| Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
|---|---|---|
| Article Number | 01068 | |
| Number of page(s) | 8 | |
| Section | Manufacturing Technologies, Tools and Equipment | |
| DOI | https://doi.org/10.1051/matecconf/201822401068 | |
| Published online | 30 October 2018 | |
Analysis of possibilities of high-speed prototyping technology in hot section manufacturing
Samara University, Department of Engine Technology, 443086 Moskovskoye Shosse 34, Samara
* Corresponding author: dobryshkina93@mail.ru
The article is devoted to the exercising of a trial technological process for the manufacture of gas turbine engine (GTE) hot sections by the example of a solid-cast nozzle block. To do this, the authors made up a plan of the experiment associated with the search for optimal conditions and parameters of a technological process of the sector master mold layer-by-layer synthesis from a photopolymeric material. The paper tracks the interconnection between the parameters of a 3D printing system Objet Eden 350 and the materials in the growing process by the PolyJet technology and mechanical properties of a master mold in the context of their influence on the surface layer quality and geometric accuracy of the final GTE parts’ casting. Based upon the analysis of the obtained research results and taking into account technical requirements, the authors managed to grow a nozzle block sector master mold, get wax models and conduct an experimental casting of a solid cast nozzle block wheel.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.