MATEC Web Conf.
Volume 224, 2018International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|Number of page(s)||5|
|Section||Modelling of Technical Systems. CAD/CAM/CAE Systems|
|Published online||30 October 2018|
The rolls calibration development and caliber drawings preparation with the computer software for the bent profiles production and straight-through pipes formation for laser welding
Immanuel Kant Baltic Federal University, 14 Nevskogo str., 236041 Kaliningrad, Russia
2 National University of Science and Technology “MISIS”, 4 Leninsky Ave., 119049 Moscow, Russia
* Corresponding author: LSavina@kantiana.ru
A computer program has been created for selecting the profiling route, calculating the rolls for the manufacture of bent symmetrical and asymmetric profiles of virtually any real configurations with the issuance of a complete set of drawings. The algorithm of the program is based on the mathematical model of the strip profiling process, which allows geometric and energy-strength parameters calculation. To create an algorithm for designing roll calibrations to produce curved profiles, a unified description of the shape of the profile was proposed. The left and right halves of the cross section of the profile are treated as separate sets of alternating straight sections and rounds. The configuration of each of them for one and the other profile half is entered separately, starting from the middle. For each point of conjugation (the beginning and end of the section), the coordinates, the rounding radius and the rotation angle are specified (or calculated in the future). The accepted profile shape description makes it possible to compile a general algorithm for calculating the roll calibrations of virtually any profiles, and not to develop an algorithm for each profile or group of profiles.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.