| Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
|---|---|---|
| Article Number | 02103 | |
| Number of page(s) | 7 | |
| Section | General problems of mechanical engineering: design, optimization, maintenance | |
| DOI | https://doi.org/10.1051/matecconf/201822402103 | |
| Published online | 30 October 2018 | |
Analysis of methods of assessing the quality of protective paint car coatings
Don State Technical University, 344022 Sotsialisticheskaya 162, Russia
* Corresponding author: author@email.org
At present, modern ways to protect a varnish coating of cars have become widespread among motorists. Small particles of dirt, dust, winter reagents, minuses of car wash systems, a large number of stones on the road do not have the best effect on car cover. All operational impacts destroy the protective paintwork, after which the steel car body is no longer able to resist the effects of the environment. The body begins to rust and deteriorate. The car eventually loses its appearance, ceases to shine, becomes opaque. Reduction of adverse operational impacts on the paint coating of the car is achieved by modern methods of protection. A wide distribution in the market of automobile cosmetics was produced by protective polishes based on wax or synthetic constituents. It is connected with their small cost and ease of application. The flagship on auto market for the protection of car paint coating is armor plate. This is a protective transparent film with a thickness of approximately 100 microns, providing the maximum degree of protection. Thus, with the help of modern means of protecting paint coating, one can minimize the negative impact of the environment and prolong youth to a car.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.