MATEC Web of Conferences

Open Access

Correlative analysis of shoe insoles acting in moist and cold/warm environment 01001

Barbu Braun and Mihaela Baritz

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179401001

• Abstract
• PDF (5.174 MB)
• References

Open Access

FEM modelling of shoes insoles components for standing and walking simulation 01002

Barbu Braun and Mihaela Baritz

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179401002

• Abstract
• PDF (1.895 MB)
• References

Open Access

Design of equipment for training machine tools 01003

Miroslav Císar, Nadežda Čuboňová and Ivan Kuric

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179401003

• Abstract
• PDF (1.847 MB)
• References

Open Access

Designing parts for a robust behaviour against vibrations. A new concept 01004

Florin Corciovă and Mircea Viorel Drăgoi

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179401004

• Abstract
• PDF (1.985 MB)
• References

Open Access

Finite-element analysis of some pneumatically-actuated wrist-rehabilitation equipment 01005

Ovidiu Filip and Tudor Deaconescu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179401005

• Abstract
• PDF (1.647 MB)
• References

Open Access

Mathematical modelling of a Fin Ray type mechanism, used in the case of the wrist rehabilitation equipment 01006

Ovidiu Filip and Tudor Deaconescu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179401006

• Abstract
• PDF (305.6 KB)
• References

Open Access

Application of the method based on technological knowledge and expertise for adding the design of a technological process 01007

Piotr Ociepka

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179401007

• Abstract
• PDF (626.9 KB)
• References

Open Access

Graphic interface for numerical commands on the USB port of PC compatible computers 01008

Elena Popa and Viorel Popa

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179401008

• Abstract
• PDF (1.109 MB)
• References

Open Access

Dynamic analysis of scraper conveyor operation with external loads 01009

Jerzy Świder, Krzysztof Herbuś and Kamil Szewerda

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179401009

• Abstract
• PDF (668.1 KB)
• References

Open Access

Analysis of impact of longitudinal inclination of a chain conveyor on dynamical phenomena during operation 01010

Kamil Szewerda, Jerzy Świder and Krzysztof Herbuś

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179401010

• Abstract
• PDF (2.053 MB)
• References

Open Access

Engineering applications using CAD based application programming interface 01011

Anastasios Tzotzis, Cesar Garcia-Hernandez, Jose-Luis Huertas-Talon, Dimitrios Tzetzis and Panagiotis Kyratsis

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179401011

• Abstract
• PDF (1.340 MB)
• References

Open Access

Research regarding reverse engineering for aircraft components 01012

Razvan Udroiu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179401012

• Abstract
• PDF (2.370 MB)
• References

Open Access

Studies regarding the processing of small thickness containers 01013

Mihaela Urdea

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179401013

• Abstract
• PDF (1.495 MB)
• References

Open Access

Analysis of bearings behaviour with cylindrical rollers with variable center of gravity 02001

Sorin Barabas and Adriana Florescu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179402001

• Abstract
• PDF (585.8 KB)
• References

Open Access

CADOProSys Software. Logistics 02002

Cătălin-Iulian Chivu, Catrina Chivu and Cristina Găvruş

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179402002

• Abstract
• PDF (813.1 KB)
• References

Open Access

CADOProSys Software. General structure 02003

Catrina Chivu, Cătălin-Iulian Chivu and Magdalena Barbu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179402003

• Abstract
• PDF (582.1 KB)
• References

Open Access

Innovative analysis of HS 6-5-2 drills edges quality 02004

Raluca Daicu and Valentin Diţu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179402004

• Abstract
• PDF (3.735 MB)
• References

Open Access

Researches on evaluation of smooth entrance in cutting using electrical current. A case study 02005

Valentin Diţu, Gheorghe Oancea and Raluca Daicu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179402005

• Abstract
• PDF (1.973 MB)
• References

Open Access

Influence of friction stir process parameters on surface quality of aluminum alloy A2017 02006

Cecile Langlade, Adriana Roman, Daniel Schlegel, Eric Gete, Patrice Noel and Milena Folea

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179402006

• Abstract
• PDF (1.980 MB)
• References

Open Access

Characteristics of geometric structure of the surface after grinding 02007

Stanislaw Legutko, Krzysztof Zak and Jan Kudlacek

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179402007

• Abstract
• PDF (1.544 MB)
• References

Open Access

Tool life of ceramic wedges during precise turning of tungsten 02008

Stanislaw Legutko, Piotr Winiarski, Tadeusz Chwalczuk, Ludmila Marcincinova-Novakova and Krzysztof Zak

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179402008

• Abstract
• PDF (703.8 KB)
• References

Open Access

Experimental research about positioning correction of CNC machine with X-axis up to 12000 millimeters using laser measurement equipment 02009

Ştefan Adrian Moldovan, Marius Cosma and Vasile Năsui

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179402009

• Abstract
• PDF (2.336 MB)
• References

Open Access

Modelling of the aluminium alloy machining process 02010

Piotr Paszta

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179402010

• Abstract
• PDF (2.110 MB)
• References

Open Access

Analyses of process parameters influence on the drilling process by using carbide drills for steel St52-3 02011

Ioan Alexandru Popan, Alina Ioana Popan, Sorin Cosmin Cosma and Alexandru Carean

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179402011

• Abstract
• PDF (3.084 MB)
• References

Open Access

Influence of explosive welding parameters on properties of bimetal Ti-carbon steel 02012

Mariusz Prazmowski, Michał Najwer, Henryk Paul and Dariusz Andrzejewski

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179402012

• Abstract
• PDF (1.461 MB)
• References

Open Access

Dynamic study of milling low depth channels 02013

Dorin Mircea Rosca, Mircea Anton Vasiloni and Milena Folea

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179402013

• Abstract
• PDF (313.1 KB)
• References

Open Access

Influence of the amount of deformation on the change in the porosity of sinters subjected to free cold upsetting 02014

Mariusz Rosiak and Jerzy Napiórkowski

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179402014

• Abstract
• PDF (493.8 KB)
• References

Open Access

State space analysis of flexible manufacturing cell using timed colored Petri nets 02015

Sanjib Kumar Saren and Florin Blaga

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179402015

• Abstract
• PDF (3.073 MB)
• References

Open Access

Experimental and numerical investigations of the steel sheets formability with hydroforming 02016

Radu Vasile, Sever-Gabriel Racz and Octavian Bologa

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179402016

• Abstract
• PDF (2.135 MB)
• References

Open Access

Changes in the mechanical properties and microstructure of anisotropic austenitic stainless sheet steel after uniaxial tensile test 02017

Emil Yankov and Maria Nikolova

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179402017

• Abstract
• PDF (7.569 MB)
• References

Open Access

Study of kerf geometry of multilayers materials in abrasive water jet cutting process 03001

Bogdan Barabas and Andrea Deaconescu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179403001

• Abstract
• PDF (604.6 KB)
• References

Open Access

Study on SLM manufacturing of teeth used for dental tools testing 03002

George Razvan Buican, Gheorghe Oancea and Rui F. Martins

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179403002

• Abstract
• PDF (11.73 MB)
• References

Open Access

Experimental research on the machinability of Hardox steel by abrasive waterjet cutting 03003

Alexandru Catalin Filip, Mircea Anton Vasiloni and Laurentiu Aurel Mihail

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179403003

• Abstract
• PDF (1.487 MB)
• References

Open Access

Additive manufacturing – a sustainable manufacturing route 03004

Domniţa Frăţilă and Horaţiu Rotaru

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179403004

• Abstract
• PDF (1.091 MB)
• References

Open Access

Identification of in-line defects and failures during Additive Manufacturing Powder Bed Fusion processes 03005

Simina Fulga, Arjana Davidescu and Ira Effenberger

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179403005

• Abstract
• PDF (549.5 KB)
• References

Open Access

Conceptual approach for an in-line quality control system in Additive Manufacturing Powder Bed Fusion processes 03006

Simina Fulga, Arjana Davidescu and Ira Effenberger

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179403006

• Abstract
• PDF (1.038 MB)
• References

Open Access

Considerations on material thickness influence on the AWJ processing quality of an aluminium alloy 03007

Eugen Herghelegiu, Maria Crina Radu, Carol Schnakovszky and Catalin Nicolae Tampu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179403007

• Abstract
• PDF (1.113 MB)
• References

Open Access

Basic research on lattice structures focused on the reliance of the cross sectional area and additional coatings 03008

Julia Kessler, Nicolae Bâlc, Andreas Gebhardt and Karim Abbas

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179403008

• Abstract
• PDF (396.1 KB)
• References

Open Access

Microstructure and micro-hardness analyses of titanium alloy Ti-6Al-4V parts manufactured by selective laser melting 03009

Camil Lancea, Lucia-Antoneta Chicos, Sebastian Marian Zaharia and Mihai Alin Pop

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179403009

• Abstract
• PDF (1.772 MB)
• References

Open Access

Bending and compression tests for PA 2200 parts obtained using Selective Laser Sintering method 03010

Cristina Stefana Miron-Borzan, Mircea Cristian Dudescu and Petru Berce

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179403010

• Abstract
• PDF (807.2 KB)
• References

Open Access

Effect of vacuum oxy-nitrocarburizing on the microstructure of tool steels: an experimental and modeling study 03011

Maria Nikolova, Danail Nikolov, Bora Derin and Emil Yankov

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179403011

• Abstract
• PDF (4.169 MB)
• References

Open Access

Research on the mechanical behaviour of an airplane component made by selective laser melting technology 03012

Răzvan Păcurar, Ancuţa Păcurar and Nicolae Bâlc

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179403012

• Abstract
• PDF (2.686 MB)
• References

Open Access

Tool electrode wear in electrical discharge of small diameter holes 03013

Laurenţiu Slătineanu, Oana Dodun, Iulia Carp, Margareta Coteaţă and Irina Beşliu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179403013

• Abstract
• PDF (168.5 KB)
• References

Open Access

Risk reduction in dimension inspection of the plastic injection-molded parts from mechatronic devices by using optical 3D measuring techniques 04001

Ion Cristian Braga, Anisor Nedelcu and Razvan Udroiu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179404001

• Abstract
• PDF (1.581 MB)
• References

Open Access

Statistical analysis of the measurement errors in an installation of water meters. Study on the volume of the water loss in the installation 04002

Mihaela Rodica Clinciu and Ramona Clinciu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179404002

• Abstract
• PDF (845.2 KB)
• References

Open Access

Method for determining the calibration life of measuring devices. Case study – water meters 04003

Mihaela Rodica Clinciu and Ramona Clinciu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179404003

• Abstract
• PDF (602.9 KB)
• References

Open Access

Identification and analysis of incompatibilities occurring in the granite slabs manufacturing 04004

Agnieszka Czajkowska and Renata Stasiak-Betlejewska

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179404004

• Abstract
• PDF (961.7 KB)
• References

Open Access

Method of using of the Box-Cox transformation at the application of the xbar and s chart 04005

Nicolae Eftimie

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179404005

• Abstract
• PDF (1.103 MB)
• References

Open Access

Choice and assessment of improvement measures critical for process operation (in reference to the requirements of ISO 9001:2015) 04006

Adam Górny

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179404006

• Abstract
• PDF (479.3 KB)
• References

Open Access

Investigations of friction-relevant parameters to ensure reliable bolted joints 04007

Max Klöcker and Sebastian Westphal

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179404007

• Abstract
• PDF (757.9 KB)
• References

Open Access

Robust development of a CNC turning process 04008

Laurentiu – Aurel Mihail

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179404008

• Abstract
• PDF (1.180 MB)
• References

Open Access

Reliability analysis of scarifying tooth for trailed scarifier 04009

Cristin-Olimpiu Morariu, Adela-Eliza Dumitrascu and Doina Valentina Ciobanu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179404009

• Abstract
• PDF (647.8 KB)
• References

Open Access

Statistical inferences for bearings life using sudden death test 04010

Cristin-Olimpiu Morariu and Sebastian-Marian Zaharia

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179404010

• Abstract
• PDF (118.6 KB)
• References

Open Access

Quantification of the quality problems in the construction machinery production 04011

Renata Stasiak-Betlejewsk and Agnieszka Czajkowska

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179404011

• Abstract
• PDF (186.1 KB)
• References

Open Access

Comparison of the methods for determination of calibration and verification intervals of measuring devices 04012

Pavlina Toteva, Stoyan Slavov and Dimka Vasileva

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179404012

• Abstract
• PDF (189.3 KB)
• References

Open Access

An approach to support entries for a design failure modes and effects analysis 05001

Felicia Veronica Banciu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179405001

• Abstract
• PDF (259.5 KB)
• References

Open Access

The CAD drawing as a source of data for robot programming purposes – a review 05002

Krzysztof Foit and Grzegorz Ćwikła

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179405002

• Abstract
• PDF (281.3 KB)
• References

Open Access

Particularities of fully-parallel manipulators in 6-DOFs robots design: a review of critical aspects 05003

Lucian Milica and Gabriel Andrei

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179405003

• Abstract
• PDF (819.0 KB)
• References

Open Access

An analysis of the impact of soil mass pH on the wear process of steel 05004

Jerzy Napiórkowski, Magdalena Lemecha and Mariusz Rosiak

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179405004

• Abstract
• PDF (997.5 KB)
• References

Open Access

The tool profile and the localization of the revolution axis for irregular outline milling 05005

Eugen Pămîntaş

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179405005

• Abstract
• PDF (155.3 KB)
• References

Open Access

Assemblability analysis of the modular fixturing systems with accurate grid pattern holes using Monte Carlo simulation 05006

Tudor Păunescu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179405006

• Abstract
• PDF (745.9 KB)
• References

Open Access

Accuracy analysis of the modular fixturing systems with grid pattern threaded holes 05007

Tudor Păunescu and Rodica Păunescu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179405007

• Abstract
• PDF (1.499 MB)
• References

Open Access

Design of a robotized workstation making use of the integration of CAD models and Robotic Simulation software as way of pairing and comparing real and virtual environments 05008

Karol Velíšek, Radovan Holubek, Daynier Rolando Delgado Sobrino, Roman Ružarovský and Nina Vetríková

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179405008

• Abstract
• PDF (1011 KB)
• References

Open Access

ERP processes automation in corporate environments 06001

Victor Antonoaie, Adrian Irimeş and Lucia-Antoneta Chicoş

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179406001

• Abstract
• PDF (1.371 MB)
• References

Open Access

A multi-criteria decision making approach for supplier selection in the flexible packaging industry 06002

Ciprian Cristea and Maria Cristea

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179406002

• Abstract
• PDF (254.2 KB)
• References

Open Access

A multi-criteria decision making approach for the selection of a flexible packaging equipment 06003

Ciprian Cristea and Maria Cristea

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179406003

• Abstract
• PDF (441.0 KB)
• References

Open Access

Problems of integration of a manufacturing system with the business area of a company on the example of the Integrated Manufacturing Systems Laboratory 06004

Grzegorz Ćwikła and Krzysztof Foit

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179406004

• Abstract
• PDF (2.431 MB)
• References

Open Access

ERP system for 3D printing industry 06005

Bogdan Deaky and Luminița Pârv

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179406005

• Abstract
• PDF (1.317 MB)
• References

Open Access

Model for determining and optimizing delivery performance in industrial systems 06006

Flavia Fechete and Anişor Nedelcu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179406006

• Abstract
• PDF (178.4 KB)
• References

Open Access

Decision models in designing flexible production systems 06007

Adriana Florescu and Sorin Adrian Barabaş

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179406007

• Abstract
• PDF (629.3 KB)
• References

Open Access

Online measurement of work safety culture – statement of research 06008

Izabela Gabryelewicz, Patryk Krupa and Joanna Sadłowska – Wrzesińska

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179406008

• Abstract
• PDF (2.015 MB)
• References

Open Access

Managerial instrument for didactic staff structure optimization for Distance Learning 06009

Cristina Gavrus and Georgiana Limbasan

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179406009

• Abstract
• PDF (118.3 KB)
• References

Open Access

A real options and joint ventures perspective for strategic decision-making process in the case of dynamic industrial environments 06010

Ana - Maria German, Flavius Aurelian Sârbu and Mircea Boşcoianu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179406010

• Abstract
• PDF (200.8 KB)
• References

Open Access

The use of working environment factors as criteria in assessing the capacity to carry out processes 06011

Adam Górny

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179406011

• Abstract
• PDF (262.0 KB)
• References

Open Access

Estimation of the resource buffers in the assembly process of a shearer machine in the CPPM method 06012

Aleksander Gwiazda, Iwona Paprocka and Magdalena Bączkowicz

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179406012

• Abstract
• PDF (2.492 MB)
• References

Open Access

Towards an information extraction and knowledge formation framework based on Shannon entropy 06013

Dragoș Iliescu and Marian Gheorghe

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179406013

• Abstract
• PDF (370.5 KB)
• References

Open Access

Investigations regarding the lowering of specific intellectual property risks identified in the production process 06014

Ramona Pakocs and Nouraș Barbu Lupulescu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179406014

• Abstract
• PDF (2.775 MB)
• References

Open Access

Scheduling of an assembly process of a chosen technical mean using the critical chain approach 06015

Iwona Paprocka, Aleksander Gwiazda and Magdalena Bączkowicz

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179406015

• Abstract
• PDF (2.403 MB)
• References

Open Access

Continuous improvement processes using Lean Management tools. A case study 06016

Luminița Pârv

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179406016

• Abstract
• PDF (557.0 KB)
• References

Open Access

The use of IT tools for the analysis and evaluation of psychomotor efficiency of employees 06017

Joanna Sadłowska – Wrzesińska, Izabela Gabryelewicz and Patryk Krupa

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179406017

• Abstract
• PDF (776.9 KB)
• References

Open Access

Analysis heat transfer in engineering barriers used FEM and experimental method 07001

Dariusz Andrzejewski and Mariusz Prazmowski

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179407001

• Abstract
• PDF (1.013 MB)
• References

Open Access

Research experimental of hipbone arthroplasties using tensometric models 07002

Horatiu Bulea

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179407002

• Abstract
• PDF (878.9 KB)
• References

Open Access

Leading the creativity 07003

Simona Sofia Duicu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179407003

• Abstract
• PDF (135.2 KB)
• References

Open Access

Parametric programming of CNC machine tools 07004

Rafał Gołębski

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179407004

• Abstract
• PDF (990.0 KB)
• References

Open Access

Full factorial DOE to determine the influence of the process parameters in cleaning water jets used in sewer cleaning 07005

Nicolae Medan, Mircea Lobontiu and Mihai Banica

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179407005

• Abstract
• PDF (1.649 MB)
• References

Open Access

An analysis of gearing 07006

Tadeusz Nieszporek, Piotr Boral and Rafał Gołębski

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179407006

• Abstract
• PDF (582.1 KB)
• References

Open Access

Examination of the cylindrical worm profile 07007

Tadeusz Nieszporek and Piotr Boral

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179407007

• Abstract
• PDF (323.9 KB)
• References

Open Access

The preparation for being a researcher in Romania today 07008

Eugen Pămîntaş and Felicia Veronica Banciu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179407008

• Abstract
• PDF (1.664 MB)
• References

Open Access

Impact of employee age on the safe performance of production tasks 07009

Małgorzata Rembiasz

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179407009

• Abstract
• PDF (136.5 KB)
• References

Open Access

Elbow joint rehabilitation equipment actuated by pneumatic muscles 07010

Georgiana Vetrice and Andrea Deaconescu

Published online: 04 January 2017

DOI: https://doi.org/10.1051/matecconf/20179407010

• Abstract
• PDF (1.168 MB)
• References