| Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
|---|---|---|
| Article Number | 01010 | |
| Number of page(s) | 6 | |
| Section | Manufacturing Technologies, Tools and Equipment | |
| DOI | https://doi.org/10.1051/matecconf/201822401010 | |
| Published online | 30 October 2018 | |
Perspectives of the industrial recycling of hard-alloy materials waste by electro-erosive grinding
Novosibirsk State Technical University, Faculty of Mechanical Engineering and Technologies, 630073 Prospekt K. Marx 20, Novosibirsk, Russia
* Corresponding author: kharis51@mail.ru
The creation of efficient industries is possible by using sustainable technologies based on the processes of recycling of the production waste. First of all, it refers to expensive material waste, including hard alloys. The electro-erosive grinding is considered to be the effective method of recycling such materials. The results of research on recycling the tungsten-cobalt hard alloy show the possibility of obtaining tungsten-carbide powders possessing improved physical and mechanical properties. The technology mentioned is also perspective for recycling tungstenless hard-alloy waste both at the laboratory devices equipped with the RC-generator and at the industrial installations of bulky grinding. It is established experimentally that the electro-erosive grinding of the TN20 tungstenless hard alloy at the laboratory provides obtaining the main volume (up to 85%) of the powder particles of the spherical shape having a dimension of 5 µm and the specific surface of 31.5 m2/g. Higher physical and mechanical properties of powders are also provided during recycling the TN20 alloy waste at the industrial installations of bulky grinding.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.