Issue |
MATEC Web Conf.
Volume 224, 2018
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|
|
---|---|---|
Article Number | 01054 | |
Number of page(s) | 6 | |
Section | Manufacturing Technologies, Tools and Equipment | |
DOI | https://doi.org/10.1051/matecconf/201822401054 | |
Published online | 30 October 2018 |
Control of the induction soldering on the basis of process temperature indirect measurements
Reshetnev Siberian State University of Science and Technology, Department of Information Control Systems, 31 Krasnoyarsky Rabochy Av., Krasnoyarsk, Russian Federation
* Corresponding author: vadimond@mail.ru
The article suggests the use of indirect measurements to control the process of induction soldering. Based on the equations of thermodynamics, it is proposed a scheme for approximating the temperature values in the solder zone on the basis of information from pyrometric sensors aimed at an area remote from the soldered joint site. A model-algorithmic instrument for indirect temperature measurements in the soldering technological process is developed, the scheme of which is presented in the article. The software of waveguide paths induction soldering control in the form of an already existing system module has been developed, which allows not only to carry out experimental studies on control algorithms, but also to implement a full-scale experiment, the results of which confirm the effectiveness of the proposed approach.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.