MATEC Web Conf.
Volume 224, 2018International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|Number of page(s)||6|
|Section||General problems of mechanical engineering: design, optimization, maintenance|
|Published online||30 October 2018|
Influence of elements thickness of separation devices on the finely dispersed particles collection efficiency
Kazan State Power Engineering University, 420066, Kazan, Krasnoselskaya str., 51, Russia
2 Kazan National Research Technological University, 420015, Kazan, Karl Marx str., 68, Russia
* Corresponding author: firstname.lastname@example.org
This article presents a rectangular separator, developed by the authors, for purification of a multiphase gas flow from the finely dispersed particles with a diameter of up to 10 µm. In order to increase the separation process efficiency, a research was conducted to determine the optimum thickness of I-beam elements within the separator at different values of the flow inlet rate and length of I-beam elements. It was found that change in the wall thickness of elements leads to a change in the flow structure, which causes a decrease in the dust particles collection efficiency.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.