| Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
|---|---|---|
| Article Number | 01097 | |
| Number of page(s) | 5 | |
| Section | Manufacturing Technologies, Tools and Equipment | |
| DOI | https://doi.org/10.1051/matecconf/201822401097 | |
| Published online | 30 October 2018 | |
Strengthening of materials by vibroimpact and combined methods with previous electrochemical processing
1
Voronezh State Technical University, 14, Moscow Avenue, 394026, Voronezh, Russia
2
Bryansk State Technical University, 7, 50-letiya Octyabrya Blvd, 394026, Bryansk, Russia
* Corresponding author: alexboldyrev@mail.ru.
The authors examine capabilities of vibroimpact strengthening after electrochemical processing of materials, also getting guaranteed cold work of the surface during simultaneous anodic dissolution and mechanic calibration. They propose the technique of electrochemical mechanical processing. This article contains the results of experimental investigations. This technique passed evaluation test during production of shell cases with high accuracy and guaranteed hole cold work. The received results give ground for affirmation that electrochemical processing that proceeds hardening enables great extension of technological capabilities of this method and successful continuation investigations directed at creation of lighter constructions with higher ultimate resistance at reversed loads.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.