MATEC Web Conf.
Volume 224, 2018International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|Number of page(s)||6|
|Section||Manufacturing Technologies, Tools and Equipment|
|Published online||30 October 2018|
Comprehensive ensuring of quality of surfaces of details at centrifugal-planetary volume processing
FGBOU VO “Penza State University”, Penza, Russian Federation
* Corresponding author: email@example.com
The results of the system analysis of the set of input factors of the volumetric centrifugal-planetary processing, allowing to implement a comprehensive approach to the provision of quality processing parameters, are considered. A sequence of modeling processes ensuring the quality of surfaces during bulk processing is given. The results of modeling the contact of an abrasive working body with the surface of a workpiece with a microrelief are shown. The factors determining the stability of reliable achievement of qualitative indicators are noted. A dependence has been developed to determine the parameter of the surface roughness to be reduced, based on the results of modeling the contact between the surfaces of the working fluid and the workpiece by the finite element method. The experience of designing volumetric centrifugal processing operations on the basis of modeling is generalized. Methodical methods of technological preparation of manufacture for volumetric processing are offered.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.