EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 95 (2017) MATEC Web Conf., 95 (2017) 06002 References
Open Access
Issue
MATEC Web Conf.
Volume 95, 2017
2016 the 3rd International Conference on Mechatronics and Mechanical Engineering (ICMME 2016)
Article Number 06002
Number of page(s) 5
Section Power Mechanical Engineering
DOI https://doi.org/10.1051/matecconf/20179506002
Published online 09 February 2017
  1. Krivoshapko S.N. Helicoidal shells. Problems in theory and practice of engineering research, p.132–136. (1998). [Google Scholar]
  2. Krivoshapko S.N. Geometry and strength of general helicoidal shells, Appl. Mech. Rev., 52, No 5, p.161–175 (1999). [CrossRef] [Google Scholar]
  3. Krivoshapko S.N., Ivanov V.N. Encyclopedia of Analytical Surfaces, Springer, 752 p. (2015). [Google Scholar]
  4. Pylypaka S.F. Control of bending of ruled surfaces on an example of a screw conoid. Prikl. Geom. ta Inzh. Grafika, 70, p. 180–186 (2002). [Google Scholar]
  5. Cohen J.W. On stress calculations in helicoidal shells and propeller blades. Holland, Walman, 100 p. (1955). [Google Scholar]
  6. M.I. Rynkovskaya. Analytical Methods of Analysis of Right and Open Helicoids. Northeast Amer. Society of Eng. Educ. Conf., P.1–5 (2009). [Google Scholar]
  7. Yaroshenko A.R. Axe-symmetrical deformation of helicoidal shell with rectangular profile. Din. i Prochn. Mashin, 12, p. 3–9 (1971). [Google Scholar]
  8. Tupikova E.M. Analysis of the thin elastic shells in the form of long oblique helicoid, Struct. Mech. of Eng. Constr. and Build., № 3, p. 23–27 (2015). [Google Scholar]
  9. Badjoriya G.Ch. Analysis of long developable helicoid on moment theory in displacements. Struct. Mech. and Calcul. of Structures, 3, p.22–24 (1985). [Google Scholar]
  10. Krivoshapko S.N., Kumudini D. Analysis of thin elastic shells in the form of Archimedes screw with the same angles of inclination of its generatrixes. Math. Probl. in Phys. and Techn., MFTI, p. 96–103 (1992). [Google Scholar]
  11. Krivoshapko S.N. Geometry of linear surfaces with the return rib and linear theory for torso-helicoid calculation, RUDN, p.357 (2009). [Google Scholar]
  12. M. Rynkovskaya, On application of Bernoulli’s numbers for thin torso-helicoids calculated by asymptotic method of small parameter, MOO Spatial Structures, 12, p. 59–64 (2009). [Google Scholar]
  13. Halabi S.M. Moment theory of thin helicoidal pseudo-developable shells. Struct. Mech. of Eng. Constr. and Build. , 10, p. 61–67 (2001). [Google Scholar]
  14. Roberts A.W., Manjunath K.S., Mcbride W. The mechanics of screw feeder performance for bulk solids flow control. Nat. Conf. Publ., Inst. Eng., 92/7, Р. 333–338 (1992). [Google Scholar]
  15. Dabrowski Otton, Sapian Czeslaw. Loading of a central screw chute in a coal storage container. Pr. nauk. Inst. beed. pwrocl., 51, Р. 125–130 (1987). [Google Scholar]
  16. Teraoka Ats. Analisis del husillo de alta plastificacion para el moldeo por inyeccion. Rev. plast. mod., 46, № 463, Р. 55–64 (1995). [Google Scholar]
  17. Iura Masashi and Hirashima Masaharu. Fourier analysis of shallow right helicoidal shells. Trans. Jap. Soc. Civ. Eng., 14, Р. 55–59 (1984). [Google Scholar]
  18. Knabel J., Lewinski T. Selected equilibrium problem of thin elastic helicoidal shells. Arch. Civil Eng., 42(2), P. 245–257 (1999). [Google Scholar]
  19. Kielb R.E., Leissa A.W., MacBain J.C. Vibrations of twisted cantilever plates - a comparison of theoretical results. Int. J. for NumericaL Meth. in Engineering, 21, Р. 1365–1380 (1985). [CrossRef] [Google Scholar]
  20. Hoyashita Shigeru. Calculation method for profile of helical gear with tooth-trace modification finished by worm-shaped tool or form grinding wheel, Jap. Soc. Mech. Eng. C., 61, №583, Р. 1149–1156 (1995). [Google Scholar]
  21. Krivoshapko S.N., Gbaguidi A.G. Two methods of analysis of thin elastic open helicoidal shells.Int. Journ. of Res. and Rev.in Appl. Sc., 12, Iss.3, p.382–390 (2012). [Google Scholar]
  22. Taylor D.W. The Speed and Power of Ships. – Ransdell Incorporated, Washington D.C., 130 p. (1933). [Google Scholar]
  23. Panov D.Yu. Wind screw calculation [Raschet vozdushnogo vinta], Tr. TzAGI, 288 (1937). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.