Open Access
Issue
MATEC Web Conf.
Volume 95, 2017
2016 the 3rd International Conference on Mechatronics and Mechanical Engineering (ICMME 2016)
Article Number 01002
Number of page(s) 4
Section Materials Handling Methods and Performance Analysis
DOI https://doi.org/10.1051/matecconf/20179501002
Published online 09 February 2017
  1. F. Cappitelli, P. Principi, R. Pedrazzani, L. Toniolo, C. Sorlini, Sci. Total. Environ. 385, 172–81, (2007). [CrossRef]
  2. J. Lstiburek, T. Brennan, N. Yost, 1–2, (2002).
  3. W.J. Fisk, E.A. Eliseeva, M.J. Mendell, Environ. Health. 9, 72, (2010). [CrossRef]
  4. W.J. Fisk, Q. Lei-Gomez, M.J. Mendell, Indoor. Air. 17, 284–96, (2007). [CrossRef]
  5. S. Gallão, A.C. Pizzolitto, L. Santos-Pinto, A. dos Santos-Pinto, K. Faltin Jr, MartinsL.P., J. World. Fed. Orthod. 2, e165–e168, (2013). [CrossRef]
  6. M.A. Ghannoum, R.J. Jurevic, P.K. Mukherjee, F. Cui, M. Sikaroodi, A. Naqvi, P.M. Gillevet, PLoS. Pathog. 6, e1000713, (2010). [CrossRef] [PubMed]
  7. A.A.H. Khan, S.M. Karuppayil, Saudi. J. Biol. Sci. 19, 405–426, (2012). [CrossRef]
  8. D. Norback, G.H. Cai, J. Environ. Monit. 13, 2895–903, (2011). [CrossRef]
  9. K. Malachova, P. Praus, Z. Rybkova, O. Kozak, Appl. Clay. Sci. 53, 642–645 (2011). [CrossRef]
  10. S. Saengmee-Anupharb, T. Srikhirin, B. Thaweboon, S. Thaweboon, T. Amornsakchai, S. Dechkunakorn, T. Suddhasthira, Asian. Pac. J. Trop. Biomed. 3, 47–52, (2013). [CrossRef]
  11. C.A. Clausen, V.W. Yang, Int. Biodeter. Biodegr. 55, 99–102, (2005). [CrossRef]
  12. S. Thaweboon, B. Thaweboon, S. Plang-Ngern, P. Nisalak, R. Kaypetch, Adv. Mater. Res. 898, 292–295, (2014). [CrossRef]
  13. S. Badreshia, MarksJ.G., Jr., Am. J. Contact. Dermat. 13, 77–9, (2002).
  14. US EPA Archive Document of 3-Iodo-2-propynyl butylcarbamate (IPBC), 1–6, (1997).
  15. S. Thaweboon, P. Nisalak, B. Thaweboon, P. Sawaengkit, S. Plang-Ngern, R. Kaypetch, Adv. Mater. Res. 1052, 322–326, (2014). [CrossRef]
  16. CLSI M38-A standard for moulds, The University of Adelaide, http://www.adelaide.edu.au.
  17. ASTM Designation: G 21–90 Standard Practice for Determining. Resistance of Synthetic Polymeric Materials to Fungi, 1097–1100, (1990).
  18. ASTM G21-96, Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi, ASTM International, West Conshohocken, PA, http://www.astm.org/, (1996).
  19. H. Egusa, T. Watamoto, K. Abe, M. Kobayashi, Y. Kaneda, S. Ashida, T. Matsumoto, H. Yatani, Int. J. Prosthodont. 21, 62–8, (2008).
  20. K.L. Garg, K.K. Jain, and A.K. Mishra. Sci. Total Environ. 167, 255–271, (1995). [CrossRef]
  21. Canadian environmental quality guidelines (1999).
  22. G. Selvaggi, S. Monstrey, K. Van Landuyt, M. Hamdi, P. Blondeel, Acta. Chir. Belg. 103, 241–247, (2003). [CrossRef]
  23. L. Reinprecht, Fungicides for Wood Protection - World Viewpoint and Evaluation/Testing in Slovakia, InTech, Croatia, 95–122, (2010).
  24. R.S. Lanigan, IJT. 17, 1–37, (1998).
  25. Information technique - technical datasheet : Sirius, France.
  26. K.F. Nielsen, G. Holm, L.P. Uttrup, P.A. Nielsen, Int. Biodeter. & Biodegr. 54, 325–336, (2004). [CrossRef]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.