| Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
|---|---|---|
| Article Number | 04024 | |
| Number of page(s) | 7 | |
| Section | Modelling of Technical Systems. CAD/CAM/CAE Systems | |
| DOI | https://doi.org/10.1051/matecconf/201822404024 | |
| Published online | 30 October 2018 | |
Profiles of critical states in diagnostics of controlled processes
1
FRC CSC RAS, 119333, Moscow, Russian Federation
2
Sevastopol State University, 299053 Sevastopol, Russian Federation
* Corresponding author: duboviksa@gmail.com
The forecasting problem of critical states of controlled processes is considered. The large deviations of controlled process from some regular state is the basis of forecasting. The main tool for the analysis of large deviations and prediction of critical states is asymptotic methods. The forecasting problem is reduced to the Lagrange-Pontryagin optimal control problem that in some conditions has a unique solution in the form of quasipotential. Based on quasipotential it is possible to build an effective prediction of critical states of controlled process.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.