MATEC Web Conf.
Volume 224, 2018International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|Number of page(s)||6|
|Section||General problems of mechanical engineering: design, optimization, maintenance|
|Published online||30 October 2018|
Hydraulic technological machines with adaptive drive structure
Don state technical university (branch) In Shakhty Rostov region, Russia
2 Shakhty Polytechnic college, Shakhty, Rostov region, Russia
* Corresponding author: firstname.lastname@example.org
In a large group of technological machines, drive provides two interlocking working movements. In metalworking, the working process is provided by two movements of the cutting tool relative to the forms or details. As a rule, this is due to the rotational and forward movements. The ratio of speeds of these movements, the ratio of two movements, or the ratio of the brought capacities to each of these movements can be the significant indicators of working process, having the optimum value. The method of automatic maintenance of the ratio for a hydraulic actuator with two engines is considered in the article. Schematic diagrams of the drive for some technological machines are considered. Based on the example of the device intended for processing of curvilinear surfaces, the process of automatic control regulating thickness of hydraulic actuator having adaptive structure is described. The efficiency of self-regulation at rather simple circuitry decisions is shown.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.