Open Access
Issue
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
Article Number 01105
Number of page(s) 6
Section Manufacturing Technologies, Tools and Equipment
DOI https://doi.org/10.1051/matecconf/201822401105
Published online 30 October 2018
  1. A. K. Belan, M. S. Malysheva, O. A. Belan, Cold stamping of heads of rod products by method of cross extrusion: Monograph., Magnitogorsk: GOU VPO “MSTU”, 176 p., (2008) [Google Scholar]
  2. A. K. Belan, M. S. Malysheva, O. A. Belan, Improvement of the process of lateral extrusion on the basis of mathematical modelling, Forging and stamping production, Processing of materials by pressure, v. 8, pp. 19–25,(2008) [Google Scholar]
  3. A. K. Belan, O. A. Belan, Mechanics and energy-power parameters of the transverse extrusion process, Forging and stamping production, Processing of materials by pressure, v. 2, pp. 21–24, (2011) [Google Scholar]
  4. A. K. Belan, M. E Motorigin, O. A. Belan, Applied mechanics stability in the processing of metals by pressure, Publishing house of Magnitogorsk state Technical University G. I. Nosova, 218 p.,( 2011) [Google Scholar]
  5. A. K. Belan, O. A. Belan, The design of self-tapping screws and the technology of their production, Forging and stamping production, Processing of materials by pressure, v. 9, pp. 20–25, (2015) [Google Scholar]
  6. A. K. Belan, A. D. Kartunov, O. A. Belan, Development of design and production technology of self-tapping screws of increased strength in the conditions of MMK-METIZ. Modeling and development of metal forming processes, Magnitogorsk, State technical University G. I. Nosova, pp. 150–157, (2016) [Google Scholar]
  7. Stephen. P., Twickler R., Foxen Y., Vegeroth K., Methods of numerical modelling for the development of technological processes, Ferrous metals, Moscow, Metallurgy, v. 4, pp. 37–43, (1992) [Google Scholar]
  8. E. G. Diakonov, Numerical methods in continuum mechanics, Novosibirsk, USSR Academy of Sciences, v. 7, № 5, pp. 14–78, (1976) [Google Scholar]
  9. B. E. Pobedrya, Numerical methods in the theory of elasticity and plasticity, Moscow, MSU, P. 344/ (1981) [Google Scholar]
  10. G. Y. Gong, Mathematical modelling of metal forming processes, Moscow, Metallurgy, 352 p., (1983) [Google Scholar]
  11. A. M. Pesin, Modelling and development of asymmetric deformation to improve the efficiency of the sheet rolling, Dissertation for the degree of doctor of tech. sciences, Magnitogorsk, MSTU, (2003) [Google Scholar]
  12. Kopp R, Domain P. M., Modelling and design of rolling processes with the finite element method, Ferrous metals, Moscow, Metallurgy, v. 7, pp 62–68, (1990) [Google Scholar]
  13. V. A. Nekit, E. M. Drigun, Hot stamping the bottoms of railway tanks in the conditions of the Magnitogorsk metallurgical combine, Iron and steel, v. 11-12, pp. 68–70., (2000) [Google Scholar]
  14. V.A. Nekit, A. A. Pustovalov, A.V. Nekit, The method of determining the critical strain in uniaxial tension, Forging and stamping production, Processing of materials by pressure, 2003, No. 3, p. 29–30. [Google Scholar]
  15. V. A. Nekit, Neutral section in the hearth of plastic deformation during rolling of strips, Modelling and development of processes of processing of metals by pressure, v. 18, pp. 137–139, (2012) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.