Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
---|---|---|
Article Number | 05019 | |
Number of page(s) | 5 | |
Section | Agricultural Engineering | |
DOI | https://doi.org/10.1051/matecconf/201822405019 | |
Published online | 30 October 2018 |
Automatization of settings of working organs of technological process of combine harvester
Don State Technical University, Gagarin square 1, Rostov-on-Don, 344000, Russia
* Corresponding author: ycarev@donstu.ru
The development of scientific and technological progress is currently in the direction of the introduction of electronic control systems that can help a human being in everyday affairs that does not require special creativity, for example, in unmanned driving, in aviation - the inclusion of an autopilot. The same happens in agricultural machinery. So in the modern harvester uses a system of precision agriculture, however, has reached the introduction of electronic systems that would regulate the optimum process flow of the operations, to take account of changing agricultural conditions on the field. Everything necessary for this purpose in combine harvesters is, it is electric and hydraulic drives that regulate the speed of the combine, the speed of rotation of the reel, the speed of rotation of the threshing unit, the speed of the fan, the amount of opening of the blinds, etc. However, now the combine operator sets it all manually. In the DSTU for several years as a program for on-Board computer (BC) and received a Patent for the invention, allowing to start the implementation of the process setup of the combine in automatic mode, but often the developer is easier to buy something abroad than to design and implement.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.