MATEC Web Conf.
Volume 224, 2018International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|Number of page(s)||6|
|Section||Manufacturing Technologies, Tools and Equipment|
|Published online||30 October 2018|
Contact ability optimization of the surface of titanium parts with different stiffness during flat grinding by highly porous wheel
Irkutsk Nation Research Technical University, Department of Technology and Equipment of Machinery Production, 664074, Irkutsk, Russian Federation
* Corresponding author: email@example.com
In order to improve the contact performance properties, we present optimization of flat grinding of titanium parts in accordance with two parameters: the relative bearing length of the profile and the relative bearing part of the parts’ surface that allow to assess the quality of the surface at the micro- and macro-scale. It is established that in order to achieve the set goal, grinding should be carried out with a minimum lateral feed rate sΠ = 2.0 mm/double pass, and the remaining technological parameters are selected depending on the rigidity of the parts and the direction of its variation.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.