Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
---|---|---|
Article Number | 01122 | |
Number of page(s) | 5 | |
Section | Manufacturing Technologies, Tools and Equipment | |
DOI | https://doi.org/10.1051/matecconf/201822401122 | |
Published online | 30 October 2018 |
Ensuring the quality of the machined holes during the hole truing and reaming on lathe machines
Crimean Engineering and Pedagogical University, Uchebniy side st.8, 295055 Simferopol, Russian Federation
* Corresponding author: alievaziz2704@gmail.com
The article is devoted to studying of the influence of cutting liquids, including those of plant origin, on the roughness of the treated surface during the reaming and deployment in details of titanium alloy, structural and corrosion-resistant steels. The relationships between the characteristics of the adhesive interaction of the tool and the processed materials and the length of the contact area of the tool with the workpiece and heat in the cutting zone are determined. The effectiveness of plant-origin cutting liquids is shown in comparison with conventional oils under conditions of the pronounced adhesive wear.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.