| Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
|---|---|---|
| Article Number | 03012 | |
| Number of page(s) | 6 | |
| Section | Materials science | |
| DOI | https://doi.org/10.1051/matecconf/201822403012 | |
| Published online | 30 October 2018 | |
The use of nanomodified heat storage materials for thermal stabilization in the engineering and aerospace industry as a solution for economy
1
Tambov State Technical University, 392000, Tambov, Russia
2
Peoples Friendship University of Russia, 117198, Moscow, Russian
* Corresponding author: Energynano@yandex.ru
The paper presents studies on the use of nanomodified materials with phase transitions. The rmostable heat exchange devices based on materials modified with carbon nanotubes allowing to control thermal contact have been developed. It is established that through a controlled thermal contact it is possible to provide a heat flux of up to 100 [kW·m-2 ]. The application of heat-resistance storage material in technical devices such as self-rescuers is justified. The efficiency of thermal control is established, since the temperature after the heat exchanger is reduced to 40 ° C at an incoming temperature of about 100 °C.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.