Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
---|---|---|
Article Number | 01002 | |
Number of page(s) | 7 | |
Section | Manufacturing Technologies, Tools and Equipment | |
DOI | https://doi.org/10.1051/matecconf/201822401002 | |
Published online | 30 October 2018 |
Flat grinding model, considering internal dynamics of the process
Sevastopol State University, Department of Mechanical Engineering, 299053 Sevastopol, Russia
* Corresponding author: serg.bratan@gmail.com
The article considers the results of theoretical studies of the process of flat external grinding on the basis of the developed dynamic model. In order to take into account the influence of the statistical properties of the current deviations of the radius vectors of the grinding wheel and the thickness of the work piece, in addition to the input signal, a random process with the same stochastic characteristics as that of the current deviation of the radius vector of the grinding wheel and the billet topography is fed to the input of the system model. The corresponding random input signal can be obtained by means of a shaping filter. The output coordinate of the shaping filter according to its statistical parameters corresponds to the parameters of the components of the dynamic system characterizing the processes of the grinding wheel effect on the work piece during the grinding process. The developed mathematical model of the operation of flat external grinding can be used to determine the estimates of the quality characteristics of machined parts and systems for automatic control of the process of flat external grinding when the model is supplemented by dynamic links characterizing the statistical properties of the grinding wheel and work piece.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.