MATEC Web Conf.
Volume 224, 2018International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|Number of page(s)||6|
|Section||General problems of mechanical engineering: design, optimization, maintenance|
|Published online||30 October 2018|
Peculiarities of calculation the running resistances of the wire across the guides wire-tying machines
Nosov Magnitogorsk State Technical University. Magnitogorsk, Russia
* Corresponding author: firstname.lastname@example.org
Wire rod manufacturers are interested in using their own materials for strapping coils. Therefore, the competitive advantage of manufacturers of wire-tying machines may be the possibility of using wire rod as a strapping material. At the same time, the rigidity of the rod causes great efforts to feed it along the guides around the strapped section. The presented technique for calculating can be used for the scientifically based design of wire feeders of prospective wire-tying machines.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.