Open Access
| Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
|---|---|---|
| Article Number | 01011 | |
| Number of page(s) | 6 | |
| Section | Manufacturing Technologies, Tools and Equipment | |
| DOI | https://doi.org/10.1051/matecconf/201822401011 | |
| Published online | 30 October 2018 | |
- I. Kirkpatrick, High definition plasma-an alternative to laser technology, Aircraft Engineering and Aerospace Technology, v. 70, iss. 3, pp. 215–217 (1998) [CrossRef] [Google Scholar]
- Kh.M. Rakhimyanov, A.I. Zhuravlev, A.A. Loktionov, A.Kh. Rakhimyanov, Modelirovanie processov tonkostrujnoj plazmennoj rezki dlya obespecheniya tochnosti formirovaniya krivolinejnyh konturov [Modeling of processes of high-precision plasma cutting for ensuring accuracy of formation of curvilinear contours], Nauchnyj vestnik Novosibirskogo gosudarstvennogo tekhnicheskogo universiteta – Science bulletin of NSTU, no. 4 (37), pp. 123–134 (2009), (in Russian) [Google Scholar]
- Kh.M. Rakhimyanov, A.A. Loktionov, Analiz pogreshnostej formoobrazovaniya pri tonkostrujnoj plazmennoj rezke metallicheskih materialov [Analysis of errors in forming trickle plasma cutting metal materials], Sbornik trudov Vserossiiskoi nauchno-prakticheskoi konferentsii “Sovremennye problem v tekhnologii mashinostroeniia”, posvyashchennoi 100-letiiu so dnia rozhdeniia professora Mukhanova I.I. – Proceedings of the International Scientific and Practical Conference “Modern Problems in Mechanical Engineering Technology”, dedicated to the 100th anniversary of the birth of professor Mukhanov I.I., Novosibirsk, pp. 151–153 (2009), (in Russian) [Google Scholar]
- Kh.M. Rakhimyanov, A.A. Loktionov, Tochnost’ formoobrazovaniya pri tonkostrujnoj plazmennoj rezke metallicheskih materialov i puti ee povysheniya [Shaping accuracy at high-precision plasma cutting of metal materials and the way of her increase], Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) – Metal Working and Material Science, no. 4 (45), pp. 31–32 (2009), (in Russian) [Google Scholar]
- Kh.M. Rakhimyanov, N.P. Gaar, A.Kh. Rakhimyanov, A.A. Loktionov, Estimation of accuracy in forming construction steels by the hifocus technology of high-precision plasma cutting, 11 International forum on strategic technology (IFOST 2016): proc., Novosibirsk, 1-3 June 2016. – Novosibirsk: NSTU, Pt. 1, pp. 66–68 (2016) [CrossRef] [Google Scholar]
- A.Kh. Rakhimyanov, Vybor tekhnologicheskikh skhem i optimizatsiya rezhimov tonkostruinoi plazmennoi rezki konstruktsionnykh stalei [Selection of technological schemes and high-precision plasma cutting mode optimization for structural steels], Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) – Metal Working and Material Science, no. 2 (63), pp. 46–55 (2014), (in Russian) [Google Scholar]
- A.Kh. Rakhimyanov, Kh.M. Rakhimyanov, B.A. Krasil’nicov, Tekhnologicheskie osobennosti raskroya bimetallicheskogo soedineniya “stal’ St3 + stal’ 12X18H10T” pri tonkostruinoi plazmennoi rezke [Technological features cutting bimetallic connections «steel St3 + steel 12H18N10T» by high-precision plasma cutting], Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) – Metal Working and Material Science, no. 3 (64), pp. 51–67 (2014), (in Russian) [Google Scholar]
- Kh. Rakhmyanov, A. Rakhmyanov, M. Heifetz, High-precision plasma cutting of the steel – aluminum bimetallic composition, Applied Mechanics and Materials, v. 788, pp. 41–45 (2015) [CrossRef] [Google Scholar]
- Kh. Rakhmyanov, A. Rakhmyanov, A. Zhuravlev, Advantages of high-precision plasma cutting for processing bimetallic compositions, Applied Mechanics and Materials, v. 698, pp. 294–298 (2015) [CrossRef] [Google Scholar]
- Kh.M. Rakhimyanov, A.Kh. Rakhimyanov, A.N. Smirnov, Osobennosti formirovaniya kanala reza pri tonkostrujnoj plazmennoj rezke bimetallicheskih kompozicij, vypolnennyh iz raznorodnyh materialov [Features of channel cut formation during high-precision plasma cutting of bimetallic compositions made from promiscuous materials], Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) – Metal Working and Material Science, no. 1 (70), pp. 22–30 (2016), (in Russian) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.