Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
---|---|---|
Article Number | 02040 | |
Number of page(s) | 7 | |
Section | General problems of mechanical engineering: design, optimization, maintenance | |
DOI | https://doi.org/10.1051/matecconf/201822402040 | |
Published online | 30 October 2018 |
Static analysis and parameters synthesis of planetary-layshaft transmissions with three power flows
Mechanical Engineering Research Institute of the Russian Academy of Sciences (IMASH RAN), 101990, M. Kharitonyevsky per. 4, Moscow Russia
* Corresponding author: ksalamandra@yandex.ru
The increase in the number of transmission ratios in the vehicles gearboxes leads to an increase in the number of mechanisms used and their complication. One way to obtain simple designs of multi-speed transmissions with smaller number of gears, clutches, brakes and synchronizers is to use combinations of planetary differential gears and gears with fixed axes (planetary-layshaft transmissions). The article presents a static analysis of a planetary-layshaft transmissions with three parallel power flows for obtaining the dependencies between the gear ratios of the internal mechanisms and the speed ratios of the transmission. A technique for determination the gear ratios of the internal mechanisms for providing a close to a given series of transmission ratios is described.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.