Open Access
MATEC Web Conf.
Volume 95, 2017
2016 the 3rd International Conference on Mechatronics and Mechanical Engineering (ICMME 2016)
Article Number 08008
Number of page(s) 5
Section Robot Design and Control
Published online 09 February 2017
  1. M. Švaco, B. Šekoranja, F. Šuligoj, et al., Calibration of an Industrial Robot Using a Stereo Vision System, Procedia Engineering, 69, 459-463 (2014) [CrossRef] [Google Scholar]
  2. S. A. Hayati, Robot arm geometric link parameter estimation, Decision and Control, 1983. The 22nd IEEE Conference on, 1477–1483 (1983) [Google Scholar]
  3. A. Nubiola, I. A. Bonev, Absolute calibration of an ABB IRB 1600 robot using a laser tracker, Robotics and Computer-Integrated Manufacturing, 29, 236–245 (2013) [CrossRef] [Google Scholar]
  4. A. Nubiola, I. A. Bonev, Absolute robot calibration with a single telescoping ballbar, Precision Engineering, 38, 472–480 (2014) [CrossRef] [Google Scholar]
  5. W. Zhenhua, X. Hui, C. Guodong, et al., A distance error based industrial robot kinematic calibration method, Industrial Robot: An International Journal, 41, 439–446 (2014) [Google Scholar]
  6. J. Zhou, H. N. Nguyen, H. J. Kang, Selecting Optimal Measurement Poses for Kinematic Calibration of Industrial Robots, Advances in Mechanical Engineering, 6, 291389–291389 (2015) [CrossRef] [Google Scholar]
  7. J. Santolaria, J.-A. Yagüe, R. Jiménez, et al., Calibration-based thermal error model for articulated arm coordinate measuring machines, Precision Engineering, 33, 476–485 (2009) [CrossRef] [Google Scholar]
  8. A. Nubiola, M. Slamani, A. Joubair, et al., Comparison of two calibration methods for a small industrial robot based on an optical CMM and a laser tracker, Robotica, 32, 447–466 (2013) [CrossRef] [Google Scholar]
  9. A. Joubair, M. Slamani, I. A. Bonev, Kinematic calibration of a five-bar planar parallel robot using all working modes, Robotics and Computer-Integrated Manufacturing, 29, 15–25 (2013) [CrossRef] [Google Scholar]
  10. G. Du, P. Zhang, Online robot calibration based on vision measurement, Robotics and Computer-Integrated Manufacturing, 29, 484–492 (2013) [CrossRef] [Google Scholar]
  11. A. Joubair, I. A. Bonev, Kinematic calibration of a six-axis serial robot using distance and sphere constraints, The International Journal of Advanced Manufacturing Technology, 77, 515–523 (2014) [CrossRef] [Google Scholar]
  12. N. Xi, Y. Liu, Low-cost and automated calibration method for joint offset of industrial robot using single-point constraint, Industrial Robot, 38, 577–584 (2011) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.