MATEC Web Conf.
Volume 95, 20172016 the 3rd International Conference on Mechatronics and Mechanical Engineering (ICMME 2016)
|Number of page(s)||5|
|Section||Mechanical Transmission Device and Design|
|Published online||09 February 2017|
Study on Installation Angle of the Milling Wheel Accurate Estimation and Compensation
1 Jiangsu Xuzhou Construction Machinery Research Institute, Xuzhou 221004, Jiangsu, China
2 School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo, 454000, China
An accurate estimation and compensation algorithm is proposed to calculate the manufacture deviation of the milling wheel based on optical measurement. Firstly, the spatial position of the cutting tool tip and the installation angle of the cutting tool are calculated based on measured data from hand held coordinate measuring instrument. Secondly, the installation angle field between the measurement model and CAD modelis calculated and analyzed by statistics methods. Thirdly, the deviation compensation strategy is given to correct the manufacturing process base on the results of the analysis. The feasibility of the proposed method has been validated by an illustrated experiment at last. The comparison results show that the deviation of the installation angle can be effectively constrained and the proposed method is helpful for the improvement of quality and accuracy in milling wheel.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.