EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 224 (2018) MATEC Web Conf., 224 (2018) 01031 References
Open Access
Issue
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
Article Number 01031
Number of page(s) 7
Section Manufacturing Technologies, Tools and Equipment
DOI https://doi.org/10.1051/matecconf/201822401031
Published online 30 October 2018
  1. Rodney Boyer GW., Materials properties handbook: titanium alloys. Materials Park, OH: ASM International; (1994) [Google Scholar]
  2. H.L. Freese, M.G. Volas, J.R., Wood Metallurgy and technological properties of titanium and titanium alloysD.M. Brunette, P. Tengvall, M. Textor, P. Thomsen (Eds.), Titanium in Medicine: Material Science, Surface Science, Engineering, Biological Responses and Medical Applications, Springer Berlin Heidelberg, New York pp. 25–52 (2001) [Google Scholar]
  3. R.A. Vdovin, V.G. Smelov, M.A. Bolotov, N.D. Pronichev, Paths of Improving the Technological Process of Manufacture of GTE Turbine Blades, IOP Conference Series: Materials Science and Engineering, (2016) [Google Scholar]
  4. R.A. Vdovin, V.G. Smelov, Design and optimization of the micro-engine turbine rotor manufacturing using the rapid prototyping technology, IOP Conference Series: Materials Science and Engineering, (2017) [Google Scholar]
  5. A.V. Agapovichev, A.V. Sotov, V.V. Kokareva etc. Investigation of the effect of laser radiation parameters on the structure and mechanical properties of parts obtained bv the SLM technology from // III Russian scientific seminar with international participation “Interdisciplinary Problems in Additive Technologies”. p. 7–8 (2017) [Google Scholar]
  6. Seung MiBaek Alexander V. PolyakovJi Hyun MoonIrina P. SemenovaRuslan Z. ValievHyoung SeopKim, Effect of surface etching on the tensile behavior of coarse- and ultrafine-grained pure titanium. Materials Science and Engineering: A, Vol. 707, Pages 337–343 (2017) [CrossRef] [Google Scholar]
  7. A.A. Golubeva, A.V. Sotov, A.V. Agapovichev et al., Research of the possibility of using an electrical discharge machining metal powder in selective laser melting, IOP Conference Series: Materials Science and Engineering, (2017) [Google Scholar]
  8. A.V. Balaykin, E.A. Nosova, N.V. Galkina, Study of the Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy grain structure uniformity after bending and annealing, IOP Conference Series: Materials Science and Engineering, (2017) [Google Scholar]
  9. S.B.F. Lamolle, M.M.M. Rubert, H.J. Haugen, S.P. Lyngstadaas, J.E. Ellingsen, The effect of hydrofluoric acid treatment of titanium surface on nanostructural and chemical changes and the growth of MC3T3-E1 cells Biomaterials, pp. 736–742 (2009) [Google Scholar]
  10. A.V. Balaykin, E.A. Nosova, N.V. Galkina, Research of Residual Stress after Deformation and Annealing of a Titanium Alloy Ti-5Al-5Mo-5V-1Cr-1Fe Billets // IOP Conference Series: Materials Science and Engineering, Vol. 142. Issue 1. (2016). [Google Scholar]
  11. C. Grosskreutz, D.K. Benson, The effects of the surface on the mechanical properties of metals J.J. Burke, N.L. Reed, V. Weiss (Eds.), Surface and Interfaces ΙΙ, Syracuse Univ. Press, New York pp. 61–94.C (1968). [Google Scholar]
  12. C. Cassinelli, M. Morra, G. Bruzzone, A. Carpi, Di Santi G, R. Giardino, et al., Surface chemistry effects of topographic modification of titanium dental implant surfaces: 2. In vitro experiments. Int J Oral Maxillofac Implants 18(1): 46–52 (2003) [Google Scholar]
  13. S.B.F. Lamolle, M.M.M. Rubert, H.J. Haugen, S.P. Lyngstadaas, J.E. Ellingsen, The effect of hydrofluoric acid treatment of titanium surface on nanostructural and chemical changes and the growth of MC3T3-E1 cells Biomaterials, pp. 736–742(2009) [Google Scholar]
  14. G.V. Smirnov, N.D. Pronichev, M.V. Nekhoroshev, V.I. Bogdanovich, Experimental and theoretical study of the hydriding behaviour in the pulse ecm of titanium alloys // IOP Conference Series: Materials Science and Engineering, Vol. 177. Issue 1. (2017) [Google Scholar]
  15. V.G. Smelov, A.V. Sotov, A.V. Agapovichev etc., Investigation of the structure and mechanical properties of the samples fabricated by selective laser melting of TI powder // International Seminar on Interdisciplinary Problems in Additive Technologies. P. 29 (2017) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.