Open Access
| Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
|---|---|---|
| Article Number | 01081 | |
| Number of page(s) | 6 | |
| Section | Manufacturing Technologies, Tools and Equipment | |
| DOI | https://doi.org/10.1051/matecconf/201822401081 | |
| Published online | 30 October 2018 | |
- B.Ya. Mokritskiy, Controlling the Efficiency of Tools by Means of Coating Application, (Upravleniye rabotosposobnostyu instrumenta pri nanesenii pokryty), STIN, 11, 11–15, (2010) [Google Scholar]
- M.A. Volosova, V.D. Gurin, Influence of vacuum-plasma nitride coatings on contact processes and a mechanism of wear of working surfaces of high-speed steel cutting tool at interrupted cutting, Journal of Friction and Wear, 34 (3), 183–189, (2013) [Google Scholar]
- M. E. Maximov, Durable Coatings and Their Application to Improve the Performance of Cutters, (Iznosostoykiye pokrytiya i ikh primeneniye v povyshenii ekspluatatsionnykh kharakteristik rezhushchego instrumenta), Bulletin of the Moscow State Technical University MAMI, 4 (22), Vol. 2, 27–34, (2014) [Google Scholar]
- V.N. Gadalov, V.G. Salnikov, D.N. Romanenko, I.V. Shirin, Durable Coatings for Cutters, (Iznosostoykiye pokrytiya dlya rezhushchego instrumenta), Mechanical Engineering Technology, (Tekhnologiya mashinostroyeniya), 7, 26–28, (2011) [Google Scholar]
- A.S. Vereshchaka, A.A. Vereshchaka, A.I. Bulycheva, Multi-layer Nanodispersive Coatings for Cutters, (Mnogosloynye nanodispersnye pokrytiya dlya rezhushchego instrumenta), Strengthening Technologies and Coatings, (Uprochnyayushchiye tekhnologii i pokrytiya), 5, 33–39, (2014) [Google Scholar]
- Y.G. Kabaldin, S.V. Seryi, S.N. Murav’ev, A.A. Prosolovich, E.V. Simagina, Improving cutter performance by the application of nanostructural coatings, Russian Engineering Research, 30 (3), 235–242, (2010) [CrossRef] [Google Scholar]
- V.P. Tabakov, A.V. Chikhranov, Multicomponent nitride coatings for improving tool performance, Russian Engineering Research, 29 (10), 1047–1053, (2009) [CrossRef] [Google Scholar]
- I.V. Blinkov, O.A. Volkhonskii, V.N. Anikin et al, Nanostructured wear-resistant coatings based on multicomponent nitrides and produced by vacuum-arc ion-plasma deposition, Protection of Metals and Physical Chemistry of Surfaces, 48 (6), 649–655, (2012) [CrossRef] [Google Scholar]
- V.P. Tabakov, A.V. Chikhranov, Selecting the composition of wear-resistant coatings, Russian Engineering Research, 38 (2), 105–109, (2018) [CrossRef] [Google Scholar]
- V.P. Tabakov, A.V. Chikhranov, Wear-Resistant Coatings of Cutting Tolls Operated in Continuous Cutting (Iznosostoikie pokrytiya rezhushchego instrumenta, rabotayushchego v usloviyakh nepreryvnogo rezaniya) (Ulyanovsk: Ulyanovsk Gos. Tekh. Univ., 2007) [Google Scholar]
- S.S. Gorelik, L.N. Rastorguyev, Yu.A. Skakov, X-ray Structure and Electron-Optical Analysis of Metals, (Rentgenostrukturny i elektronnooptichesky analiz metallov), Metallurgizdat, (1970) [Google Scholar]
- V.P. Tabakov, A.V. Chihranov, Determining the Mechanical Properties of Durable Ion Plasma Coatings Based on TiN, (Opredeleniye mekhanicheskikh kharakteristik iznosostoykikh ionno-plazmennykh pokryty na osnove nitrida titana), Bulletin of Samara RAS Research Center, 12 (4), 292–297, (2010) [Google Scholar]
- A.D. Makarov, Optimization of cutting processes (Optimizatsiya protsessov rezaniya) (Moscow: Mashinostroenie, 1976) [Google Scholar]
- A.N. Reznikov Thermophysics of processes of mechanical processing of metals (Teplofizika protsessov mekhanicheskoy obrabotki metallov) (Moscow: Mashinostroenie, 1981) [Google Scholar]
- A.O. Volkhonskii, I.V. Blinkov, A.A. Vereshchaka, A.S. Vereshchaka, A.D. Batako, Filtered cathodic vacuum ARC deposition of nano-layered composite coatings for machining hard-to-cut materials, The International Journal of Advanced Manufacturing Technolog, 5-8 (84), 1647–1660, (2016) [Google Scholar]
- A.S. Vereshchaka, Efficiency of Cutters with Durable Coatings, (Rabotosposobnost rezhushchego instrumenta s iznosostoykimi pokrytiyami), Mashinostroyeniye, (1993) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.