MATEC Web Conf.
Volume 224, 2018International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|Number of page(s)||7|
|Section||Manufacturing Technologies, Tools and Equipment|
|Published online||30 October 2018|
Decomposition of milling operation
Sevastopol State University, Universitetskaya st.33, Sevastopol 299053, Russia
* Corresponding author: email@example.com
The article deals with the problem of improving the stability of quality parameters in the milling of molds, which provides for minimizing deviations from the set values that meet the requirements of the product drawing. For this purpose, a block diagram of the milling operation was developed and decomposition was carried out, which allowed to identify such subsystems, “workpiece”, “machine — tool”, “tool”, “contact zone”. The factors that lead to a decrease in the parameters of the quality of the surfaces of the workpiece are determined. The developed block diagram allowed to establish the relationship between the main components of the technological system and the characteristics of the machining process.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.