| Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
|---|---|---|
| Article Number | 01104 | |
| Number of page(s) | 5 | |
| Section | Manufacturing Technologies, Tools and Equipment | |
| DOI | https://doi.org/10.1051/matecconf/201822401104 | |
| Published online | 30 October 2018 | |
The nature of the change of the surface temperature of the workpiece during hot rolling of pipe steel
1
Nosov Magnitogorsk State Technical University, Lenin Street, 38, Magnitogorsk city, Chelyabinsk Region, Russian Federation, 455000 psipsi@mail.ru
2
PJSC “MMK”, Magnitogorsk, Russia
* Corresponding author: psipsi@mail.ru
The article is devoted the experimental studies of deformation and temperature parameters of rolling the pipe steel on the rolling mill 5000 PJSC “MMK”. Knowledge of the regularities of the change in the surface temperature of work piece during hot rolling under the conditions of thermo mechanical deformation processes is of great theoretical and practical importance. The temperature conditions determine the energy and force parameters of rolling, as well as the mechanical properties and microstructure of the finished products. The experimental rolling was carried out in two stages: roughing at 6 passes at a temperature of 1050-900 ° C and finishing at 18-20 passes at a temperature below the start of the phase transformation of 900 ° C. The finishing rolling has been carried out in a two-phase region at the stage of polymorphic transformation in the steel. Significant differences in the nature of temperature changes at different stages of rolling are revealed.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.