Open Access
| Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
|---|---|---|
| Article Number | 04011 | |
| Number of page(s) | 6 | |
| Section | Modelling of Technical Systems. CAD/CAM/CAE Systems | |
| DOI | https://doi.org/10.1051/matecconf/201822404011 | |
| Published online | 30 October 2018 | |
- D.A. Lastochkin, D.L. Skuratov, V.N. Trusov, Process Optimization in Mechanical Engineering (Optimizatsiya tekhnologicheskikh protsessov v mashinostroyenii), Textbook, Samara: STAU, p. 87 2006 [Google Scholar]
- A.I. Ryazanov, D.L. Skuratov, I.A. Чигринев, Simulation, process design, and manufacturing of solids-of-revolution by means of small-size CNC lathes (Tekhnologii modelirovaniya, proyektirovaniya tekhprotsessov i izgotovleniya detaley tipa tel vrashcheniya na malorazmernykh tokarnykh stankakh s ChPU), Textbook, Samara: SSAU, p. 104 2013 [Google Scholar]
- A.I. Ryazanov, D.L. Skuratov, L.V. Solovatskaya, Organization of classes for the simulation, process design, and manufacturing of parts in ADEM CAD/CAM/CAPP using small OPTIMUM BF20 VARIO CNC mills (Organizatsiya uchebnykh zanyaty po modelirovaniyu, proyektirovaniyu tekhprotsessov i izgotovleniyu detaley v CAD/CAM/CAPP-sisteme ADEM s ispolzovaniyem malogabaritnykh frezernykh stankov OPTIMUM BF20 VARIO s ChPU), Engineering High-Tech (Vysokiye tekhnologii v mashinostroyenii), Samara: SamSTU, pp. 149–152 2013 [Google Scholar]
- A.V. Balyakin, A.I. Khaimovich, L.A. Chempinsky, Simulating high-speed milling of BT-9 titanium alloy (Modelirovaniye rezhima vysokoskorostnogo frezerovaniya titanovogo splava VT-9), Bulletin of the RAS Samara Science Center, v. 6 (3), pp. 572–583 2013 [Google Scholar]
- A.V. Balyakin, V.G. Smelov, L.A. Chempinsky, Specialist training by use of CAD/CAM systems and interactive training labs (Specialist training by use of CAD/CAM systems and interactive training labs), Russian Aircraft Industry. Problems and Prospects (Samoletostroyeniye Rossii. Problemy i perspektivy): Proceedings of the International Symposium, Samara: SSAU, pp. 56–57 2012 [Google Scholar]
- A.I. Nigurey, I.V. Makarov, A.N. Zhidyayev, Specifics of building virtual kinematic models of five-axial machines (Osobennosti sozdaniya virtualnykh kinematicheskikh modeley pyatikoordinatnykh stankov), Bulletin of the RAS Samara Science Center, v. 19 (1), pp. 269–273 2017 [Google Scholar]
- I.V. Makarov, A.N. Zhidyayev, A.I. Nigurey, Use of virtual machines for machining simulation (Primeneniye virtualnykh stankov dlya modelirovaniya protsessov mekhanicheskoy obrabotki), International Scientific and Technical Conference on the Problems and Prospects of Engine Construction (Problemy i perspektivy razvitiya dvigatelestroyeniya), Samara: Samara University, v. 2 pp. 209–210 2016 [Google Scholar]
- D.L. Skuratov, A.N. Zhidyaev, M.B. Sazonov, Solid carbide end mills tool life increase in titanium alloys machining by design development and rational choice of geometrical parameters, Research Journal of Applied Sciences, v. 9 (11), pp. 767–770 2014 [Google Scholar]
- A.I. Ryazanov ,A.N. Shvetsov, Virtual debugging of a control program for a numerically controlled five-coordinate milling machine, Russian Engineering Research, v. 36 (8), pp. 677–680 2016 [CrossRef] [Google Scholar]
- A.V. Balyakin, V.G. Smelov, R.A. Vdovin, Ye.M. Dobryshkina, Cost-effectiveness analysis of using computer technology in pre-production (Analiz ekonomicheskoy effektivnosti ispolzovaniya kompyuternykh tekhnology pri tekhnologicheskoy podgotovke proizvodstva), International Scientific and Technical Conference on the Problems and Prospects of Engine Construction (Problemy i perspektivy razvitiya dvigatelestroyeniya), Samara: Samara University, v. 2 pp. 203–204 2016 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.