Open Access
| Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
|---|---|---|
| Article Number | 01046 | |
| Number of page(s) | 6 | |
| Section | Manufacturing Technologies, Tools and Equipment | |
| DOI | https://doi.org/10.1051/matecconf/201822401046 | |
| Published online | 30 October 2018 | |
- Vereshchaka A.S. Rabotosposobnost’ rezhushchego instrumenta s iznosostojkimi pokrytiyami. / Vereshchaka A.S. -M.: Mashi-nostroenie, 1993. — 336 s.:il. — (B-ka instrumental’shchika). — ISBN 5-217-01482-2. [Google Scholar]
- Grigor’ev, S.N. Metody povysheniya stojkosti rezhushchego instrumenta: uchebnik dlya studentov vtuzov [EHlektronnyj resurs] : ucheb. — EHlektron. dan. — Moskva : Mashinostroenie, 2009. — 368 s. [Google Scholar]
- Vasin S.A. Rezanie materialov: Termo-mekhanicheskij podhod k sisteme vzaimosvyazej pri rezanii: uchebnik dlya tekhnicheskih vyzov. / S.A. Vasin, A.S. Vereshchaka, V.S. Kushner – M.: Izd-vo MGTU im. N.EH. Baumana, 2001.-448 s. [Google Scholar]
- Loladze T.N. Prochnost’ i iznosostoj-kost’ rezhushchego instrumenta. / T.N. Loladze M.: Mashinostroenie, 1982. 320 s. [Google Scholar]
- Makarov, A.D. Optimizaciya processov rezaniya. / A.D. Makarov, 2-e izd. – M.: Mashi-nostroenie, 1976. – 278. [Google Scholar]
- Poletika, M.F. Kontaktnye nagruzki i tem-peratury na iznoshennom instrumente. / M.F. Poletika, V.N. Kozlov // Progressivnye tekhnologicheskie processy v mashinostroenii: Sbornik nauchnyh trudov. Tomsk: TPU, 1997. s.18–21. [Google Scholar]
- Silin S.S. Metod podobiya pri rezani metallov / S.S. Silin – M.: Mashinostroenie, 1979.152 s. [Google Scholar]
- Zorev N.N. Untersuchung der Kintakt-spannunger auf den Arbeits-flachen des Werkzeugs miteiner Schneidenabrundung / Zorev N.N., Uteshev M.H. – Berichte der Internationalen Forschungesgemein-schaft fur mechanische produktionstechniktionstechnik Vol. 20-1 Schweiz, 1971. [Google Scholar]
- Shalamov V.G. Savel’ev D.A., Smetanin S.D. Producing powder by rotary grinding. Aller-ton Press, Inc. (New York) Volume 33, Issue 3, 2013, Pages 133–135 DOI: 10.3103/S1068798X13030167 [Google Scholar]
- Neugebauer, R., Hochmuth, C. Schmidt, G., Dix, M. Energy efficient process planning based on numerical simulations. Advanced Materials Research 2011, Volume 223, Pages 212–221, 17th CIRP Conference on Modelling of Machining Operations; Sintra; Portugal; 12 May 2011 до 13 May 2011. DOI: 10.4028/www.scientific.net/AMR.223.212. [CrossRef] [Google Scholar]
- Zhang, H., Fang, Z.Z., Lu, Q. Characterization of a bilayer WC-Co hardmetal using Hertzian indentation technique. International Journal of Refractory Metals and Hard Materials Volume 27, Issue 2, March 2009, Pages 317–322. DOI: 10.1016/j.ijrmhm.2008.07.014. [CrossRef] [Google Scholar]
- Artamonov E.V., Prochnost’ i raboto-sposobnost’ smennyh tverdosplavnyh plastin sbornyh rezhushchih instrumentov, Tyumen’, Vektor Buk, 2003, 190. ISBN: 5-88465-416-2. [Google Scholar]
- Vasilega, D.S., Shtin, A.S., Method for the determination of hard alloys’ maximum performance temperature in the context of the metal-cutting tools’ usage quality estimation technique.// Key Engineering Materials 737 M, c. 59–63, 2017. [CrossRef] [Google Scholar]
- Artamonov E.V., Vasilega D.S., Tverya-kov A.M., Opredelenie temperatury maksimal’noj rabotosposobnosti tverdosplavnyh rezhushchih plastin na osnove ehlektricheskoj provodimosti. // Zavodskaya laboratoriya. Diagnostika materialov. T. 80. № 9, 36–39. [Google Scholar]
- Tveryakov, A.M., Shtin, A.S., Setup for determining the maximum temperature for in-creased performance longevity of replaceable cutting discs.// AIP Conference Proceedings, 1785,040088, 2016. DOI: 10.1063/1.4967145. [Google Scholar]
- Patent RF №172959 MPK B23B1/00. Ustanovka dlya opredeleniya temperatury maksimal’noj rabotosposobnosti tverdosplavnyh rezhushchih plastin / E.V. Artamonov, A.M. Tveryakov, A.S. SHtin Zayavka №2016130884 ot 26.07.2016. Opubl. 02.08.2017 Byul.№22. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.