MATEC Web Conf.
Volume 224, 2018International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|Number of page(s)||5|
|Section||Manufacturing Technologies, Tools and Equipment|
|Published online||30 October 2018|
Determination of shrinkage of weld
Immanuel Kant Baltic Federal University, 236041 Kaliningrad, Russia
* Corresponding author: firstname.lastname@example.org
A calculation-experimental technique of determination of weld shrinkage is described in that work. Experimentally, with the help of strain gauges, residual stresses are determined at two points, which are at known distances from the weld. Shrinkages are found out from the theoretical solution of the plane elasticity theory about the insertion of bodies with interference. Calculations have been carried out for experimental studies of a weld 400 mm long for different thicknesses of metal. It is found that when the thickness of the metal increases, the shrinkage values also increase. This is due to the fact that as the thickness of the metal increases, the heat input required to penetrate it also increases.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.