MATEC Web Conf.
Volume 224, 2018International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|Number of page(s)||7|
|Section||Manufacturing Technologies, Tools and Equipment|
|Published online||30 October 2018|
Influence of the conditions of selective laser melting on evaporation
Moscow State University of Technology “STANKIN”, 127055, Vadkovskii per. 1, Moscow, Russia
* Corresponding author: email@example.com
The paper presents the results of optical diagnostics of evaporation and displacement of powder fractions during the formation of a single track in the process of selective laser melting. The velocity of the powder fractions is estimated. It was defined, that an increase in the scanning speed leads to an decrease in the particle coming out rate from the molten pool and the rate at which they are attracted. The results allow evaluating the kinetics of the mass-transfer process during selective laser melting. It was clearly shown the material quality properties after the selective laser melting are strongly influenced by the formed thermal field in the laser-irradiated zone.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.