• References

Open Access

Technical condition parameters affecting the period of safe operation of technological pipelines 02090

Petr Kulakov, Aleksey Rubtsov, Vitaly Afanasenko and Veronica Gracheva

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402090

• Abstract
• PDF (1.148 MB)
• References

Open Access

Durability of metal structures under quasi-static load 02091

Dmitriy Ogorelkov, Vladimir Mironov and Olga Lukashuk

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402091

• Abstract
• PDF (487.8 KB)
• References

Open Access

Simulation of the capillary action via FlowVision software 02092

Lenar Ishbulatov, Sergey Galyshev, Pavel Solovev and Andrey Aksenov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402092

• Abstract
• PDF (439.5 KB)
• References

Open Access

An approach to technological equipment performance information visualization system construction using augmented reality technology 02093

Viktor Chekryzhov, Ilya A. Kovalev and Anton S. Grigoriev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402093

• Abstract
• PDF (872.6 KB)
• References

Open Access

Methodology of technological and operational factors accounting in the process of complex optimal design of microand nanodevices manufactured using group technologies 02094

Sergey Meshkov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402094

• Abstract
• PDF (495.3 KB)
• References

Open Access

Reliability prediction of RFID passive tags power supply systems based on RTD under given operating conditions 02095

Mstislav Makeev, Vladimir Sinyakin and Sergey Meshkov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402095

• Abstract
• PDF (570.6 KB)
• References

Open Access

Establishment of production of special wheel and track technology for extreme natural-climate conditions of the Arctic 02096

Alex S. Diakov and George O. Kotiev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402096

• Abstract
• PDF (288.6 KB)
• References

Open Access

Evaluation of efficiency of buses “Volgabus” with determination of critical values of vibration acceleration of transmission 02097

Galina Chernova, Aleksey Sinkov and Yuriy Moiseev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402097

• Abstract
• PDF (816.9 KB)
• References

Open Access

Simulation modeling of the curvilinear motion of an industrial tractor with a differential rotation mechanism and tracking trajectory stabilization system 02098

Sergey V. Kondakov, Aleksandr A. Dyakonov and Nikita V. Dubrovskiy

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402098

• Abstract
• PDF (480.1 KB)
• References

Open Access

The research of the parameters of a vibration machine for composite materials compaction 02099

Alexander Maslov and Janar Batsaikhan

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402099

• Abstract
• PDF (550.9 KB)
• References

Open Access

Mathematical model of the volumetric hydrodrive’s dynamics, sensitive to the loading variation 02100

Alexandra Ivanovskaya and Vladimir Popov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402100

• Abstract
• PDF (503.4 KB)
• References

Open Access

Determination of output-input ratio of mobile machine wheeled mover 02101

Nikolay Artyomov, Mikhail Podrigalo, Aziz Abdulgazis and Umer Abdulgazis

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402101

• Abstract
• PDF (376.5 KB)
• References

Open Access

Analyzing the dynamics of a single car wheel 02102

Nikolay Artyomov, Mikhail Podrigalo and Aziz Abdulgazis

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402102

• Abstract
• PDF (612.3 KB)
• References

Open Access

Analysis of methods of assessing the quality of protective paint car coatings 02103

Arthur Avakov, Evgeny Kosenko, Ivan Topilin and Fedor Kopilov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402103

• Abstract
• PDF (659.5 KB)
• References

Open Access

Digital technologies in questions of automated manufacturing management systems 02104

Michail Shutikov, Kirill Ponomarev, Alexander Feofanov and Tat’jana Grishina

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402104

• Abstract
• PDF (391.3 KB)
• References

Open Access

Automated verification of compliance of technical documentation of an enterprise in the conditions of digital technology 02105

Alexander Feofanov and Nataliya Bondarchuk

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402105

• Abstract
• PDF (250.6 KB)
• References

Open Access

Synthesis of methods and principles of ensuring the reliability of one-off and serial production machines 02106

Valery Kasyanov, Viktor Deryushev, Evgeny Kosenko, Vera Kosenko and Alina Y. Golubeva

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402106

• Abstract
• PDF (342.9 KB)
• References

Open Access

Endurance tests of single machines production 02107

Valery Kasyanov, Viktor Deryushev, Leonid Shulkin, Evgeny Kosenko and Anastasia Kotesova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402107

• Abstract
• PDF (574.9 KB)
• References

Open Access

Non-exponential networks in production 02108

Alexander Popov and Rustem Valiev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402108

• Abstract
• PDF (269.9 KB)
• References

Open Access

Active reduction of elastic objects oscillation tasks 02109

Aleksandr Bokhonsky, Vasiliy Golovin and Mikhail Maistrishin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402109

• Abstract
• PDF (586.8 KB)
• References

Open Access

Smart search for optimal technological processes in cyber-physical systems 02110

Vasiliy Golovin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822402110

• Abstract
• PDF (342.5 KB)
• References

Open Access

Revealing the technological modes range for ultrasonic surface hardening of cast iron 03001

Yulia Semenova, Yuri Nikitin and Andrey Rakhimyanov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822403001

• Abstract
• PDF (613.9 KB)
• References

Open Access

Influence of hard alloys CEDG modes on the size of dissolved layer 03002

Olga Medvedeva, Pavel Arkhipov and Alexander Yanyushkin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822403002

• Abstract
• PDF (803.7 KB)
• References

Open Access

Efficiency of use of the solid-state YAG: Nd-Laser for hardening of high-strength cast iron VCH 70-3 03003

Maxim Ivanov, Oleg Burlachenko and Alexandr Lyashenko

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822403003

• Abstract
• PDF (429.3 KB)
• References

Open Access

High thickness coating of zirconium dioxide for thermal protection of metal alloys 03004

Irina Tsareva, Olga Berdnik, Maksim Maximov and Victor Kuzmin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822403004

• Abstract
• PDF (1.639 MB)
• References

Open Access

Research of structural entropy of sheet aluminium alloys depending on annealing temperature 03005

Ekaterina Nosova, Fedor Grechnikov and Natalia Lukonina

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822403005

• Abstract
• PDF (695.0 KB)
• References

Open Access

Modeling of the elastic characteristics of a long-fiber reinforced composite with an arbitrary orientation of the reinforcing fibers 03006

Victor P. Pavlov, Vilina M. Kudoyarova and Alexander A. Philippov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822403006

• Abstract
• PDF (492.7 KB)
• References

Open Access

Subminiature eddy current transducers for thickness measurement 03007

Sergey Dmitriev, Vladimir Malikov and Anatoly Sagalakov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822403007

• Abstract
• PDF (380.9 KB)
• References

Open Access

Investigation of the effect of the coating formed by microarc oxidation on the piston top on the thermal state of the internal combustion engine parts 03008

Niyaz Musin and Natalia Dudareva

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822403008

• Abstract
• PDF (521.9 KB)
• References

Open Access

Optimization of process of application plasma hardening coating 03009

Evgeniy Smolentsev, Anvar Kadyrmetov and Mikhail Kondratyev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822403009

• Abstract
• PDF (788.2 KB)
• References

Open Access

Assessment of steel mechanical characteristics of non-standard compact specimens under statistical tests 03010

Rim N. Khasanov, Aybulat S. Valiev and Iskander Kuzeev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822403010

• Abstract
• PDF (700.7 KB)
• References

Open Access

Evaluation of adhesion strength of protective coatings with Al powder by adhesion work of initial suspension towards metal surface 03011

Natalia Antonova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822403011

• Abstract
• PDF (538.9 KB)
• References

Open Access

The use of nanomodified heat storage materials for thermal stabilization in the engineering and aerospace industry as a solution for economy 03012

Alexander Shchegolkov, Aleksei Shchegolkov and Alevtina Demidova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822403012

• Abstract
• PDF (433.2 KB)
• References

Open Access

Heat storage materials based on polymers modified with functionalized carbon nanotubes 03013

Alexander Shchegolkov, Tatyana Dyachkova and Elena Burakova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822403013

• Abstract
• PDF (444.4 KB)
• References

Open Access

Nanomaterials in the power engineering industry: market trends and application prospects 03014

Elena Inshakova and Agnessa Inshakova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822403014

• Abstract
• PDF (541.4 KB)
• References

Open Access

Modelling of magnetic field and flux in objects having surface-hardening and transition layer 03015

Vladimir Kostin, Olga Vasilenko and Alexander Byzov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822403015

• Abstract
• PDF (364.7 KB)
• References

Open Access

Multiparameter method of surface hardening quality testing 03016

Vladimir Kostin, Olga Vasilenko and Alexander Byzov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822403016

• Abstract
• PDF (391.0 KB)
• References

Open Access

The method of smelting metals from charge with low metal content in a furnace with bottom electrodes and the first laboratory studies 03017

Oleg Kazak and Ilya Starodumov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822403017

• Abstract
• PDF (336.2 KB)
• References

Open Access

Influence of single-walled carbon nanotubes’ diameter and length on the thermal conductivity of polymer composites 03018

Zaw Ye Aung, Pavel Prosuntsov and Sergey Reznik

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822403018

• Abstract
• PDF (660.4 KB)
• References

Open Access

Development verification of coatings made from porous ceramic-matrix composite materials 03019

Sergey Reznik, Pavel Prosuntsov and Konstantin Mikhaylovskiy

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822403019

• Abstract
• PDF (1.659 MB)
• References

Open Access

Modern materials strengthening techniques by extreme effects 03020

Alexander M. Glezer

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822403020

• Abstract
• PDF (381.7 KB)
• References

Open Access

Interactive communication between the user and the computer-aided design system of shaft forging on presses 04001

Sergey Kanyukov, Anatoly Konovalov and Olga Muizemnek

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404001

• Abstract
• PDF (440.3 KB)
• References

Open Access

Using of machine parts abstract elements in nc-programs developing for the cnc machines 04002

Mihail Nazarov, Evgeny Kiselev and Aleksey Popovich

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404002

• Abstract
• PDF (416.3 KB)
• References

Open Access

Numerical simulation of the non-regular mode of cooling a high-temperature metal billet by the flow of a gas-liquid medium 04003

Sergey Makarov, Vyacheslav Dement’yev, Tat’yana Makhneva and Elena Makarova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404003

• Abstract
• PDF (1.104 MB)
• References

Open Access

Application of multiset theory for the selection of the single result from alternatives aggregate obtained using different decision methods 04004

Denis Solovjev, Inna Solovjeva and Yuri Litovka

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404004

• Abstract
• PDF (401.5 KB)
• References

Open Access

Neural network for decision support to determine the operating mode of lined equipment 04005

Vitaliy Yemelyanov, Nataliya Yemelyanova and Alexey Nedelkin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404005

• Abstract
• PDF (609.7 KB)
• References

Open Access

Improving the operation quality of technical systems using information theory models 04006

Aleksander Dulesov, Denis Karandeev and Natalia Dulesova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404006

• Abstract
• PDF (383.5 KB)
• References

Open Access

Semi-Markov model of a technical system with calendar maintenance 04007

Sergey G. Glech, Yuriy E. Obzherin and Mikhail M. Nikitin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404007

• Abstract
• PDF (447.1 KB)
• References

Open Access

Semi-Markov model of a technical system with the component-wise instantly replenished time reserve 04008

Yuriy E. Obzherin, Stanislav M. Sidorov and Sergey N. Fedorenko

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404008

• Abstract
• PDF (422.6 KB)
• References

Open Access

Methods for road microprofile statistical data transformation 04009

Evgeniy Sarach, George Kotiev and Sergey Beketov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404009

• Abstract
• PDF (382.6 KB)
• References

Open Access

Using a parametric 3D assembly of a GTE combustion chamber to quickly generate its computed sector 04010

Maksim Nekhoroshev, Mikhail Orlov and Aleksandr Ryazanov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404010

• Abstract
• PDF (568.2 KB)
• References

Open Access

Modeling the run of a control program for turning a GTE disk compressor workpiece on a CTX Alpha 500 virtual dual-spindle CNC lathe 04011

Aleksandr Ryazanov and Aleksey Shvetsov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404011

• Abstract
• PDF (463.3 KB)
• References

Open Access

Eigenvibrations of a simply supported beam with elastically attached load 04012

Anton A. Samsonov, Sergey I. Solov’ev and Pavel S. Solov’ev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404012

• Abstract
• PDF (362.5 KB)
• References

Open Access

Investigation of eigenvibrations of a loaded bar 04013

Anton A. Samsonov and Sergey I. Solov’ev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404013

• Abstract
• PDF (321.9 KB)
• References

Open Access

Computation method of geometry die of stretch forming press 04014

Konstantin Bormotin and Win Aung

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404014

• Abstract
• PDF (490.6 KB)
• References

Open Access

Column press design optimization on the basis of stress-strain state’s mathematical modeling 04015

Sergey Karpushkin, Aleksey Glebov and Sergey Karpov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404015

• Abstract
• PDF (462.5 KB)
• References

Open Access

Mathematic simulation of the power interchange in the interbucket space of coaxially located impellers of the centrifugal turbo machine 04016

Sergey Podbolotov, Anatoly Kolga and Natalja Dyorina

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404016

• Abstract
• PDF (679.3 KB)
• References

Open Access

Investigation of the influence of perforation parameters on the acoustic efficiency of sound-absorbing structures 04017

Aleksandr N. Anoshkin, Pavel V. Pisarev and Karina A. Maksimova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404017

• Abstract
• PDF (667.1 KB)
• References

Open Access

Modeling of public transport waiting time indicator for the transport network of a large city 04018

Olga Lebedeva and Marina Kripak

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404018

• Abstract
• PDF (482.0 KB)
• References

Open Access

Modelling performing calculations over the data presented in a probabilistic form 04019

Nikolay Sapozhnikov, Aleksey Bryukhovetskiy, Aleksandr Polyakov and Dmitriy Moiseev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404019

• Abstract
• PDF (504.1 KB)
• References

Open Access

The vector optimization and modeling of a technical systems 04020

Leonid B. Matusov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404020

• Abstract
• PDF (394.9 KB)
• References

Open Access

Analysis of the execution time of multi-stage control operations with multiple measurements 04021

Vadim Kopp, Alexey Balakin, Natalya Balakina and Mikhail Zamoryonov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404021

• Abstract
• PDF (354.0 KB)
• References

Open Access

Verification of the protective steam curtain model by means of experiment’s results 04022

Rail Nasibullin, Sergey Valeyev and Ainur Galeyev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404022

• Abstract
• PDF (440.2 KB)
• References

Open Access

The approach of creating a particular postprocessor and using CNC measuring cycles 04023

Georgi M. Martinov, Anna V. Stas and Oleg A. Kudinov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404023

• Abstract
• PDF (488.8 KB)
• References

Open Access

Profiles of critical states in diagnostics of controlled processes 04024

Sergey Dubovik and Aleksey Kabanov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404024

• Abstract
• PDF (412.3 KB)
• References

Open Access

Assessment of mechanical characteristics of steel subject to cyclic loads effect on non-standard compact specimens 04025

Rim N. Khasanov, Aybulat S. Valiev and Iskander R. Kuzeev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404025

• Abstract
• PDF (734.5 KB)
• References

Open Access

Multi-server queue with batch arrivals 04026

Liubov Korolkova, Nematulla Mashrabov and Alexandr Murzin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404026

• Abstract
• PDF (393.0 KB)
• References

Open Access

Development of a technique of the automated construction of 3D models of standard mass transfer trays 04027

Rimma Tukaeva, Vitalliy Afanasenko and Petr Kulakov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404027

• Abstract
• PDF (987.4 KB)
• References

Open Access

Computer-aided design of resonance-free vibration systems 04028

Nikolai Muliukhin, Dmitriy Lobanov, Vladimir Grigoriev and Viktor Gartfelder

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404028

• Abstract
• PDF (541.1 KB)
• References

Open Access

The rolls calibration development and caliber drawings preparation with the computer software for the bent profiles production and straight-through pipes formation for laser welding 04029

Lyudmila Savina, Valeriy Savin and Valentin Osadchy

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822404029

• Abstract
• PDF (238.6 KB)
• References

Open Access

Experimental researches of determination of degree of interaction of a working organ with the object of treatment in plant growing 05001

Anna I. Belousova and Arkady V. Moiseev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405001

• Abstract
• PDF (608.3 KB)
• References

Open Access

Experimental researches of plant protection means 05002

Sergey V. Belousov and Anna I. Belousova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405002

• Abstract
• PDF (548.3 KB)
• References

Open Access

Calculation of magnetic devices cleaning coolants in the agro–industrial complex 05003

Boris Avdeyev, Victor Prosvirnin and Roman R. Dema

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405003

• Abstract
• PDF (530.1 KB)
• References

Open Access

Development of robotics technologies in agriculture 05004

Konstantin Mashkov, Vasyliy Rubtsov and Ivan Rubtsov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405004

• Abstract
• PDF (557.7 KB)
• References

Open Access

Development of environmentally friendly technologies with spiral movement of aggregates for landscape agriculture 05005

Sergey Strekalov, Lubov Strekalova and Mikhail Pertsev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405005

• Abstract
• PDF (601.2 KB)
• References

Open Access

Design of the universal agricultural working body and study of its parameters 05006

Sergey V. Belousov, Sergey A. Pomelyayko and Vladislav V. Novikov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405006

• Abstract
• PDF (747.9 KB)
• References

Open Access

Interaction of rotary working body of roller type with the object of processing 05007

Sergey K. Papusha, Azamat E. Bogus and Vladimir I. Konovalov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405007

• Abstract
• PDF (645.2 KB)
• References

Open Access

Justification of the design of pneumatic sorting machine for the preparation of selection seeds 05008

Viktor Khamyev, Anatoly Gulyev and Andrey Boiko

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405008

• Abstract
• PDF (452.0 KB)
• References

Open Access

Modernization of grinding machines of grain cleaning machines 05009

Aleksey Dorokhov, Victor Khamyev and Kirill Lepeshkin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405009

• Abstract
• PDF (444.7 KB)
• References

Open Access

Development of a set of working units from polymeric materials for the design of combine harvesters 05010

Andrey Izmailov, Maksim Moskovskiy and Dmitriy Podlesniy

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405010

• Abstract
• PDF (981.1 KB)
• References

Open Access

Justification of the construction of a self-propelled selection seeder with an intelligent seeding system 05011

Alexander Lavrov, Igor Smirnov and Maksim Litvinov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405011

• Abstract
• PDF (450.8 KB)
• References

Open Access

Graph model development in the context of the grain cleaning machine 05012

Andrey Butovchenko, Artem Dorochenko and Inna Kotelnikova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405012

• Abstract
• PDF (520.0 KB)
• References

Open Access

The modeling of the process of grain material outflow from a hopper bin with a lateral outlet 05013

Artyom Doroshenko, Andrey Butovchenko and Lyubov Gorgadze

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405013

• Abstract
• PDF (646.0 KB)
• References

Open Access

The determination of the single piece dispenser parameters 05014

Evgeny Smekhunov, Evgeny Chaika and Irina Gritsay

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405014

• Abstract
• PDF (480.1 KB)
• References

Open Access

Study of the sealing elements impact on air flow distribution in a seed vessel of seeding mechanism 05015

Anton Yu. Popov and Denis K. Muratov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405015

• Abstract
• PDF (547.2 KB)
• References

Open Access

Harrowing of sowings with synchronous additional fertilizing 05016

Alexander Serguntsov and Nikolai Malashikhin

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405016

• Abstract
• PDF (1.007 MB)
• References

Open Access

Analysis of the threshing process in the interriffle space of the threshing device 05017

Elena Fisunova, Leonid Groshev and Olga Baryshnikova

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405017

• Abstract
• PDF (448.2 KB)
• References

Open Access

Using the imitation model of elementary technological operation at the evaluation of the threshing action of the threshing device 05018

Elena Fisunova, Tatiana Lavrenova and Viktor Zharov

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405018

• Abstract
• PDF (518.9 KB)
• References

Open Access

Automatization of settings of working organs of technological process of combine harvester 05019

Yuri Tsarev, Elena Adamcikova and Martin Najie

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405019

• Abstract
• PDF (527.2 KB)
• References

Open Access

Features of designing feeding hoppers of loose materials of low productivity in agriculture 05020

Konstantin Timoleanov, Dmitry Savenkov and Lyubov Gorgadze

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405020

• Abstract
• PDF (549.8 KB)
• References

Open Access

Simulation of the process of movement of bulk material in a vibrating conveyor-mixer 05021

Tatiana Tupolskikh, Natalia Gucheva and Oleg Kirishiev

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405021

• Abstract
• PDF (647.6 KB)
• References

Open Access

Calculation of the working element for layer-by-layer soil-free tillage 05022

Sergei Kambulov, Igor Bozhko and Anastasia Olshevskaya

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405022

• Abstract
• PDF (370.9 KB)
• References

Open Access

Determination of the parameters of the hydrodynamic mixer 05023

Yuri Ivanov, Viktor Pakhomov, Sergei Kambulov and Dmitri Rudoi

Published online: 30 October 2018

DOI: https://doi.org/10.1051/matecconf/201822405023

• Abstract
• PDF (716.2 KB)
• References