Open Access
Issue
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
Article Number 01012
Number of page(s) 6
Section Manufacturing Technologies, Tools and Equipment
DOI https://doi.org/10.1051/matecconf/201822401012
Published online 30 October 2018
  1. Yu.N. Goykhenberg, V.E. Roschin, S.I. II,in, Osobennosti kristallizatsii i formirovaniya magnitnykh svoystv amorfnykh splavov pri nagreve (Peculiarities of Crystallization and Formation of Magnetic Properties of Amorphous Alloys in Heating), Bulletin of the South Ural State University. Ser. Metallurgy, v. 16, pp. 134–142 (2016) (in Russian). DOI: 10/14529/met160320 [CrossRef] [Google Scholar]
  2. Yu.N. Goykhenberg, V.E. Roschin, S.I. IIyin, Struktura i magnitnyye svoystva amorfnykh splavov v zavisimosti ot stepeni kristallizatsii (Structure and magnetic properties of amorphous alloys as a function of degree of crystallinity), Bulletin of the South Ural State University. Ser. Metallurgy, v. 16(14), pp. 24–28 (2011) (in Russian). [Google Scholar]
  3. K.Kh. Rakhimyanov, N.P. Gaar, A.S. Eremina, Magnitnye kharakteristiki izdeliy, vypolnennykh iz nanokristallicheskikh i amorfnykh splavov (Magnetic characteristics of products made from nanocrystalline and amorphous alloys), Obrabotka metallov (tecknologiya, oborudovanie, instrumenty) = Metal Working and Material Science, v. 2(51), pp. 8–10 (2011) (in Russian). [Google Scholar]
  4. K.Kh. Rakhimyanov, Vliyaniye temperatury otzhiga na strukturu i tverdost’ amorfnykh i nanokristallicheskikh splavov (Influence of annealing temperature on structure and hardness of the amorphous and nanocrystalline alloys), Obrabotka metallov (tecknologiya, oborudovanie, instrumenty) = Metal Working and Material Science, v. 2(35), pp. 14–17 (2007) (in Russian). [Google Scholar]
  5. Kh.M. Rakhimyanov, B.A. Krasilnikov, K.Kh. Rakhimyanov, Tochnost’ formoobrazovaniya pri elektroalmaznoy prorezke pazov v amorfnykh i nanokristallicheskikh splavakh (The shaping accuracy during the electro-diamond cutting of slots in the amorphous and nanocrystalline alloys), Obrabotka metallov (tecknologiya, oborudovanie, instrumenty) = Metal Working and Material Science, v. 2(31), pp. 32–33 (2006) (in Russian). [Google Scholar]
  6. Kh.M. Rakhimyanov, B.A. Krasilnikov, K.Kh. Rakhimyanov, A.S. Eremina, Modernizatsiya oborudovaniya dlya elektroalmaznogo shlifovaniya izdeliy iz amorfnykh i nanokristallicheskikh splavov (Modernization of equipment for electrodiamond grinding of products of amorphous and nanocrystalline alloys), Obrabotka metallov (tecknologiya, oborudovanie, instrumenty) = Metal Working and Material Science, v. 3(56), pp. 37–39 (2012) (in Russian). [Google Scholar]
  7. Kh.M. Rakhimyanov, S.I. Vasilevskaya, Osobennosti formoobrazovaniya malykh otverstiy v medi pri elektrokhimicheskoy obrabotke v vodnykh khloridnykh rastvorakh (Features of small holes formation in copper by electrochemical machining in water chloride solutions), Obrabotka metallov (tecknologiya, oborudovanie, instrumenty) = Metal Working and Material Science, v. 2(75), pp. 6–16 (2017) (in Russian). DOI: 10.17212/1994-6309-2017-2-6-16 [CrossRef] [Google Scholar]
  8. Kh.M. Rakhimyanov, S.I. Vasilevskaya, Tekhnologicheskiye vozmozhnosti elektrokhimicheskoy obrabotki otverstiy nepodvizhnym katodom-instrumentom (Technological capabilities of the holes electrochemical machining using fixed cathode-tool), Obrabotka metallov (tecknologiya, oborudovanie, instrumenty) = Metal Working and Material Science, v. 2(71), pp. 12–20 (2016) (in Russian). DOI: 10.17212/1994-6309-2016-2-12-20 [Google Scholar]
  9. Kh.M. Rakhimyanov, A.I. Zhuravlev, N.P. Gaar, Ustanovka dlya issledovaniya elektrokhimicheskikh protsessov v usloviyakh lazernoy aktivatsii protsessa elektrokhimicheskoy razmernoy obrabotki (Installation for electrochemical processes investigation when laser activation of electrochemical dimensional processing occurs), Nauchnyy vestnik NGTU = Science bulletin of NSTU, v. 2(39), pp. 135–144 (2010) (in Russian). [Google Scholar]
  10. Kh.M. Rakhimyanov, S.I. Vasilevskaya, Vybor elektrolitov dlya elektrokhimicheskoy obrabotki otverstiy malogo diametra v medi (Electrolyte choice for electro-chemical treatment of small diameter holes in copper), Naukoyemkiye tekhnologii v mashinostroyenii = Science Intensive Technologies in Mechanical Engineering, v. 4(70), pp. 17–24 (2017) (in Russian). [CrossRef] [Google Scholar]
  11. Suzuki K., Fujimori H., Hashimoto K, Amorfnyye metally (Amorphous metals) (Metallurgiya, Moscow, 1987) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.