| Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
|---|---|---|
| Article Number | 02015 | |
| Number of page(s) | 6 | |
| Section | General problems of mechanical engineering: design, optimization, maintenance | |
| DOI | https://doi.org/10.1051/matecconf/201822402015 | |
| Published online | 30 October 2018 | |
Research on optical flat models of stresses in the crankpin of internal combustion engine
Peoples Friendship University of Russia (RUDN University), 6 Miklukho-Maklaya St, Moscow, 117198, Russian Federation
* Corresponding author: zhed_ov@rudn.university
The intensity of the contour strains of the oil channel is determined by the method of photomechanics in the consequence of the loads of the crankpin in the working cycle of the internal combustion engine. The studies have made it possible to establish the qualitative and quantitative composition of the stresses on the hole contour of the oil channel against deformation of the bending and torsion of its connecting rod.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.