Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
---|---|---|
Article Number | 02008 | |
Number of page(s) | 8 | |
Section | General problems of mechanical engineering: design, optimization, maintenance | |
DOI | https://doi.org/10.1051/matecconf/201822402008 | |
Published online | 30 October 2018 |
Method for constructing an equivalent mechanical model of an elastic system of a machine with various technological equipment
1
Vyatka State University, Kirov, Russian Federation
2
Orenburg State University, Orenburg, Russian Federation
* Corresponding author: sergei.vasiljevyh@yandex.ru
The article deals with the construction of an equivalent mechanical model of the elastic system of the machine for turning non-rigid shafts with various technological equipment, including machining in centers and machining in a chuck with the rear rotating center being clamped without using additional support and using a vibration-damper lunette. The relevance of this study due to the fact that in view of low stiffness processed non-rigid shaft technology system machine-tool-tool-workpiece is extremely sensitive to the deformations caused by the action of cutting forces. As a result, significant processing errors are generated. High sensitivity to deformations serves as a source of intensive vibrations of the workpiece, which leads to deterioration of the quality of the machined surface of the part, a decrease in the durability and durability of the cutting tool, accelerated wear and loss of guaranteed machine accuracy parameters. This makes it essential to significantly reduce the cutting conditions, to resort to multi-pass processing, which greatly increases the laboriousness and cost of manufacturing products. In this context, the aim of this study – the creation of an equivalent mechanical model of the machine, allowing the process of studies to determine the boundaries of sustainable non-rigid turning shafts considering the different ways of mounting the workpiece on the machine. The materials of the article can be useful for engineers and scientists in the field of engineering.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.