| Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
|---|---|---|
| Article Number | 01082 | |
| Number of page(s) | 6 | |
| Section | Manufacturing Technologies, Tools and Equipment | |
| DOI | https://doi.org/10.1051/matecconf/201822401082 | |
| Published online | 30 October 2018 | |
Use of additive technologies to increase effectiveness of design and use of a vacuum gripping devices for flexible containers
VSTU, Russia, 400005, Volgograd, pr. Lenina, 28
* Corresponding author: amm34@mail.ru
In an effort to increase efficiency of the process of handling of an air-penetrating flexible container during its’ filling with free-flowing materials a devise has been designed for automatic gripping, opening, holding and sealing of flexible container, containing vacuum gripping devise, pneumatic drive for its’ transfer and a control system based on programmable logical controller. Vacuum gripping device can be produced using the method of additive technologies. It has a modular structure, while each module contains random or structured vacuum chambers located on work surface area, connected to a system of internally branched channels with the source of vacuum. Large number of small vacuum chambers in place allows to minimize leakage of air though pores and openings on the surface of the mouth of weaved flexible container, which increases reliability of holding and reduces energy consumption during the process of handling air-penetrating packaging during its’ filling.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.