| Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
|---|---|---|
| Article Number | 05018 | |
| Number of page(s) | 4 | |
| Section | Agricultural Engineering | |
| DOI | https://doi.org/10.1051/matecconf/201822405018 | |
| Published online | 30 October 2018 | |
Using the imitation model of elementary technological operation at the evaluation of the threshing action of the threshing device
Don State Technical University, Gagarin square 1, Rostov-on-Don, 344000, Russia
* Corresponding author: fis62@mail.ru
The threshing process consists of a number of elementary technological operations, the duration of each of which proceeds during a time of 0.002-0.004 s. surrounded by one bar. In this article we present the calculation of the parameters of the threshing zone using the law of compression. A model of an elementary technological operation has been developed that makes it possible to determine probability of threshing, Calculate the parameters of the working elements of the output zone of the underdrum space of the threshing apparatus of a combine harvester.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.