MATEC Web Conf.
Volume 224, 2018International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018)
|Number of page(s)||5|
|Section||General problems of mechanical engineering: design, optimization, maintenance|
|Published online||30 October 2018|
Improving the efficiency of the roller screen with circular disks
Tver State Technical University, Construction, Road Machinery and Equipment Department, 170026 Tver, emb. Afanasy Nikitin, 22, Russia
2 Tula State University, Hoisting and Conveying Machines and Equipment Department, 300012 Tula, Lenin Avenue, 92, Russia
3 Bryansk State Technical University, University administration, 241035 Central Federal District, Bryansk Region, Bryansk, 50 Years of October Boulevard, 7, Russia
* Corresponding author: email@example.com
The design, operation and technical characteristics of the roller screen test bench with movable aprons are described. The results of studies of gravel screening on a roller device with circular disks are presented. The rational parameters of the roller screen plate are obtained: the speed of the rollers with disks, working surface canting angle, the speed of the aprons. Comparative evaluation of the efficiency and productivity of the screening process at the devices with circular and multisided disks is given.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.