| Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
|---|---|---|
| Article Number | 01072 | |
| Number of page(s) | 7 | |
| Section | Manufacturing Technologies, Tools and Equipment | |
| DOI | https://doi.org/10.1051/matecconf/201822401072 | |
| Published online | 30 October 2018 | |
Calculation of linear technological dimensions with adaptation
1
Omsk State Technical University, Mira 11, Omsk, 644050, Russia
2
Sholom-Aleikhem Priamursky State University, Shirokaya 70a, Birobidzhan, 679015, Russia
* Corresponding author: masaginvb@mail.ru
Technological dimensional calculations are a necessary stage of engineering process and allow to determine machining allowance. The problem is that, when processing hard-to-treat materials on NC machines, it is necessary to provide optimal processing conditions for each workpiece based on reliable information on allowances at each operation. However, according to the existing methodology for calculation of technological dimensions and, accordingly, allowances, for the hypothetical workpiece with wide dimensional tolerances the technological dimensions and allowances are determined once, while it is assumed that the specific workpiece must engage with the tolerances of the hypothetical workpiece. The article deals with an example of calculating linear technological dimensions with adaptation, based on the results of monitoring and performing a separate calculation of the dimensions and allowances for each concrete workpiece in each operation. The calculation is carried out using a processing scheme, a graph, equations of dimensional chains and a computer program. As a result of the study, it was found that the calculation of linear technological dimensions with adaptation makes it possible to determine the actual values of allowances at each transition and thereby ensure predictable processing conditions.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.