EDPS Account

Volume 95 (2017)

Free Access to the whole issue

MATEC Web of Conferences

Volume 95 (2017)

2016 the 3^rd International Conference on Mechatronics and Mechanical Engineering (ICMME 2016)

Shanghai, China, October 21-23, 2016
H.L. Yuan, R.K. Agarwal, P. Tandon and E.X. Wang (Eds.)

Export the citation of the selected articles Export
Select all

Open Access

About the conference

Published online: 09 February 2017

PDF (23.1 KB)

Open Access

Statement of Peer review

Published online: 09 February 2017

PDF (47.7 KB)

Materials Handling Methods and Performance Analysis

Open Access

Antimicrobial Property of Hydrocolloid Impression Material Incorporated with Silver Nanoparticles Against Staphylococcus Aureus 01001

Norbu Penden Wangchuk, Passiri Nisalak, Boonyanit Thaweboon, Sroisiri Thawboon and Pornrachanee Sawaengkit

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179501001

Open Access

Antifungal Activity of Type III Dental Gypsum Incorporated with 3-iodo-2- Propynyl-Butylcarbamate 01002

Thitinop Riyatanon, Pornrachanee Sawaengkit, Sroisiri Thaweboon, Boonyanit Thaweboon and Passiri Nisalak

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179501002

Open Access

Effect of Bond Layer Properties to Thermo-Mechanical Stresses in Flip Chip Packaging 01003

Y.W. Pok, D. Sujan, M.E. Rahman and S.S. Dol

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179501003

Open Access

Performance and Stability Analysis of Sub-stiffening for Mechanical Buckling and Post Buckling: A Selective Study 01004

Hemza Layachi and Yuan-ming Xu

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179501004

Open Access

The Effect of Growth Temperature and V/III Flux Ratio of MOCVD Antimony Based Semiconductors on Growth Rate and Surface Morphology 01005

Ari Handono Ramelan, Sayekti Wahyuningsih and Ewa Goldys

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179501005

Open Access

Effect of Different Photovoltaic Materials on Energetic and Exergetic Performance of Photovoltaic Thermal Arrays 01006

C.S. Rajoria, Pankaj Kumar Gupta, Sanjay Agrawal, G.N. Tiwari and D. Singh

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179501006

Open Access

The Application Research on Waste Clay Brick in the Cement Concrete 01007

Cheng-qin Chen, Yi-lin Zhang, Wei Zhang and Yu-chun Zhang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179501007

Open Access

The Pavement Performance Research on the Powder Colored Asphalt Mixture 01008

Cheng-qin Chen and Wei Zhang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179501008

Open Access

Investigation into Effects of Scanning Speed on in Vitro Biocompatibility of Selective Laser Melted 316L Stainless Steel Parts 01009

Yitong Shang, Yanping Yuan, Yongzhi Zhang, Dongfang Li and Yansheng Li

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179501009

Open Access

Dynamic Response Analysis of Elastic-plastic Structures with Component Mode Synthesis 01010

Peng-bo Qian

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179501010

Open Access

The Stress and Stiffness Analysis of Diaphragm 01011

Dongyue Qu, Xiuming Li, Fanbing Liu and Chunhua Zhao

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179501011

Material Structure and Measurement

Open Access

Influences of the Air in Metal Powder High Velocity Compaction 02001

Jun Liu, Haifeng Hu and Xiaolong Luo

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179502001

Open Access

Influence of Process Parameters in n-PMEDM of Inconel 800 with Electrode and Coated Electrodes 02002

K. Karunakaran and M. Chandrasekaran

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179502002

Open Access

Simulation and Experiment on In-plane Carbon Nanotube Thermoelectric Generator in Parallel 02003

Wenbin Huang, Xiangjun Song, Yaozhou Liu, Wanling Li, Peng Zhang and Xiaopan Liu

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179502003

Open Access

Finite Element Modeling with Embed Rebar Elements and Steady State Rolling Analysis for Rolling Resistance Test of Pneumatic Tire 02004

Chakrit Suvanjumrat and Ravivat Rugsaj

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179502004

Open Access

Ceramics Vitreous China Produced by Utilizing Sediment Soil from Water Supply Treatment Process 02005

Ubolrat Wangrakdiskul, Jindakarn Wanasbodee and Pornnapa Sansroi

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179502005

Open Access

A Surface Plasmon Resonance Histamine Sensor Based on an Electropolymerized Molecularly Imprinted Polymer (E-MIP) 02006

Frances Adeline D. Hubilla, Arvin I. Mabilangan, Rigoberto C. Advincula and Florian R. del Mundo

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179502006

Open Access

Micro-Bulges Investigation on Laser Modified Tool Steel Surface 02007

Fazliana Fauzun, Syarifah Nur Aqida, Izwan Ismail and Norhafzan Bariman

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179502007

Open Access

A Master Shape of Bottles for Design under Desirable Geometry and Top Load Test 02008

Piyapat Keawjaroen and Chakrit Suvanjumrat

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179502008

Open Access

Effect of machining parameters on surface finish of Inconel 718 in end milling 02009

Bapi Sarkar, Moola Mohan Reddy and Sujan Debnath

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179502009

Materials Science and Engineering

Open Access

Thermo-Physical Properties of Kenaf-Filled Acrylonitrile Butadiene Styrene Composites 03001

Siti Nikmatin, Achmad Syafiuddin, Naresworo Nugroho, Widya Utama and Agus Sukarto Wismogroho

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179503001

Open Access

Complex Power System for Lithium Batteries and Lead-Acid Batteries 03002

Hendrick, Chen-Chai Tsai, Jyun-Teng Jheng, Zhi-Hao Wang and Gwo-Jia Jong

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179503002

Open Access

A Prototype of Industrial Waste Water Treatment Using Electrocoagulation 03003

Phonnipha Boriboonsuksri and Natth Jun-krob

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179503003

Open Access

Mechanical Property of 9 Years Old Thinning of Teak Plantation in Thailand 03004

Somchai Seviset, Thanate Piromgran, Udomsak Saributr, Ratthai Porncharoen, Kananke Raerai and Sittichai Charoensettasilp

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179503004

Open Access

Stress Analysis of Non-Ferrous Metals Welds by Numerical Simulation 03005

Helena Kravarikova

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179503005

Open Access

Numerical Investigation of the Air Flow Effects on Amorphous Alloy Ribbon Formation 03006

Yongpeng Li, Cuiping Wang and Fengyin Wang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179503006

Open Access

Numerical Simulation Analysis of Seismic of Frame Structure on Hill Terrain 03007

Weisu Weng, Xupeng Zhao and Zhanxue Zhou

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179503007

Open Access

Effect of Geometrical Parameters on Deflection of Different Chassis Component Sections 03008

Sumedh Kousadikar, Mangesh Yadav, Dattaprasad Lomate and Manoj Ukhande

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179503008

Open Access

The Effect of Nano-Aluminumpowder on the Characteristic of RDX based Aluminized Explosives Underwater Close-Filed Explosion 03009

Yin Junting, Yuan Baohui, Zhou Tao, Li Gang and Ren Xinlian

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179503009

Open Access

Analysis of Dynamic Mechanical Properties for Simply Supported Beam Including ESP Glass 03010

Guoliang Zhang and Jishi Du

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179503010

Open Access

Thermal and Hydraulic Performances of Nanofluids Flow in Microchannel Heat Sink with Multiple Zigzag Flow Channels 03011

Weerapun Duangthongsuk

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179503011

Open Access

Seismic Response of Building Structure Near Tunnel 03012

Zhanxue Zhou and Hongliang Hu

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179503012

Open Access

Solar Wear Tattoo: New Technology Through the use of Different Material Behaviours 03013

Vanessa da Graça Mendes and Mario S. Ming Kong

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179503013

Mechanical Transmission Device and Design

Open Access

Prediction of Vortex-Induced Vibration of Bare Cylinder and Cylinder Fitted with Helical Strakes 04001

KeeQuen Lee, Aminudin Abu, Pauziah Muhamad, Asnizah Sahekhaini, Litken Tan and HooiSiang Kang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179504001

Open Access

A Method for Generating Helical Surface of the VPA Hob on a CNC Worm Grinding Machine 04002

Van-The Tran, Ruei-Hung Hsu, Shih-Sheng Chen and Yu-Ren Wu

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179504002

Open Access

Fracture Failure Analysis of Fuel Pump Transmission Shaft of Dual-Fuel Engine 04003

Pei-hong Chen, Jun-jie Zou and Li Fan

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179504003

Open Access

Concept Design of Movable Beam of Hydraulic Press 04004

Yancong Li, Shengmou Wan, Yule Liu and Xin Song

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179504004

Open Access

Study on Installation Angle of the Milling Wheel Accurate Estimation and Compensation 04005

Xuemei Zong, Qiang Guo, Kaixuan Kang, Haibo Jia and bing He

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179504005

Open Access

Synthesis of Two Four-bar in Series for Body Guidance 04006

Wen-Yeuan Chung

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179504006

Open Access

Research on Thermal-Mechanical Coupling Modeling and Simulation of the Spindle Feed System of Machine Tool 04007

Jianhua Xu, Wenhua Ye, Yang Feng and Chunyu Li

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179504007

Open Access

Stochastic Stability and Bifurcation of A High Speed Rotor-Bearing System with Random Excitation 04008

Jiarong Lu, Jiangang Zhang, Wenju Du and Hongwei Luo

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179504008

Open Access

Design of Gear Churning Power Loss Measurement Device 04009

Bin Wang, Ya Jie Zhou and Ping Wang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179504009

Mechanical Processing Technology

Open Access

Surface polish of PLA parts in FDM using dichloromethane vapour 05001

Yifan Jin, Yi Wan and Zhanqiang Liu

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179505001

Open Access

Laser Welding Process Parameters Optimization Using Variable-Fidelity Metamodel and NSGA-II 05002

Chaochao Wang, Qi Zhou, Ping Jiang, Leshi Shu and Xiongbin Li

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179505002

Open Access

Rapid Modelling and Grinding of Workpieces’ Inner-surface by Robot with Impedance Model Based Fuzzy Force Control Algorithm 05003

Fei Wang, Zhong Luo and Hongyi Liu

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179505003

Open Access

Improvement of EDM Machining Speed by Using Magnetic/Piezoelectric Hybrid Drive Actuator 05004

Xiaoyou Zhang and Kouki Uchiyama

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179505004

Open Access

The Tool Path Planning for Ring Torus Optical Surface Diamond Turning with Parallel 2DOF Fast Tool Servo 05005

Aiyun Hao and Sixiang Zhang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179505005

Open Access

Tool Wear Analysis due to Machining In Super Austenitic Stainless Steel 05006

Ashwin Polishetty, Mohanad Alabdullah and Guy Littlefair

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179505006

Open Access

Development of Inner-Grooved Tubes by Dieless Micro-Forming with Laser-as-Sisted Air Pressure 05007

Ching-Min Cheng, Ming-Zheng Tu, Tun-Ping Teng, Shang-Pang Yu, Cheng-Yi Yu and Yu-Tai Chang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179505007

Open Access

An Analytical and Experimental Investigation of Average Laser Power and Angular Scanning Speed Effects on Laser Tube Bending Process 05008

Khalil Ibraheem Imhan, B.T.H.T. Baharudin, Azmi Zakaria, Mohd Idris Shah b. Ismail, Nasser Mahdi Hadi Alsabti and Ahmad Kamal Ahmad

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179505008

Power Mechanical Engineering

Open Access

Research on Mass Imbalance Fault of Wind Turbine Based on Virtual Prototype 06001

Ping Zhao, Xiaoguang Li and Liu Yang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179506001

Open Access

Five Types of Ruled Helical Surfaces for Helical Conveyers, Support Anchors and Screws 06002

S. N. Krivoshapko and Marina Rynkovskaya

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179506002

Open Access

Effect of Injection Location and Multi-Hole Nozzle on Mixing Performance in a CNG-Fuelled Engine with Port Gas Injection, Using CFD Analyses 06003

Tianbo Wang and Siqin Chang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179506003

Open Access

Design and Pitch Angle Optimisation of Horizontal Axis Hydrokinetic Turbine with Constant Tip Speed Ratio 06004

Suyash Nigam, Shubham Bansal, Tanmay Nema, Vansh Sharma and Raj Kumar Singh

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179506004

Open Access

Design of Radial Inflow Turbine for 30 kW Microturbine 06005

Thanate Sangsawangmatum and Udomkiat Nontakaew

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179506005

Open Access

Implementation of Multi-Body Dynamics Simulation for the Conveyor Chain Drive System 06006

Chakrit Suvanjumrat, Wasan Suwannahong and Sommart Thongkom

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179506006

Open Access

Analysis of Roller Chain Drive System with Multi-Flexible Body Dynamics Methodology 06007

Wasan Suwannahong and Chakrit Suvanjumrat

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179506007

Open Access

Optical Display of Transverse Jet Flow Field Under Supersonic Inflow 06008

Qian Li, Ji-fei Ye and Dian-kai Wang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179506008

Open Access

Transient Analysis of Air/Oil Two-Phase Flow in Bearing Chamber under the Periodic Boundary Conditions 06009

Wang Fei, Guoding Chen, Yang Fu and Wang Tao

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179506009

Open Access

The Characteristic of Thermoelastic Waves in Transversely Isotropic Finite Cylinders 06010

Hao Bai

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179506010

Mechanical Design-Manufacture and Automation

Open Access

Random Fatigue Analysis of Drill-Strings in Frequency Domain 07001

JiaHao Zheng, Jianming Yang and Ping Yang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507001

Open Access

Dynamic Characteristics Analysis of a Micro Grinding Machine Tool 07002

Wei Li, Beizhi Li and Jianguo Yang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507002

Open Access

Research on the development of the centrifugal spinning 07003

Zhiming Zhang and Jun Sun

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507003

Open Access

Correlations between Axial and Oblique Loaded Column 07004

Salwani Mohd Salleh, Barkawi Sahari, Aidy Ali, Mas Ayu Hassan and Rosdi Daud

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507004

Open Access

An Experimental Investigation of Cutting Temperature and Tool Wear in 2 Dimensional Ultrasonic Vibrations Assisted Micro-Milling 07005

Mohd Rasidi Ibrahim, Zulafif Rahim, Erween Rahim, Latif Tobi, Kai Cheng and Hui Ding

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507005

Open Access

Differential Quadrature Method Based Study of Vibrational Behaviour of Inclined Edge Cracked Beams 07006

Shivani Srivastava and Raju Sethuraman

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507006

Open Access

Three-Dimensional Assembly Tolerance Analysis Based on the Jacobian-Torsor Statistical Model 07007

Heping Peng and Wenlong Lu

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507007

Open Access

Research on Optimization of Formula SAE Truss-Frame 07008

Yu Wang, Jianwei Liu, Yuhan Li and Nianjiong Yang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507008

Open Access

Application Research for Performance of Refrigeration Units with Flash Tank Economizer 07009

Huanghui Qin and Li Fan

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507009

Open Access

A Hybrid Prediction Method of Thermal Extension Error for Boring Machine Based on PCA and LS-SVM 07010

Qiang Cheng, Yanwei Yu, Guangpeng Li, Weishuo Li, Bingwei Sun and Ligang Cai

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507010

Open Access

A Method to Optimize Geometric Errors of Machine Tool based on SNR Quality Loss Function and Correlation Analysis 07011

Ligang Cai, Jiaying Li, Qiang Cheng, Bingwei Sun and Yan Wang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507011

Open Access

Research on the Frequency Aliasing of Resistance Acceleration Guidance for Reentry Flight 07012

Pengxin Han, Jiangtao Xu, Shang Li and Zixiang Yan

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507012

Open Access

Design and Testing of a 2-DOF Flexure-based Compliant Stage 07013

Yunsong Du, Tiemin Li, Wei Ji and Yao Jiang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507013

Open Access

Wire Rupture Optimization in Wire Electrical Discharge Machining using Taguchi Approach 07014

Ibrahem Maher, Ahmed A.D. Sarhan and Houriyeh Marashi

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507014

Open Access

Simulation of the Carton Erection for the Rubber Glove Packing Machine Using Finite Element Method 07015

Kawin Jewsuwun and Chakrit Suvanjumrat

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507015

Open Access

Acoustic Emission Technique Applied in Textiles Mechanical Characterization 07016

Carlos Rolando Rios-Soberanis, Jose Rodriguez-Laviada, Emilio Perez-Pacheco, Takenobu Sakai and Shuichi Wakayama

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507016

Open Access

Design and Analysis of an Abbé Free Coplanar Stage 07017

Tien-Tung Chung, Teng-Hui Tseng and Ching-Siong Lim Chan

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507017

Open Access

Determination of the Number of Fixture Locating Points for Sheet Metal By Grey Model 07018

Bo Yang, Zhongqi Wang, Yuan Yang, Zewang Jing and Yonggang Kang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507018

Open Access

The Effect of Orifice Diameter to the Acoustic Signals Captured at the Cold Part of a Ranque-Hilsch Vortex Tube 07019

Wirachman Wisnoe, Khairil Muhaimin Abd Rahman, Yusman Istihat and Valliyappan David Natarajan

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507019

Open Access

Topological Optimization of Continuum Structure based on ANSYS 07020

Xue-ping Li, Lian-yu Zhao and Zheng-zhong Liu

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507020

Open Access

Research on Winding System of Twisting Machine Based on Multi-parameters 07021

Zhiming Zhang, Jun Sun and Xiaoqing Wu

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507021

Open Access

Calibration of an Indexing Table Using a High Precision Angle Comparator 07022

Ming Huang, PinKuan Liu, Yangqiu Xia, Qiu Hu, Mengyang Li and Qiang Tang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507022

Open Access

Submersible Unmanned Aerial Vehicle: Configuration Design and Analysis Based on Computational Fluid Dynamics 07023

Qinyang Wang, Songping Wu, Weijiang Hong, Wenzheng Zhuang and Yihao Wei

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507023

Open Access

Reactive Ion Etching Process of Micro Mechanical Pendulum 07024

Wei Zhang, Xiaoyan Duan, Jin Qiao and Ping Yue

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507024

Open Access

Evaluate of Chill Vent Performance for High Pressure Die-Casting Production and Simulation of Motorcycle Fuel Caps 07025

Piyanut Meethum and Chakrit Suvanjumrat

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507025

Open Access

Experimental Studies of Composite Sandwich Columns with Face/Core Debond under Axial Compression 07026

Yue Chen, Xi Zhu, Zi-xu Zhu and hua-dong Li

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507026

Open Access

The Vibration Impact Determination of the Helicopter Structural Components 07027

Zeinab Khaksar, Sreenatha Anavatti, Krishna Shankar, Alessandro Ceruti and Heath Pratt

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507027

Open Access

Empirical Model and Validation of Bar Formation in Sand Bed Channel 07028

Duratul Ain Tholibon, Junaidah Ariffin, Jazuri Abdullah, Ainamardia Nazarudin, Nur` Ain Mat Yusof and Dulina Tholibon

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179507028

Robot Design and Control

Open Access

Economic Floating Waste Detectionfor Surface Cleaning Robots 08001

Jakkrit Sumroengrit and Niramon Ruangpayoongsak

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179508001

Open Access

ADAMS-MATLAB Co-Simulation of A Serial Manipulator 08002

Tejaswin Parthasarathy, Vignesh Srinivasaragavan and Soundarapandian Santhanakrishnan

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179508002

Open Access

Research on the Obstacle Negotiation Strategy for the Heavy-duty Six-legged Robot based on Force Control 08003

Mantian Li, Enbo Cong, Pengfei Wang and Wei Guo

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179508003

Open Access

Implementation of a Mobile Robot Platform Navigating in Dynamic Environment 08004

Hadjira Belaidi, Hamid Bentarzi and Mohamed Belaidi

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179508004

Open Access

Implementation of a map route analysis robot: combining an Android smart device and differential-drive robotic platform 08005

Chi-Hung Tseng, Ching-Chang Wong and Wen-Hsuan Kuan

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179508005

Open Access

Mobile Robot Positioning by using Low-Cost Visual Tracking System 08006

Niramon Ruangpayoongsak

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179508006

Open Access

Dimension Synthesis of a Spatial Parallel Kinematic Manipulator Based on S-shaped Test Specimen 08007

Yuzhe Liu, Jun Wu, Liping Wang and Jinsong Wang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179508007

Open Access

Two Error Models for Calibrating SCARA Robots based on the MDH Model 08008

Xiaolong Li, Hong Hu and Wenhua Ding

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179508008

Open Access

Type Synthesis of Parallel 2R1T Remote Center of Motion Mechanisms Based on Screw Theory 08009

Long Huang, Chenhan Guang, Yang Yang and Peng Su

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179508009

Open Access

The Effect of Foot Structure on Locomotion of a Small Biped Robot 08010

Tinh Nguyen, Linh Tao and Hiroshi Hasegawa

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179508010

Open Access

The Motion Path Study of Measuring Robot Based on Variable Universe Fuzzy Control 08011

Guoqing Ma, Zhenglin Yu, Guohua Cao, Ruoyan Zhang and Yanbin Zheng

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179508011

Open Access

Reduced Attitude Control of a Robotic Underwater Vehicle 08012

Lukáš Bláha

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179508012

Open Access

Dynamic Obstacle Detection Based on Background Compensation in Robot’s Movement Space 08013

Tao Ni, Qidong Li, Le Sun and Lingtao Huang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179508013

Open Access

Optimal Design for PID Controller Based on DE Algorithm in Omnidirectional Mobile Robot 08014

Peizhang Wu, Kai Wang, Juzhong Zhang and Qi Zhang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179508014

Open Access

Real Time FPGA-Based Ethernet Control Communication for Robotic Arm 08015

Mohamad Khairi Ishak, Ho Kar Hwai and Lee Kong Lam

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179508015

Vehicle Structure Design and Manufacturing

Open Access

Control Strategy for Automatic Transmission under the Condition of Rough Road Feature Recognition 09001

Yulong Lei, Qingkai Wei, Xingzhong Li, Xuesong Zheng and Yao Fu

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179509001

Open Access

Design and test of urea hydrolysis reactor for vehicle 09002

Zhanfeng Qi, Shusen Li and Xiuli Guo

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179509002

Open Access

Simulating Study on Drive System Performance for Hybrid Electric Bus Based on ADVISOR 09003

Xingxing Wang, Hongjun Ni, Yu Zhu, Shuaishuai Lv, Mingyu Huang and Zheng Zhang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179509003

Open Access

Design of a Maglev Vibration Test Platform for the Research of Maglev Vehicle-girder Coupled Vibration Problem 09004

Danfeng Zhou, Lianchun Wang, Jie Li and Peichang Yu

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179509004

Open Access

Design and Analysis of the AlNiCo Hybrid Magnet in EMS Maglev Vehicles 09005

Chao Lv and Jie Li

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179509005

Open Access

Formation keeping of unmanned ground vehicles 09006

Kamonwan Muangmin and Thanapat Wanichanon

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179509006

Open Access

Design, Modeling and Virtual Validation of Mobility platform of Tracked Vehicle 09007

Syed Talat Shabbir and Chen Hui-yan

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179509007

Open Access

Innovative Design and Manufacture of “S” Type Carbon-Free Cars 09008

Jianwei Liu, Yuhan Li and Nianjiong Yang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179509008

Manufacturing and Industrial Production

Open Access

Genetic Algorithm Combined with Gradient Information for Flexible Job-shop Scheduling Problem with Different Varieties and Small Batches 10001

Ming Chen and Jie-Lin Li

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179510001

Open Access

Research on Management System of Mold Manufacturing Enterprise Based on RFID Technology 10002

Bin Wang, Defang Liu and Mingkun Ji

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179510002

Open Access

Redesigning of Shopping Cart for Cost Reduction Using DFMA 10003

C. D. Naiju, Pranav. V. Warrier and V. Jayakrishnan

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179510003

Open Access

Development of a Low Cost MQL Setup for Turning Operations 10004

Sumaiya Islam, Noman Khandoker, Mohamad Izham, Tengku Azizi and Sujan Debnath

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179510004

Open Access

3D-Printed Linear Positioner with Micrometer Accuracy 10005

Yin-Yen Kuo, Chiao-Hua Cheng and Shao-Kang Hung

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179510005

Open Access

Effect of Parameters of Isopipe on the Quality of Glass Sheet Produced from Overflow Fusion Process by Numerical Simulation 10006

Yansheng Hou, Jinshu Cheng, Junfeng Kang, Jingjing Cui, Xinjian Xue and Dong Zuo

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179510006

Open Access

Factors that Influenced the Quality Inspection on the Production Line in Manufacturing Industry 10007

Yunos Ngadiman, Burairah Hussin, Abdul Talib Bon and Nor Aziati Abdul Hamid

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179510007

Open Access

The Design of Drawing Process of Cylindrical Cup with Oval Bottom Using Computer Simulation 10008

Mária Kapustová and Róbert Sobota

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179510008

Open Access

Applying Triz for Production Quality Improvement 10009

Nikalus Shu Luing Swee, Guat Guan Toh, Mum Wai Yip, Chee Sheng Keong and See Chew Tai

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179510009

Ship and Traffic Engineering

Open Access

Research on Stiffness of the Hull Beam Model Based on ADAMS 11001

Yanshi He, Fangzhen Song and Haiyan Shao

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179511001

Open Access

Research on Goods and the Ship Interaction Based on ADAMS 11002

Fangzhen Song, Yanshi He and Haining Liu

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179511002

Open Access

Fuzzy Classification and Implementation Methods for Tugboat Main Engine Fault 11003

Xiaohui Xu and Guangchen Bai

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179511003

Open Access

Comprehensive Detection Technology for Urban Subway 11004

Jinghui Xia, Tao Liao and Lixun Zhang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179511004

Open Access

Considering Ergonomics in the Planning of Tugger Train Systems for Production Supply 11005

Christopher Keuntje, Michael Kelterborn and Willibald A. Günthner

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179511005

Open Access

Study on Braking Sensation Based on Urban Working Conditions 11006

Lanie Abi, Tianji Feng, Mingyue Zhou and Jiajun Chen

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179511006

Applied Mechanics and Dynamics

Open Access

Compatibility Conditions in Continua with Microstrusture 12001

Evgenii V. Murashkin and Nikita E. Stadnik

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179512001

Open Access

Mechanical Design of AM Fabricated Prismatic Rods under Torsion 12002

Alexander V. Manzhirov

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179512002

Open Access

Impact of Village Resistance Values on Simulating Results of Flood Routing in Floodplains 12003

Fengde Zhang and Xiaolei Zhang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179512003

Open Access

Multiscale Modeling for Mechanical Properties of Cancellous Bone Based on the Schwarz Surface 12004

ZhiQiang Huang, Yufeng Nie, Zihao Yang, YiQiang Li and NiuPing Guo

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179512004

Open Access

A Comparative Study on Turbulence Models for Simulation of Flow Past NACA 0015 Airfoil Using OpenFOAM 12005

Peerakit Kekina and Chakrit Suvanjumrat

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179512005

Open Access

Computational Modeling of Dynamic Stability Derivatives for Generic Airfoils 12006

Muhammad Saleem Mumtaz, Adnan Maqsood and Salma Sherbaz

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179512006

Open Access

Analysis of Thin Walled Wavy Shell of Monge Type Surface with Parabola and Sinusoid Curves by Variational-Difference Method 12007

Vyacheslav Ivanov and Marina Rynkovskaya

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179512007

Open Access

Study on Accuracy of Gough P.S and Guo Stress Formula in Calculating Propellant Bed Stress under Quasi-static Compaction 12008

Yu-ling Zhang, Guo-qing Liu, Jin-ming Li and Guo-dong Wang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179512008

Open Access

FE Simulation of the Stress-Strain State during Shear-Compression Testing and Asymmetric Three-Roll Rolling Process 12009

Alexander Pesin, Denis Pustovoytov, Veniamin Kharitonov and Aleksey Korchunov

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179512009

Open Access

The Level Set Topological Optimization Method based on the Constraints of Volume and Stress 12010

Dongyue Qu, Fanbing Liu, Xiuming Li and Chunhua Zhao

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179512010

Open Access

Entrance Region Flow Heat Transfer in Concentric Annuli with Rotating Inner Wall for Herschel-Bulkley Fluids 12011

Srinivasa Rao Nadiminti and A. Kandasamy

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179512011

Open Access

The Thermohydrodynamic Analysis of Sliding Bearing High-Speed Motorized Spindle by Rotor Dynamic 12012

Songsheng Li, Yuan Shen and Yuxin Lu

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179512012

Mechatronics

Open Access

Bearings Fault Diagnosis Based on Convolutional Neural Networks with 2-D Representation of Vibration Signals as Input 13001

Wei Zhang, Gaoliang Peng and Chuanhao Li

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179513001

Open Access

Adaptive Control Algorithm of the Synchronous Generator 13002

Victor Shevchenko, Viacheslav Pshikhopov and Mikhail Medvedev

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179513002

Open Access

Analytical Calculation and Analysis of Main Generator Inductance of Aero Brushless Three-stage Synchronous Starter/Generator System 13003

Jixiang Wang, Weiguo Liu and Zan Zhang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179513003

Open Access

Co-simulation for the Power Generation Characteristics of an Electromagnetic Linear Actuator used in Active Suspensions 13004

Anqi Peng, Yan Shi and Wenchao Yue

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179513004

Open Access

Comparative Study between Two Schemes of Active-Control-Based Mechatronic Inerter 13005

Lingduo He, Yaozong Liu and Silu Han

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179513005

Open Access

Error Compensation on Probe Parameters of Articulated Arm CMM 13006

Dateng Zheng, Gang Zhao, Zhongyue Xiao, Zhiyang Luo, Taiping Zhou and Jing Zhang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179513006

Electronic Technology and Application

Open Access

Temperature Insensitive Current-Mode Four Quadrant Multiplier Using Single CFCTA 14001

Sunti Tuntrakool, Peerawut Suwanjan and Winai Jaikla

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179514001

Open Access

Universal Filter Using Single Commercially Available IC: LT1228 14002

Surapong Siripongdee and Winai Jaikla

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179514002

Open Access

Multifunction Voltage-Mode Filter Using Single Voltage Differencing Differential Difference Amplifier 14003

Amornchai Chaichana, Surasak Sangyaem and Winai Jaikla

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179514003

Open Access

Analysis of the Functionality of the Transformer Ripple Filter for High-power DC Supplies 14004

Lokvenc Jaroslav, Drtina Rene and Sedivy Josef

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179514004

Open Access

Frequency Domain Analysis for An Adaptive Windowing Parabolic Sliding Mode Filter 14005

Shanhai Jin, Xiaodan Wang, Yonggao Jin and Xiaogang Xiong

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179514005

Open Access

Multiple Iteration of Weight Updates for Least Mean Square Adaptive Filter in Active Noise Control Application 14006

Rahimie Mustafa, Anuar Mikdad Muad, Shahrizal Jelani and Ahmad Nur Alifa Abdul Razap

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179514006

Open Access

Condition Evaluation of Storage Equipment Based on Improved D-S Evidence Theory 14007

Xiao-yu Zhang and Hua-feng He

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179514007

Open Access

An Electrochemical DNA Sensor for p53 Tumor Suppressor Gene Detection 14008

Jie Zhang, Long Wan, Hao Fan and Fusheng Liao

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179514008

Open Access

Method for Detection of the Lean Meat Ratio in Pork Carcass Based on Fiber Optic Sensor 14009

Zhichao Sun, Sheng Leng, Wantai Ma, Qing Xu and Xiaoming Xie

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179514009

Open Access

Indoor Nearby Channel Condition Estimation System 14010

Jia-Chyi Wu and Teng-Fu Huang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179514010

Open Access

Circuit Model of Curved Ultra Wideband (UWB) Antenna 14011

Lee Chia Ping

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179514011

Power System and Electrical Engineering

Open Access

A Bidding Model for a Virtual Power Plant via Robust Optimization Approach 15001

Tianxiang Geng, Li Xiang, Maosheng Ding and Feng Li

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179515001

Open Access

Comparative analysis of FACTS devices based on the comprehensive evaluation index system 15002

Jiankun Liu, Jing Chen and Zhen Qian

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179515002

Open Access

Optimal Allocation of Generalized Power Sources in Distribution Network Based on Multi-Objective Particle Swarm Optimization Algorithm 15003

Ran Li, Jingwei Yuan, Yundong Song, Yingxuan Yang and Tao Meng

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179515003

Open Access

Multi-Objective Low-Carbon Economic Dispatch Considering Demand Response with Wind Power Integrated Systems 15004

Wenjuan Liu, Yundong Song, Junru Zhang, Yang Liu and Tao Meng

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179515004

Open Access

Analysis of the Thermal Load of Structural Elements High-Power DC Supply with the Transformer of Ripple Filter with Current Overload 15005

Lokvenc Jaroslav, Drtina Rene and Sedivy Josef

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179515005

Open Access

Analysis on Crack Fatigue Growth Calculation for Nuclear Power Plant In-service Inspection 15006

Cheng Yang, Xueliang Zhang and Peng Xia

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179515006

Open Access

Simulation Analysis for Opening Performance of Medium Voltage Vacuum Circuit Breaker Based on ADAMS and Maxwell 15007

Xianliang Ding, Zhiming Wang, Qinlin Yin, Pengwei Chen, Shijin Zhou and Yang Yang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179515007

Open Access

Prospects for the Use of Additional Cooling System for the Oil-Immersed Transformers with Thermoelectric Transducers 15008

Andrey V. Dmitriev, Oksana S. Dmitrieva and Ilnur N. Madyshev

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179515008

Open Access

Electromagnetic Exhaust Valve Event Optimization for Enhancing Gasoline Engine Performance 15009

Xinyu Fan and Siqin Chang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179515009

Open Access

Simulation of YBCO Tape and Coils in HTS Maglev System 15010

Mengxiao Song and Jie Li

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179515010

Open Access

Magnetic Flux Density Feedback Control for Permanent Magnetic-Electromagnetic Hybrid Suspension System 15011

Qiang Chen, Jie Li, Guanchun Li and Siyang Zhou

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179515011

Control Theory and Technology

Open Access

A Hybrid Controller for Position Control of a Pneumatic Actuator under Variable Loading Conditions 16001

Sukhdeep Singh Dhami

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179516001

Open Access

Analytical Formulations in the Domain Decomposition Method using Cylindrical Control Surface 16002

Bo Tian and Hui-long Ren

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179516002

Open Access

Research and Application of an Automatic Clam Collecting Device 16003

Bin Wang, Kaijie Hu and Ping Wang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179516003

Civil and Architectural Engineering

Open Access

Structural Reliability Analysis Using Orthogonalizable Power Polynomial Basis Vector 17001

Yejun Li and Bin Huang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179517001

Open Access

Study on the Thermal Environment and Indoor Comfort of Half Glass Curtain Buildings – a Case of Kouhu Visitor Center in Yunlin County, Taiwan 17002

Ta-Ching Liang and Szu-Hsien Peng

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179517002

Open Access

Study for the Pile Foundation on Steep Slope Applied in UHV Transmission projects 17003

Jin Li and He Chuan

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179517003

Open Access

Study on the Influence of Piloti Ratio on Residential Block’s Wind Environment by Coupled Simulation Method 17004

Tianyu Xi, Jianhua Ding and Hong Jini

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179517004

Open Access

The maximum sloshing wave height evaluation in cylindrical metallic tanks by numerical means 17005

Walid Samir Manser, Mokhtar Touati and Rui Carneiro Barros

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179517005

Open Access

Carved Monge Surfaces as New Forms in the Architecture 17006

Jevgenija Filipova and Marina Rynkovskaya

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179517006

Open Access

Presenting a Model Based on Fuzzy Application to Optimize the Time of IBS Projects in Gas Refineries 17007

Abbas Naderpour, Javad Majrouhi Sardroud and Masood Mofid

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179517007

Open Access

Application Status and Trends of Bolting-Shotcreting-Mesh Supporting Technology in Underground Engineering and Its Application in Ivory Coast 17008

Kouame Joseph Arthur Kouame, Fuxing Jiang, Yu Feng and Sitao Zhu

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179517008

Open Access

A Study on Landslide Risk Management by Applying Fault Tree Logics 17009

Danish Kazmi, Sadaf Qasim, I.S.H Harahap, Syed Baharom, Arjumend Masood and Muhammad Imran

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179517009

Environment and Energy

Open Access

The Strengthening of Geological Infrastructure, Research and Data Acquisition - Using Gis in Ivory Coast Gold Mines 18001

Kouame Joseph Arthur Kouame, Fuxing Jiang, Yu Feng and Sitao Zhu

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179518001

Open Access

Performance of Grass Filter Strip in Copper and Zinc Removal in Surface and Subsurface Runoff 18002

Weijie Huo, Huaidong Zhou, Linghua Liu, Gaofeng Zhao, Zhaohui Yang and Yilei Yu

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179518002

Open Access

Stochastic Lot-Sizing under Carbon Emission Control for Profit Optimisation in MTO Manufacturing 18003

A. Qiao, S.H. Choi, X.J. Wang and Y.C. Zhao

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179518003

Open Access

Estimating Household Willingness to Pay for Improved Solid Waste Management: A Case Study of Thu Dau Mot City, Binh Duong 18004

Pham Thi Thuy Trang, Dinh Quang Toan and Nguyen Thị Xuan Hanh

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179518004

Open Access

Analysis of the changing Solar Radiation Angle on Hainan Island 18005

Zhiwu Ge, JingJing Huang, Hongxia Li and Huizhen Wang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179518005

Open Access

An Experimental Study on the Inner and Outer Glass Cover Temperatures of Solar Still 18006

Pankaj K. srivastava, Ashutosh Dwivedi, Mihir Kumar Pandey, Abhay Agrawal and R.S. Rana

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179518006

Open Access

Experiment on Measurement of Interfacial Tension for Subsurface Conditions of Light Oil from Thailand 18007

Jiramet Jiravivitpanya, Kreangkrai Maneeintr and Thitisak Boonpramote

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179518007

Information Theory and Technology

Open Access

Prediction of Shanghai Index based on Additive Legendre Neural Network 19001

Bin Yang and Haifeng Wang

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179519001

Open Access

An Improved Brain Storm Optimization with Dynamic Clustering Strategy 19002

Zijian Cao, Xiaofeng Rong and Zhiqiang Du

Published online: 09 February 2017

DOI: https://doi.org/10.1051/matecconf/20179519002