| Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
|---|---|---|
| Article Number | 01007 | |
| Number of page(s) | 5 | |
| Section | Manufacturing Technologies, Tools and Equipment | |
| DOI | https://doi.org/10.1051/matecconf/201822401007 | |
| Published online | 30 October 2018 | |
Improving the cutting tool durability by applying multi-layer coatings
1
Novosibirsk State Technical University, 630073 Prospekt K. Marks 20, Novosibirsk, Russia.
2
Novosibirsk State Pedagogical University. 630126 Vilyuyskaya 28, Novosibirsk, Russia.
* Corresponding author: vereshhagina@corp.nstu.ru
The interrelation between the stress values in the cutting tool and the working efficiency of the instrument materials, particularly the durability period is considered. The possibility of applying the cutting force as a parameter for assessing the efficiency of using one or another hard-alloy tool, including the choice of the optimal coating is shown. It appears possible because the cutting force, on the whole, reflects the value and the distribution of stress. The graphical illustration of the results obtained is presented.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.