Volume 321 (2020)

Free Access to the whole issue

MATEC Web of Conferences

Volume 321 (2020)

The 14^th World Conference on Titanium (Ti 2019)

Nantes, France, June 10-14, 2020
P. Villechaise, B. Appolaire, P. Castany, M. Dehmas, C. Delaunay, J. Delfosse, A. Denquin, E. Gautier, L. Germain, N. Gey, T. Gloriant, J.-Y. Hascoët, S. Hémery, Y. Millet, D. Monceau, F. Pettinari-Sturmel, M. Piellard, F. Prima and B. Viguier (Eds.)

Export the citation of the selected articles Export
Select all

Open Access

Statement of Peer review

Published online: 12 October 2020

PDF (884 KB)

Open Access

Preface 00001

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032100001

Plenary Lectures

Open Access

Current Situation of Titanium Research, Development and Applications in China 01001

Hui Chang and Lian Zhou

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032101001

Open Access

New research and development of titanium production and application in the CIS 01002

A. Alexandrov

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032101002

Open Access

Developments in Titanium Research and Applications in Germany 01003

Carsten Siemers and Christian Stöcker

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032101003

Open Access

Recent activities of titanium research and development in Japan 01004

Takayuki Narushima and Yasuaki Sugizaki

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032101004

Open Access

Titanium in France: research activities, industrial developments and applications 01005

P.-F. Louvigné

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032101005

Open Access

Titanium Research Developments in the United Kingdom 01006

Martin Jackson

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032101006

Open Access

RECENT ADVANCES IN TITANIUM TECHNOLOGY IN THE UNITED STATES 01007

Dongjian(Don) Li and Vasisht Venkatesh

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032101007

Keynote Lectures

Open Access

Titanium in Shipbuilding and Other Technical Applications 02001

A.S. Oryshchenko, V.P. Leonov, V.I. Mikhailov, P.A. Kuznetsov and A.V. Alexandrov

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032102001

Open Access

Progress and status in wrought processing of titanium alloys 02002

M. Leder and A. Volkov

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032102002

Open Access

Application of Titanium and its Alloys for Automobile Parts 02003

Kazuhiro Takahashi, Kenichi Mori and Hidenori Takebe

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032102003

Open Access

Recent Studies and Developments in Titanium Biomaterials 02004

M. Ikedaa, M. Ueda and M. Ninomi

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032102004

Open Access

Advances and Breakthroughs in Titanium forgings for critical structural parts 02005

J. Lecadet, R. Forestier and P. Delaborde

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032102005

Open Access

Exploitation of field assisted sintering technology (FAST) for titanium alloys 02006

N. S. Weston, B. Thomas and M. Jackson

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032102006

Open Access

Opportunities and Challenges for the Industrial Titanium Market 02007

Hershel Robert Henson

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032102007

Additive and Near Net Shape Manufacturing

Open Access

Study on the origins of residual stresses in Ti-6Al-4V processed by additive manufacturing 03001

Nathan Dumontet, Benoit Malard and Bernard Viguier

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103001

Open Access

Study of Arc-wire and Laser-wire processes for the realization of Ti-6Al-4V alloy parts 03002

A. Ayed, G. Bras, H. Bernard, P. Michaud, Y. Balcaen and J. Alexis

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103002

Open Access

The uses and applications of hydrogen processing for titanium additive manufacturing 03003

Matthew K. Dunstan, James D. Paramore, Brady G. Butler and Z. Zak Fang

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103003

Open Access

Machine Learning for Competitive Grain Growth Behavior in Additive Manufacturing Ti6Al4V 03004

Jinghao Li, Manuel Sage, Xianglin Zhou, Mathieu Brochu and Yaoyao Fiona Zhao

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103004

Open Access

The influence of microstructure on mechanical properties of SLM 3D printed Ti-6Al-4V 03005

Cecilie V. Funch, Kinga Somlo, Konstantinos Poulios, Sankhya Mohanty, Marcel A.J. Somers and Thomas L. Christiansen

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103005

Open Access

HIGH TEMPERATURE OXIDATION OF TI-6AL-4V ALLOY FABRICATED BY ADDITIVE MANUFACTURING. INFLUENCE ON MECHANICAL PROPERTIES 03006

Antoine CASADEBAIGT, Daniel MONCEAU and Jonathan HUGUES

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103006

Open Access

Impact of process parameters and heat treatment on mechanical properties of Ti64 LBM 03007

Pierre BERNARD

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103007

Open Access

Microscopic strain localisation in WAAM Ti-6Al-4V during uniaxial tensile loading 03008

David Lunt, Alistair Ho, Alec Davis, Filomeno Martina, Jan Hönnige, João Quinta da Fonseca and Phillip Prangnell

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103008

Open Access

Hydride Approach in Blended Elemental Powder Metallurgy of Beta Titanium Alloys 03009

O.M. Ivasishin, D.G. Savvakin, D.V. Oryshych, O.O. Stasiuk and Li Yuanyuan

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103009

Open Access

FAST-forge of novel Ti-6Al-4V/Ti-6Al-2Sn-4Zr-2Mo bonded, near net shape forgings from surplus AM powder 03010

Oliver Levano, Nicholas Weston, Jacob Pope, Adam Tudball, David Lunn, Gavin Baxter and Martin Jackson

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103010

Open Access

An Overview of Cold Spray Additive Technology in Australia for Melt-less Manufacture of Titanium 03011

Saden H. Zahiri, Stefan Gulizia and Leon Prentice

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103011

Open Access

Qualification of Customised Medical Implants Produced by Ti6Al4V(ELI) Additive Manufacturing 03012

W B du Preez and G J Booysen

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103012

Open Access

Topology optimisation of an aircraft nose-wheel fork for production in Ti6Al4V by the Aeroswift high-speed laser powder bed fusion machine 03013

L F Monaheng, W B du Preez, N Kotze and M Vermeulen

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103013

Open Access

Microstructure and Properties of 3D Ti-6Al-4V Articles Produced with Advanced Co-axial Electron Beam & Wire Additive Manufacturing Technology 03014

Dmytro Kovalchuk, Orest Ivasishin and Dmytro Savvakin

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103014

Open Access

On the advances to obtain excellent and repeatable mechanical properties and build quality of LaserForm® Ti gr23 (A) across whole build platform 03015

Anthony Beckers, Gokula Krishna Muralidharan, Karel Lietaert, Nachiketa Ray, Pierre Van Cauwenbergh, Koen Vanacken, Lore Thijs and Jonas Van Vaerenbergh

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103015

Open Access

Effect of Manufacturing Process of Master Alloy Powders on Homogeneity of Sintered Ti-5Al-1Fe by Blended Elemental Powder Metallurgy 03016

Masashi Hayakawa, Hideki Fujii, Matsuhide Horikawa, Yosuke Inoue and Masahiro Morita

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103016

Open Access

Repairing Ti-6Al-4V aeronautical components with DED additive manufacturing 03017

Matthieu Rauch, Jean-Yves Hascoët and Manjaiah Mallaiah

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103017

Open Access

Titanium Ti6Al4V alloy reinforced by the addition of nano yttria stabilized zirconia fabricated by selective additive manufacturing: microstructure and mechanical investigations 03018

Amine HATTAL, Madjid DJEMAI, Jean Jacques FOUCHET, Thierry CHAUVEAU, Brigitte BACROIX, Azziz HOCINI and Guy DIRRAS

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103018

Open Access

Microstructure development in Laser Metal Deposition of Ti-5553 03019

C. Hicks, T. Konkova and P. Blackwell

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103019

Open Access

Direct Laser Additive Manufacturing of TiAl Intermetallic Compound by Powder Directed Energy Deposition (DED) 03020

Damien Choron, Serge Naveos, Marc Thomas, Johan Petit and Didier Boisselier

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103020

Open Access

Texture of electron beam melted Ti-6Al-4V measured with neutron diffraction 03021

M. Neikter, R. Woracek, C. Durniak, M. Persson, M.-L. Antti, P. Åkerfeldt, R. Pederson, J. Zhang, S.C. Vogel and M. Strobl

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103021

Open Access

LINEAR FRICTION WELDING – PROCESS DEVELOPMENT AND APPLICATIONS IN AEROSPACE INDUSTRY 03022

Y. SADALLAH

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103022

Open Access

Microstructural Stability of Ti based Composites Fabricated by Spark Plasma Sintering 03023

Yoshimi Watanabe, Miwa Hattori, Tadachika Chiba and Hisashi Sato

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103023

Open Access

Process variation in Selective Laser Melting of Ti-6Al-4V alloy 03024

Zhuoer Chen, Caroline Lee, Sheng Cao, Xuerui Lyu, Xinhua Wu and Chris Davies

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103024

Open Access

SERIES PARTS MANUFACTURING BY INFRARED SUPERPLASTIC FORMING WITH NUMERICAL TECHNIQUES FOR THERMAL REGULATION 03025

LAMIC Elise, MAUDUIT Damien, NAZARET Fabien, GILBLAS Rémi, POTTIER Thomas and CUTARD Thierry

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103025

Open Access

In situ synchrotron X-ray diffraction line-profile analysis of additively manufactured Ti−6Al−4V alloy under tensile deformation 03026

K. Yamanaka, A. Kuroda, M. Ito, M. Mori, T. Shobu, S. Sato and A. Chiba

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103026

Open Access

Effect of Heat Treatments on Fatigue Properties of Ti-6Al-4V Alloy Fabricated by EBM Additive Manufacturing 03027

Dong-Geun Lee and Youngsin Choi

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103027

Open Access

Recycling of titanium alloy swarf directly into wire using the Conform^TM continuous extrusion process 03028

Sarah A. Smythe, Ben Thomas, Daniel Suarez-Fernandez, Xin Fang, Benoit Marguet and Martin Jackson

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103028

Open Access

X-ray Micro Tomography Study of Internal Defects of Electron Beam Melted Ti6Al4V and Their Effect on Fatigue Behavior 03029

Viktor Sandell, Thomas Hansson, Fredrik Forsberg, Henrik Lycksam, Pia Åkerfeldt and Marta-Lena Antti

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103029

Open Access

An innovative method to assess and manage residual stresses in additively manufactured titanium 03030

A. Germain, I. Freiherr von Thüngen, M. Piellard and C. Metton

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103030

Open Access

Ti-6Al-4V microstructural orientation at different length scales as a function of scanning strategies in Electron Beam Melting in additive manufacturing 03031

Priyanka Agrawal, Maria J. Quintana, Matt Kenney, Sabina Kumar, Alec Saville, Amy Clarke and Peter C. Collins

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103031

Open Access

From the fatigue properties of Ti6Al4V produced by ALM selective laser melting process to the mechanical design of an aeronautical part 03032

François Edy, Viet-Duc LE, Claudia BIERE, Monica Perez, Etienne Pessard and Franck Morel

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103032

Open Access

Development of constitutive equations for hot working of titanium matrix composites 03033

Lihua Du, Zhusheng Shi, Yuanfei Han, Jie Shao, Kailun Zheng, Yong Li and Weijie Lu

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103033

Open Access

Laser polishing of titanium surfaces obtained by additive manufacturing process 03034

Benoit Rosa and Jean-Yves Hascoët

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103034

Open Access

An experimental study of Ti-6Al-4V powder reactivity in gaseous environment: Application to additive manufacturing 03035

Mohamad Mahdi Siblani, Maelig Ollivier and Loïc Favergeon

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103035

Open Access

Numerical simulation of Rapid Additive Forging (RAF) process 03036

Lionel Depradeux, Corentin Robitaille, Gilles Duval, Luc Eckenfelder and Camille Locatelli

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103036

Open Access

Influence of wire arc additive manufacturing of Ti-6Al-4V on microstructure and mechanical properties for potential large-scale aviation parts 03037

D. Elitzer, H.W. Höppel, M. Göken, D. Baier, C. Fuchs, H. Bähr, T. Meyer and A. Gallasch

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032103037

Aerospace Applications

Open Access

Improving the high temperature oxidation resistance of Ti-β21S by mechanical surface treatment 04001

L. Lavisse, A. Kanjer, K. Cheveau, V. Optasanu, P. Peyre, C. Gorny, M. François, A. Tidu, C. Schuman, F. Herbst et al. (3 more)

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104001

Open Access

An analysis of thermo-mechanical fatigue crack growth in the titanium alloy Ti-6246 04002

J. Palmer, J. Jones, M. Whittaker and S. Williams

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104002

Open Access

The Role of Oxygen in α₂ Formation in the Titanium Model Alloy Ti-7Al 04003

H. M. Gardner, A. Radecka, D. Rugg, D. E. J. Armstrong, M. P. Moody and P. A. J. Bagot

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104003

Open Access

Micromechanical approaches to understand dwell fatigue: from titanium a-b microstructures to disc thermal alleviation 04004

Zebang Zheng, Zhen Zhang, Ben Britton and Fionn Dunne

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104004

Open Access

Normal and dwell fatigue behavior of a near-alpha titanium alloy - IMI 834 04005

K.U. Yazar, Anish Karmakar, Vivek Sahu, Amit Bhattacharjee and Satyam Suwas

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104005

Open Access

Properties of Novel High Temperature Titanium Alloys for Aerospace Applications 04006

John Mantione, Matias Garcia-Avila, Matthew Arnold, David Bryan and John Foltz

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104006

Open Access

Failure investigation as a route to improving integrity of titanium alloys in service 04007

C. Collins, F.F. Dear, D. Rugg and D. Dye

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104007

Open Access

Aerospace Titanium Alloy Melt Process Quality Improvements 04008

Andrew Woodfield and Gérard Lemaitre

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104008

Open Access

Effect of oxygen contents on strain rate sensitivity of commercially pure titanium 04009

Min-Su Lee, Yong-Taek Hyun and Tea-Sung Jun

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104009

Open Access

Safety Evaluation for Pure Titanium by Lock-in Infrared Thermography 04010

T. Matsunaga, N. Nagashima, T. Nojima and S. Sugimoto

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104010

Open Access

High temperature oxidation and mechanical behavior of β21s and Ti6242S Ti-based alloys 04011

Aurelie Vande Put, Carole Thouron, Philippe Emile, Raphaëlle Peraldi, Benjamin Dod and Daniel Monceau

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104011

Open Access

A Novel Technique to Assess the Effect of Machining and Subsurface Microstructure on the Fatigue Performance of Ti-6Al-2Sn-4Zr-6Mo 04012

Daniel Suárez-Fernández, Bradley P. Wynne, Pete Crawforth, Katharine Fox and Martin Jackson

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104012

Open Access

Superior Oxidation Resistance Titanium Alloy ARCONIC-THOR^TM for Aerospace Applications 04013

Sesh Tamirisakandala, Ernie Crist, Fusheng Sun and Matthew Dahar

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104013

Open Access

Effect of microstructure on tensile properties of Ti-17 alloys forged using a 1500-ton forging simulator 04014

Y. Yamabe-Mitarai, S. Kuroda, N. Motohashi, H. Matsumoto, G. Miyamoto, Y. Yoshida, K. Yamanaka, M. Niinomi and Y. Itsumi

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104014

Open Access

Effect of Microstructure on Fatigue Properties of Several Ti-Alloys for Aerospace Application 04015

A. El-Chaikh, A. Danzig and D. Muenter

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104015

Open Access

Tensile properties of α-titanium alloys at elevated temperatures 04016

Tarik Nawaya, Werner Beck and Axel von Hehl

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104016

Open Access

Influence of soft interlayers on fretting fatigue and fretting wear resistance of Ti-6Al-4V alloy 04017

Amin Ma, Daoxin Liu and Xiaohua Zhang

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104017

Open Access

Role of refractory elements in near-alpha titanium alloys on high temperature mechanical properties 04018

Z. Huvelin, C. Gouroglian, N. Horézana and S. Naka

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104018

Open Access

LINEAR FRICTION WELDING – PROCESS CONTROL AND MACHINE TECHNOLOGY 04019

N. PIOLLE

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104019

Open Access

TITANIUM SHEET HOT FORMING IN THE AEROSPACE INDUSTRY 04020

Guillaume SANA

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104020

Open Access

Effect of silicon on creep properties of titanium 6Al-2Sn-4Zr-2Mo alloy 04021

M-L Anti, V Collado Ciprés, J Mouzon, P. Åkerfeldt and R Pederson

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104021

Open Access

The Bonding of Additive Manufactured Ti-6Al-4V via the Powder Interlayer Bonding (PIB) Process 04022

P. Davies, H. Davies and S. Marchisio

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104022

Open Access

DEMONSTRATION OF THE APPLICATION OF SUPERPLASTIC FORMING USING INFRARED HEATING EMITTERS TO A PART OF STRUCTURE INCLUDING VARIOUS GEOMETRICAL SINGULARITIES 04023

Elise LAMIC, Nicolas FLEURISSON, Fabien NAZARET, Jean-Pierre BONNAFÉ, Ludovic ROPARS and Alexandre COLLOT

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104023

Open Access

The orbital friction welding process for engines components in aeronautic 04024

Jérémy Escaffre, Yann Lefaux and Astrid Lenain

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104024

Open Access

Hot salt stress corrosion cracking by silver chloride in Ti-6Al-2Sn-4Zr-6Mo 04025

Yitong Shi, Sudha Joseph, Trevor Lindley, Rebecca Sandala, Edward Saunders and David Dye

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104025

Open Access

Development of numerical tool for hybrid manufacturing process for titanium sheet metal forming 04026

Mohamed ACHOURI

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104026

Open Access

Effect of Edge Conditions on the Formability of Commercially Pure Titanium Sheet (Grade 2) at Room Temperature 04027

J.S. Kwame, E. Yakushina and P. Blackwell

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104027

Open Access

Superplastic Behaviour of Ti54M and Ti64 04028

Paranjayee Mandal, Ares Gomez-Gallegos, Diego Gonzalez, Hosam Elrakayby and Paul Blackwell

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104028

Open Access

Evolution of mechanical properties of Ti6242S alloy after oxidation in air at 560°C: influence of solid salts deposits 04029

Ioana POPA, Maxime BERTHAUD, Clément CISZAK, Jean-Michel BROSSARD, Daniel MONCEAU and Sébastien CHEVALIER

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104029

Open Access

“Microstructure and mechanical characterisation of titanium alloy linear friction welds” 04030

Bertrand Flipo, Kathryn Beamish, Bryan Humphreys and Martin Wood

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104030

Open Access

The Bonding of Additive Manufactured Ti-6Al-4V via the Powder Interlayer Bonding (PIB) Process 04041

P. Davies, H. Davies and S. Marchisio

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032104041

Biomedical and Healthcare Applications

Open Access

Influences of Mo addition on mechanical properties and deformation behavior of β-type Ti alloys 05001

K. Cho, R. Morioka and H.Y. Yasuda

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032105001

Open Access

Control of crystallographic orientation by metal additive manufacturing process of β-type Ti alloys based on the bone tissue anisotropy 05002

Takayoshi Nakano, Takuya Ishimoto, Aira Matsugaki, Koji Hagihara, Yuichiro Koizumi and Ryosuke Ozasa

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032105002

Open Access

Development of α+β-type biomedical Ti–Nb alloys with high oxygen content 05003

K. Ueda, M. Omiya, Y. Hirose and T. Narushima

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032105003

Open Access

Controlling of mechanical property in additive manufactured porous titanium by structural control and alloying for bone substitutes 05004

Masato Ueda and Masahiko Ikeda

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032105004

Open Access

Study of superelastic performance on novel (Ti-Zr)-based alloy: Influence of thermal treatment time 05005

J.J. Gao, P. Castany, D. Laillé, I. Thibon and T. Gloriant

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032105005

Open Access

Second-generation Titanium alloys Ti-15Mo and Ti-13Nb-13Zr: A Comparison of the Mechanical Properties for Implant Applications 05006

Florian Brunke, Carsten Siemers and Joachim Rösler

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032105006

Open Access

Fabrication and bioresorbability of Ag- and Ta-containing amorphous calcium phosphate films formed on titanium substrates by RF magnetron sputtering 05007

Jun Wu, Kyosuke Ueda and Takayuki Narushima

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032105007

Open Access

Aluminum- and Vanadium-free Titanium Alloys for Medical Applications 05008

Fabian Haase, Carsten Siemers, Lina Klinge, Cheng Lu, Patric Lang, Stephan Lederer, Till König and Joachim Rösler

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032105008

Open Access

Cannulated bar technology for the orthopaedics: application and processing 05009

François Ory, Jean-Luc Fraysse and Philippe Veisse

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032105009

Open Access

Sintering of Ti-based biomedical alloys with increased oxygen content from elemental powders 05010

J. Stráský, J. Kozlík, K. Bartha, D. Preisler and T. Chráska

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032105010

Open Access

Effect of Thermo-mechanical Treatment on Microstructure and Mechanical Properties of Two-phase TiNbO Alloy 05011

Wang Junshuai, Ma Chaoli and Xiao Wenlong

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032105011

Open Access

Extra-high oxygen addition as a new strengthening strategy to overcome strength/ductility trade-off in fully biocompatible hexagonal titanium alloys 05012

Régis Poulain, Stéphanie Delannoy, Jean-Philippe Couzinié, Ivan Guillot, Emmanuel Clouet and Frédéric Prima

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032105012

Open Access

Achieving high strength and low Young’s modulus by controlling the beta stabilizers content in Ti-Nb-Ta-Zr-O alloys 05013

D. Preisler, J. Stráský, M. Janovská, H. Becker, P. Harcuba and M. Janeček

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032105013

Open Access

Mechanical and electrochemical response in Surface treated low modulus biomedical alloy Ti-Nb-Ta-O 05014

Srijan Acharya, Shaurya Singh Dabas, Satyam Suwas and Kaushik Chatterjee

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032105014

Open Access

Effect of titanium plate fixation on bone healing 05015

Norain Binti Abdullah, Masaaki Nakai, Yuki Kawamura, Ei Yamamoto and Mitsuo Niinomi

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032105015

Open Access

Development of elastically graded titanium alloys for biomedical applications 05016

Stéphanie DELANNOY, Sarah BAÏZ, Pascal LAHEURTE, Laurence JORDAN and Frédéric PRIMA

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032105016

Open Access

Phase transformations during continuous heating: effect of Sn addition on the microstructure of Ti-13Mo alloy 05017

M.G. de Mello, F.H. da Costa and R. Caram

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032105017

Open Access

Effect of Nb addition on high-temperature oxidation behavior, oxide layer structure, and its exfoliation resistance of Ti-Nb Alloys 05018

Eri Miura-Fujiwara, Yuya Ogawa, Mitsuo Niinomi and Tohru Yamasaki

Published online: 12 January 2021

DOI: https://doi.org/10.1051/matecconf/202032105018

Environmental Behavior

Open Access

Corrosion Resistance of Ultrafine-grained Titanium Alloys in Different Corrosive Environments 06001

Yuecheng Dong, Xin Li, Zequn Yu, Igor Alexandrov, Hui Chang and Lian Zhou

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032106001

Open Access

Correlation between susceptibility to environment-assisted cracking of super-elastic TiNi alloy and the states and their amount of hydrogen in it 06002

Takumi Haruna, Daiki Morihashi and Youhei Hirohata

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032106002

Open Access

Suppressing the oxygen ingress into Ti-alloys by a one-step Al- plus F-treatment 06003

Alexander Donchev and Mathias Galetz

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032106003

Open Access

Oxygen/nitrogen-assisted embrittlement of titanium alloys exposed at elevated temperature 06004

D. Texier, Q. Sirvin, V. Velay, M. Salem, D. Monceau, B. Mazères, E. Andrieu, R. Roumiguier and B. Dod

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032106004

Open Access

The nitrogen effect on the oxidation behaviour of Ti6242S titanium-based alloy: contribution of atom probe tomography 06005

C. Dupressoire, M. Descoins, A. Vande Put, D. Mangelinck, P. Emile and D. Monceau

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032106005

Open Access

Corrosion of titanium alloys in pressurized water at 300 °C and 15 MPa 06006

BIGNON Quentin, AUZOUX Quentin, MARTIN Frantz, RAYNAL Amandine, MISERQUE Frédéric, TABARANT Michel, LATU-ROMAIN Laurence and WOUTERS Yves

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032106006

Open Access

Research Progress and Trend of Plasma Metallurgy on Titanium Metallic Surface 06007

Li Zhengxian, Zhao Wen, Ji Shouchang, Xu Zhong and Zhou Lian

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032106007

Open Access

Damage mechanisms and embrittlement kinetics in a β-rich Ti 17 alloy after long term aging 06008

Layla SASAKI, Gilbert HENAFF, Mandana ARZAGHI, Patrick VILLECHAISE, Samuel HEMERY and Jérôme DELFOSSE

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032106008

Open Access

Oxidation of Ti–6Al–4V alloy between 450 and 600°C. Evolution of microstructure and mechanical properties 06009

Dominique Poquillon, Coralie Parrens, Alessandro Pugliara, Maxime Perrais and Benoit Malard

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032106009

Open Access

Effects of strain rate on tensile deformation behaviour in Ti-6Al-4V at cryogenic temperature 06010

Min-Ki Ji, Min-Su Lee, Yong-Taek Hyun and Tea-Sung Jun

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032106010

Open Access

H effect on the plasticity of Ti575 alloy 06011

Zhenbo Zhang, David Lunt, Philip Platt and Michael Preuss

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032106011

Open Access

Modelling the high temperature oxidation of titanium alloys: review of analytical models and development of a new numerical tool PyTiOx 06012

C. Ciszak, D. Monceau and C. Desgranges

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032106012

Extraction and Powder Production

Open Access

Synthetic rutile derived titanium alloy development utilising the Metalysis Process and field assisted sintering technology 07001

Simon J. Graham, Lyndsey L. Benson and Martin Jackson

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032107001

Open Access

Development of Method for Direct Deoxidation of Titanium using Mixtures of Magnesium Chloride and Rare-Earth Chlorides 07002

Takanari Ouchi, Chenyi Zheng, Lingxin Kong and Toru H. Okabe

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032107002

Open Access

Titanium Production via Titanium Sulfide 07003

R. O. Suzuki, Y. Yashima, N. Suzuki, E. Ahmadi, S. Natsui and T. Kikuchi

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032107003

Open Access

Investigation of α-Ti plastic anisotropy under thermomechanical loadings: temperature influence on deformation mechanisms 07004

K. E. Agbovi, J. Fajoui, B. Girault, D. Gloaguen, S. Kabra, J. Kelleher and W. Kockelmann

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032107004

Open Access

Effect of Microstructure of Surface Layer in Steel Vessel Used for Sponge Titanium Manufacturing on Fe Elution 07005

Meiji Watanabe, Kazuhiro Taki, Masanori Yamaguchi and Yosuke Inoue

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032107005

Open Access

Electrochemical Deoxidation of Titanium in Molten MgCl₂-HoCl₃ 07006

Lingxin Kong, Takanari Ouchi and Toru H. Okabe

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032107006

Open Access

Manufacturing of High Quality Titanium Thin Foil by Electrodeposition Route 07007

Daisuke Suzuki, Haruka Yamamoto, Matsuhide Horikawa and Hideki Fujii

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032107007

Open Access

Production of spherical titanium alloy powders used in additive manufacturing from titanium scrap 07008

Taras Yanko, Viktor Brener and Olexandr Ovchinnikov

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032107008

Open Access

Kinetic Study of Selective Chlorination of Iron in Ilmenite Ore 07009

So-Yeong Lee, Sung-Hun Park and Ho-Sang Sohn

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032107009

Open Access

Influence of bath composition on Ti metal deposition in molten CaCl₂ containing calcium titanate 07010

T. Takenaka, H. Okada, R. Shimokawa and T. Morishige

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032107010

Open Access

The production of Titanium Powder via Hydrogen Reduction of Titanium Tetrachloride by Inductively Coupled RF plasma 07011

Sung-hun Park, So-yeong Lee, Ho-seong Lee and Ho-sang Son

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032107011

Open Access

A Method for the Production of Titanium-Tantalum Binary Alloys Using the Metalysis-FFC Process 07012

Robert J. Howell, Luke A. Benson Marshall, Martin Jackson and Brad P. Wynne

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032107012

Open Access

Atomization of Ti-64 alloy using the EIGA process: comparison of the characteristics of powders produced in labscale and industrial-scale facilities 07013

Stefan Drawin, Agathe Deborde, Marc Thomas, Michel Pierronnet, Layla Sasaki, Jérôme Delfosse and Olivier Godde

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032107013

Open Access

Thermodynamic Investigation of Titanium Hydride Formation from Reduction of Titanium (Ⅳ) Chloride with Magnesium Hydride in Presence of Hydrogen Atmosphere 07014

Mohammad Rezaei Ardani, Ahmad Fauzi Mohd Noor, Sheikh Abdul Rezan Sheikh Abdul Hamid, Abdul Rahman Mohamed, Hooi Ling Lee and Ismail Ibrahim

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032107014

Intermetallics and MMCs

Open Access

Laser based manufacturing of titanium aluminides 08001

Silja-Katharina Rittinghaus, Veronica Rocio Molina Ramirez, Andreas Vogelpoth, Ulrike Hecht and Janett Schmelzer

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032108001

Open Access

Integrated Computational Materials Engineering of Gamma Titanium Aluminides for Aerospace Applications 08002

Matthew S. Dahar, Sesh A. Tamirisakandala and John J. Lewandowski

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032108002

Open Access

Effect of Mo, V and Zr on the microstructure and mechanical properties of Ti₂AlNb alloys 08003

Yujun Du, Xianghong Liu, Jinshan Li, Wenzhong Luo, Yongsheng He, Xiaohua Zhao and Kaixuan Wang

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032108003

Open Access

Deformation and fracture behavior of in-situ Ti composites reinforced with TiB/nano-sized particles 08004

Yuanfei Han, Xianglong Sun, Pinwang Liu, Guangfa Huang, Lv Xiao and Weijie Lu

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032108004

Open Access

Multi-scale reinforcements stimulated dynamic recrystallization and mechanical behavior of as-extruded titanium matrix composites 08005

Peikun Qiu, Yuanfei Han, Guangfa Huang, Jianwen Le, Lihua Du and Weijie Lu

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032108005

Open Access

The effect of notch size on fatigue crack threshold and propagation in cast gamma titanium aluminide 08006

Claire Trant, Nigel Martin, Mark Dixon, Edward Saunders, Trevor Lindley and David Dye

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032108006

Open Access

Advancement of Plasma Cold-Hearth Melting for Production of Gamma Titanium Aluminide Alloys within Arconic 08008

Ernie Crist, Birendra Jena, Michael Jacques, Matt Dahar, Don Li and Fusheng Sun

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032108008

Open Access

Improvement of high temperature performance of titanium matrix composites by constructing hierarchical microstructure 08009

Lujun Huang and Lin Geng

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032108009

Marine, Gas and Other Industrial Applications

Open Access

Tribological functionalization of titanium alloys by Micro-Arc Oxidation for marine applications 09001

Aude MATHIS, Thierry MILLOT, Vincent BRANGER, Remy MULLER and Jean-Yves GUENEHEUX

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032109001

Open Access

Hydrogen absorption and hydride formation in pure titanium T40 (grade 2) and TA6V ELI (grade 23) under cathodic polarization in artificial seawater 09002

Alexandre POLONI, Abdelali OUDRISS, Juan CREUS, Cyril BERZIOU, Egle CONFORTO, Catherine SAVALL, Simon FRAPPART, Thierry MILLOT, Aude MATHIS and Xavier FEAUGAS

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032109002

Open Access

Improving fatigue performance of surface-damaged Ti-6Al-4V alloy via ultrasonic surface rolling process 09003

Ni Ao, Daoxin Liu and Xiaohua Zhang

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032109003

Open Access

Influence of hydrogen on mechanical properties of pure titanium T40 (grade 2) and TA6V ELI (grade 23): a local approach of fracture 09004

Alexandre POLONI, Abdelali OUDRISS, Juan CREUS, Stéphane COHENDOZ, Jamaa Bouhattate, Simon FRAPPART, Thierry MILLOT, Aude MATHIS and Xavier FEAUGAS

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032109004

Open Access

Impact of rolling conditions on the hydriding of grade 2 titanium welded tubes 09005

La Chance LEPEMANGOYE, Nicolas CRETON, Virgil OPTASANU, Elise DELOYE, Tony MONTESIN, Jean-Jacques FUNDENBERGER and Olivier PERROUD

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032109005

Open Access

Erratum

Erratum to: Hydrogen absorption and hydride formation in pure titanium T40 (grade 2) and TA6V ELI (grade 23) under cathodic polarization in artificial seawater 09006

Alexandre POLONI, Abdelali OUDRISS, Juan CREUS, Cyril BERZIOU, Egle CONFORTO, Catherine SAVALL, Simon FRAPPART, Thierry MILLOT, Aude MATHIS and Xavier FEAUGAS

Published online: 19 November 2020

DOI: https://doi.org/10.1051/matecconf/202032109006

Open Access

Erratum

Erratum to: Influence of hydrogen on mechanical properties of pure titanium T40 (grade 2) and TA6V ELI (grade 23): a local approach of fracture 09007

Alexandre POLONI, Abdelali OUDRISS, Juan CREUS, Stéphane COHENDOZ, Jamaa Bouhattate, Simon FRAPPART, Thierry MILLOT, Aude MATHIS and Xavier FEAUGAS

Published online: 19 November 2020

DOI: https://doi.org/10.1051/matecconf/202032109007

Melting and Casting

Open Access

Beta Fleck formation in Titanium Alloys 10001

K. Kelkar and A Mitchell

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032110001

Open Access

Deoxygenation of liquid titanium with aluminum addition 10002

Daisuke Matsuwaka, Fumiaki Kudo, Hitoshi Ishida and Tetsushi Deura

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032110002

Open Access

Characterization of the thermal flux transferred by the plasma arc to the surface of the liquid bath in the Plasma Arc Melting Cold Hearth Refining process (PAMCHR) 10003

Léa Décultot, Alain Jardy, Stéphane Hans, Emiliane Doridot, Jérôme Delfosse, Fabienne Ruby-Meyer and Jean-Pierre Bellot

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032110003

Open Access

ELECTRON-BEAM MELTING OF INGOTS OF TiAl SYSTEM INTERMETALLICS 10004

S.V. Akhonin, V.A. Berezos and A.Yu. Severyn

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032110004

Open Access

Dissolution Behavior of a Titanium Nitride Sponge in Titanium Alloy Melt 10005

Hideo Mizukami, Tomoyuki Kitaura and Yoshihisa Shirai

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032110005

Open Access

Electron beam melting toward defects-free titanium alloys 10006

H. Funagane, Y. Takeda, M. Wada, H. Mizukami and S. Umeda

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032110006

Open Access

Revisited: gas-saturated defects in titanium alloys 10007

M.O. Leder, I.Yu. Puzakov, N.Yu. Tarenkova, M.A. Kornilova and K.A. Rusakov

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032110007

Open Access

Effect of Melting Interruption on Composition and Microstructure of BT22 Ingot in VAR 10008

Zhengli Hua, Wenzhong Luo, Tao He, Qiang Lei, Longzhou Wang and Xianghong Liu

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032110008

Open Access

Freckles pattern and microstructure feature of Nb-Ti alloy produced by vacuum arc remelting 10009

Jinjin Shang, Yongsheng He, Ce Yang, Ming Wu, Wenzhong Luo and Kaixuan Wang

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032110009

Open Access

Ti and TiAl melting with a semi-industrial PAMCHR 10010

Fabienne Ruby-Meyer, Emiliane Doridot, Jérôme Delfosse and Stéphane Hans

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032110010

Open Access

Industrial applications of modelling tools to simulate the PAMCHR casting and VAR process for Ti64 10011

Emiliane Doridot, Stéphane Hans, Alain Jardy and Jean-Pierre Bellot

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032110011

Open Access

Reactions of alkaline earth zirconate refractories with titanium alloys 10012

Stefan Schafföner

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032110012

Open Access

Titanium alloy design and casting process development using an Integrated Computational Materials Engineering (ICME) approach 10013

Zhi Liang, Jiashi Miao, Anil K. Sachdev, James C. Williams and Alan A. Luo

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032110013

Microstructure - Properties Relationships

Open Access

Effect of stress relaxation on the evolution of residual stress during heat treatment of Ti-6Al-4V 11001

W. Rae and S. Rahimi

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111001

Open Access

Microstructures and tensile properties of a high strength β titanium alloy Ti5Al4Zr8Mo7V by near β forging and β-transus forging 11002

Wenguang Zhu, Jia Lei, Qiaoyan Sun, Lin Xiao and Jun Sun

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111002

Open Access

The Deformation Behavior of Oxygen-Modified Ti-29Nb-13Ta-4.6Zr(wt.%) 11003

V. Khademi, H. Liu, M. Nakai, M. Niinomi and C.J. Boehlert

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111003

Open Access

A Surrogate Approach to Reveal Microstructural Mechanisms Controlling the 3D Short Crack Growth in a Ti-6Al-4V Alloy 11004

Meysam Hassanipour, Shinta Watanabe, Han Li, Kyosuke Hirayama, Hiroyuki Toda, Akihisa Takeuchi and Kentaro Uesugi

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111004

Open Access

Development of High Temperature Oxidation Resistant Titanium Alloy Arconic-THOR^TM 11005

Fusheng Sun and Ernie Crist

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111005

Open Access

Deformation and fracture behavior of new strain-transformable titanium alloys: a multi-scale investigation 11006

Chloé VARENNE, Frédéric PRIMA, Cédrik BROZEK, Julie BOURGON, Jacques BESSON and Anne-Françoise GOURGUES-LORENZON

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111006

Open Access

High-Stress Compressive Creep Behavior of Ti-6Al-4V ELI Alloys with Different Microstructures 11007

Zhenhua Dan, Jiafei Lu, Hui Chang, Ping Qu, Aifeng Zhang, Zhigang Fang, Yuecheng Dong, Ying Wang and Lian Zhou

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111007

Open Access

Forecast of the fatigue crack initiation site of commercially pure Titanium miniature specimens with local surface topography data 11008

L. Böhme, F. Ströer, A. Keksel, J. Seewig and E. Kerscher

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111008

Open Access

Local lattice strain around alloying element and martensitic transformation in titanium alloys 11009

M. Morinaga, H. Yukawa and M. Yoshino

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111009

Open Access

Surface engineering of titanium by multi-interstitial diffusion using plasma processing 11010

M. Drouet, L. Pichon, J.B. Dubois, E. Le Bourhis and T. L. Christiansen

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111010

Open Access

Mechanical behaviour and microstructural evolution in fine grain Ti-6Al-4V alloy under superplastic conditions 11011

Laurie Despax, Vanessa Vidal, Denis Delagnes, Moukrane Dehmas, Hiroaki Matsumoto and Vincent Velay

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111011

Open Access

Effect of Stress Ratio and Notch on Fatigue Strength of Commercial Pure Titanium 11012

IWATA Toshiaki

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111012

Open Access

A study on the micromechanical behavior of Ti-55531 titanium alloy with lamellar microstructure by in-situ neutron diffraction 11013

Yimin Cui, Chaohua Li, Stefanus Harjo, Changsheng Zhang, Runguang Li, Weiwei Zheng and Yandong Wang

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111013

Open Access

Design and development of a dual-phase TRIP-TWIP alloy for enhanced mechanical properties 11014

Lola Lilensten, Yolaine Danard, Fan Sun, Philippe Vermaut, Loïc Perrière, Jean-Marc Joubert and Frédéric Prima

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111014

Open Access

Quantitative relationship between microstructural factors and fatigue life of Ti-5Al-2Sn-2Zr-4Cr-4 Mo (Ti-17) fabricated using a 1500-ton forging simulator 11015

M. Niinomi, T. Akahori, M. Nakai, Y. Koizumi, A. Chiba, T. Nakano, T. Kakeshita, Y. Yamabe-Mitarai, S. Kuroda, N. Motohashi et al. (2 more)

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111015

Open Access

Extremely rapid age hardening behavior in solution treated Ti-5Al-2Fe-3Mo 11016

Tomonori KUNIEDA, Hideki FUJII and Kazuhiro TAKAHASHIa

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111016

Open Access

Study on edge cracking of titanium cold rolled sheet 11017

Hyunseok lee and Miseon Choi

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111017

Open Access

Vacuum superplastic deformation behavior of a near-alpha titanium alloy TA32 11018

Chao Cheng, Weitang Zhang, Zhiyong Chen, Liang Jin and Qingjiang Wang

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111018

Open Access

Effect of cross-sectional area reduction rate and alloy composition on the formation of <001>-fiber texture in Ti-Mo-Al-Zr alloy wire 11019

Yuri Shinohara, Yoshiki matsumoto, Masaki Tahara, Hideki Hosoda and Tomonari Inamura

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111019

Open Access

Transformations, Recrystallization, Microtexture and Plasticity in Titanium Alloys 11020

Shanoob Balachandran, Abhishek Tripathi, Arunima Banerjee, Manaswini Chinara, Ravi Teja, S.J. Suresha, Deep Choudhuri, Rajarshi Banerjee and Dipankar Banerjee

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111020

Open Access

Influence of microtexture on ultrasonic reflection in Ti-6Al-4V alloy hot-forged in α+β region 11021

Yoshinori Ito, Hiroyuki Takamatsu, Shogo Saeki and Nobuhiro Tsuji

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111021

Open Access

Change of microstructure and properties of dual titanium alloy join interface in hot working history 11022

YAO Zekun, NING Yongquan, ZHAO Zhanglong, HUANG Darong and GUO Hongzhen

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111022

Open Access

Experimental study of the superplastic and hot deformation mechanisms of a Ti-6Al-2Sn-4Zr-2Mo Titanium Alloy 11023

Gen YAMANE, Felantsoa AVOTRINIAINA, Hiroyuki IMAI, Longqiu SONG, Vanessa VIDAL, Hiroaki MATSUMOTO and Vincent VELAY

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111023

Open Access

Mechanical properties and deformation mechanisms in microscale Ti-55531 alloy 11024

Wenjuan Kou, Qiaoyan Sun, Lin Xiao and Jun Sun

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111024

Open Access

The effect of loading direction on the dwell fatigue properties of Ti-6Al-4V forged bar with highly oriented texture 11025

Kenichi Mori, Shohtaroh Hashimoto, Toshiyuki Okui, Yoshihisa Shirai and Mitsuo Miyahara

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111025

Open Access

Thermal Stability of Titanium Alloy VT8M-1 with Ultrafine-Grained Structure 11026

A.G. Stotskiy, A.V. Polyakov, G.S. Dyakonov and I.P. Semenova

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111026

Open Access

Comparison of different titanium alloys welded by Yb:YAG fibre laser for thin sheet applications used for T-ducts in bleed air systems 11027

Stefan Riekehr, Volker Ventzke, Sabine Wagner, Werner Beck and Nikolai Kashaev

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111027

Open Access

Structure and Properties of Layered Ti-6Al-4V-Based Materials Fabricated Using Blended Elemental Powder Metallurgy 11028

S.V. Prikhodko, O.M. Ivasishin, P.E. Markovsky, D.G. Savvakin and O.O. Stasiuk

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111028

Open Access

Study on Microstructure and Mechanical Properties of Low Cost Ti-Fe-B Alloy 11029

Yangyang Sun, Hui Chang, Zhigang Fang, Yuecheng Dong, Zhenhua Dan, Yanhua Guo and Lian Zhou

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111029

Open Access

Effect of morphology of primary a on fatigue crack propagation resistance in a near a heat resistant Titanium alloy 11030

Y. Sumi, H. Takabayashi, Hangyue Y. Li and P. Bowen

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111030

Open Access

PRELIMINARY INVESTIGATION OF BILLET PROCESSING ROUTE ON MICROSTRUCTURE, TEXTURE AND FATIGUE RESPONSE OF Ti834 FORGED DISC PRODUCTS 11031

B. Fernandez-Silva, B. P. Wynne, M. Jackson, M. Bodie and K. Fox

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111031

Open Access

Effects of Heat Treatment on Mechanical Properties and Microstructure Evolutions of Ti-5321 Alloy 11032

Jingzhe Niu, Yulei Gub, Yanhua Guo, Wenjun Wuc, Cong Wu, Shewei Xinc, Hui Changb and Lian Zhou

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111032

Open Access

Study on impact properties of Ti6211 titanium alloy at different temperatures 11033

Yanwen Tian, Fang Hao, Enen Xu and Junqi Du

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111033

Open Access

Experimental investigations for a postweld heat treatment on Ti-6Al-4V titanium welds with a defocused laser beam 11034

J.D. Beguin, Y. Balcaen, J. Alexis and E. Andrieu

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111034

Open Access

TEM observation of precipitates and their role to mechanical properties in Ti-5553 alloy heated to some temperatures up to 923 K 11035

E. Sukedai, E. Aeby-Gautier and M. Dehmas

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111035

Open Access

Electron Beam Cold Hearth Melted Titanium Alloys and the Possibility of Their Use as Anti-Ballistic Materials 11036

P.E. Markovsky, V.I. Bondarchuk, S.V. Akhonin and A.V. Berezos

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111036

Open Access

In-situ characterization of growth of isothermal ω phase in metastable β-Ti alloy TIMETAL LCB 11037

J. Nejezchlebova, L. Bodnarova, M. Janovska, P. Sedlak, H. Seiner, J. Smilauerova, M. Janecek and B. Appolaire

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111037

Open Access

Fine-tuning of stress-induced martensite in TRIP/TWIP Ti alloys 11038

Bingnan QIAN, Fan SUN, Philippe VERMAUT and Frédéric PRIMA

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111038

Open Access

Understanding strain localisation behaviour in a near-α Ti-alloy during initial loading below the yield stress 11039

Claudius Dichtl, David Lunt, Rhys Thomas, Michael Atkinson, Matthew Thomas, Dave Rugg, Rebecca Sandala, Joao Quinta da Fonseca and Michael Preuss

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111039

Open Access

Early slip activity and fatigue crack initiation of a near alpha titanium alloy 11040

Conghui Liu, Rhys Thomas, João Quinta da Fonseca and Michael Preuss

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111040

Open Access

Ti‐6Al‐2Sn‐2Zr‐2Mo‐2Cr Alloy for High Strength Aerospace Fasteners 11041

Sesh A. Tamirisakandala and Manish Kamal

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111041

Open Access

A Review of Hydride Precipitates in Titanium and Zirconium Alloys: Precipitation, Dissolution and Crystallographic Orientation Relationships 11042

Egle CONFORTO and Xavier FEAUGAS

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111042

Open Access

Alloy Development and Optimisation Informed by an Understanding of Cold Dwell Fatigue Sensitivity 11043

M.R. Bache and M. Thomas

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111043

Open Access

Fatigue Performance of the Novel Titanium Alloy TIMETAL^®407 11044

W. Davey, M.R. Bache, H.M. Davies, M. Thomas and I. Bermant-Parr

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111044

Open Access

A Comparative Study on the Substructure Evolution and Mechanical Properties of TIMETAL^® 407 and Ti-64 11045

Zachary Kloenne, Gopal Viswanathan, Matt Thomas, M.H. Lorreto and Hamish L. Fraser

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111045

Open Access

Effect of Heat treatment on Microstructure and Mechanical Properties of Ti-6Al-2Zr-1Mo-1V Bar 11046

Xu Enen, Tian Yanwen, Hao Fang, Cu Linin, Du Yuxuan, Lei Jinwen and Ju Biao

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111046

Open Access

Effect of normal annealing and solution temperature on the microstructure and properties of TC4 bar 11047

YANG Nan, REN Yong, CUI Linlin, JU Biao, LEI Jinwen and LI Shaoqiang

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111047

Open Access

Influence of Microstructures on Tensile Properties at 400℃ of TC4 Titanium Alloy 11048

Ren Yong, Yang Nan, Lei Jinwen, Li Shaoqiang and Du Yuxuan

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111048

Open Access

Significantly fast spinodal decomposition and inhomogeneous nanoscale martensitic transformation in Ti–Nb–O alloys 11049

Yuya ISHIGURO, Yuhki TSUKADA and Toshiyuki KOYAMA

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111049

Open Access

Effects of Mo segregation on Charpy absorbed energy in Ti-12Mo alloys 11050

Satoshi Emura, Xin Ji, Xiaohua Min and Koichi Tsuchiya

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111050

Open Access

Assessment of 3D Short Crack Closure in Ti-6Al-4V Alloy Utilizing Synchrotron X-ray Microtomography 11051

Valary TUBEI, Meysam HASSANIPOUR, Kyosuke HIRAYAMA, Hiroyuki TODA, Akihisa TAKEUCHI and Kentaro UESUGI

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111051

Open Access

The Nature of the β→α″ Transformation in Ti-Nb Alloys 11052

E.M. Hildyard, L.D. Connor, N. Martin, D. Rugg, H.J. Stone and N.G. Jones

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111052

Open Access

In-situ EBSD characterization of deformation behavior of primary alpha phase in Ti-6Al-4V 11053

Wansong Li, Shigeto Yamasaki, Masatoshi Mitsuhara and Hideharu Nakashima

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111053

Open Access

Local Fatigue Crack Propagation Resistance Relevant To Microstructure Uniquely Developed In A Friction Stirred Ti-6Al-4V Alloy Joint 11054

M. Okazaki, M. Muzvidziwa and S. Hirano

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111054

Open Access

Effect of microstructure on fatigue crack propagation in a titanium-aluminide alloy under thermomechanical fatigue conditions - Current activities in the subcommittee of Titanium-Aluminide alloys in the Society of Materials Science, Japan (JSMS) - 11055

Yasuhiro Yamazaki, Ryota Sugaya and Fumio Tooyama

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111055

Open Access

Strain-hardenability of new strengthened TRIP/TWIP titanium alloys 11056

Y. Danard, L. Lilensten, F. Sun, P. Vermaut, I. Freiherr Von Thüngen, G. Martin, N. Bozzolo and F. Prima

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111056

Open Access

Study on Microstructure and Mechanical Properties of Powder Metallurgy TA15 Titanium Alloy 11057

Zhiyong Zhang, Yafei Ren, Kun Shi, Hongyu Liu, Shibing Liu and Jun Zhao

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111057

Open Access

The influence of ternary and quaternary alloy additions on the superelastic behaviour of metastable Ti-Nb based alloys 11058

N. G. Jones, E. M. Hildyard and L. D. Connor

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111058

Open Access

Deformation mechanisms and effect of oxygen addition on mechanical properties of Ti-7.5Mo alloy with α” martensite 11059

Xin Ji, Ivan Gutierrez-Urrutia, Satoshi Emura and Koichi Tsuchiya

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111059

Open Access

Thermal Stability and Recrystallization of Titanium Grade 4 with Ultrafine-Grained Structure 11060

Grigory Dyakonov, Sergey Mironov, Tatyana Yakovleva and Irina Semenova

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111060

Open Access

Yb: YAG laser welding of Ti6Al4V sheet using conventional and annular power density distribution: microstructure mechanical properties relationship 11061

J.-D. Béguin, Y. Balcaen, J. Alexis, V. Gazagne and E. Andrieu

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111061

Open Access

Towards work-hardenability of Ti-6Al-4V through a quenching and partitioning approach 11062

O. Dumas, B. Hary, G. Martin, F. Sun, C. de Formanoir, F. Prima and S. Godet

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111062

Open Access

Interactions between microstructure and fatigue crack growth in αβ titanium alloy 11063

Vincent Renon, Gilbert Henaff, Céline Larignon, Simon Perusin and Patrick Villechaise

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111063

Open Access

Microstructural evolution and Mechanical Properties of a Newly Developed Ti2AlNb-based alloy 11064

Yongsheng HE, Wenzhong LUO, Yujun DU, Ming WU, Kaixuan Wang, Xianghong LIU and Rui HU

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111064

Open Access

Effect of Stress Ratio(R) and Stress Concentration Factor (Kt) on Fatigue Properties of WSTi6211 Titanium Alloy 11065

Hao Fang, Feng Yong, Du Yuxuan, Wang Yue, Xu Enen, Wang Kaixuan and Tian Yanwen

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111065

Open Access

Impact of Microstrucutre on Dwell Fatigue in Dual-Phase Titanium Alloys 11066

Michelle Harr, Adam Pilchak and Samantha Daly

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111066

Open Access

Some data on the influence of structure and chemical composition on the ratio of fracture toughness and tensile brittleness of titanium alloys 11067

A. Volkov, M. Leder, A. Grebenshchikov, N. Volkova and E. Shushakova

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111067

Open Access

Study of oxygen content in titanium alloys after exposure at elevated temperature 11068

M. Kalienko, A. Volkov, M. Leder and A. Zhelnina

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111068

Open Access

Coexistence of multi-deformation modes in beta Ti alloys with improved yielding strength and ductility 11069

Guanfang Chen, Jinyong Zhang, Yangyang Fu, Zheng Chen, Fan Sun and Ju Li

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111069

Open Access

TRIP Titanium Alloy Design 11070

Fan Meng, Jia-Yi Yan and Gregory B Olson

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111070

Open Access

The rupture life prediction in cold dwell fatigue of Ti-6Al-4V based on the creep deformation 11071

Yutaro Ota, Tomomichi Ozaki and Keiji Kubushiro.O

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111071

Open Access

Influence of microstructure evolution during thermal aging on tensile properties of β-type Ti-12V-2Fe-Al alloy 11072

Weilin Wang, Xianbing Zhang and Jian Sun

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111072

Open Access

Development of α - β type titanium alloy Ti-4.5Al-2.5Cr-1.2Fe-0.1C-0.3Cu-0.3Ni having good forgeability and machinability 11073

Takashi KONNO, Keitaro TAMURA, Yoshio ITSUMI, Kohei YOKOCHI, Koichi AKAZAWA, Hideto OYAMA and Takashi CHODA

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111073

Open Access

Deformation processes near a crack initiation site under dwell-fatigue loading of Ti-6Al-4V 11074

C. Lavogiez, S. Hémery and P. Villechaise

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111074

Open Access

Dislocation interactions in near-alpha Titanium alloy Ti6242Si under LCF 11075

Sudha Joseph, Trevor C. Lindley and David Dye

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111075

Open Access

Modeling and Verification of Stress Relaxation Behavior of Ti-6Al-4V 11076

Xingzhen Zhang, Ying Deng, Tian Liang, Shihan Jin and Weidong Li

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111076

Open Access

Machinability of cast titanium alloy Ti-6Al-4V with addition of boron 11077

Stefan Cedergren and Robert Pederson

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111077

Open Access

Multi-strengthening-mechanisms in a novel titanium alloy with (TiHf)₅Si₃ particle-reinforcement 11078

Yan Du, Jinwen Lu, Wei Zhang and Yusheng Zhang

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111078

Open Access

Cyclic creep behaviour of two-phase Ti-6Al-2Mo-2Cr alloy 11079

Waldemar Ziaja, Maciej Motyka, Krzysztof Kubiak and Jan Sieniawski

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111079

Open Access

Why titanium alloys withstand more strain under dwell-fatigue than under fatigue? 11080

S. Hémery, A. Naït-Ali, C. Lavogiez and P. Villechaise

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111080

Open Access

Optimization of shot peening for titanium alloys Ti 10-2-3 in CONDOR project 11081

Corentin DIDES, Thomas BILLOT and Nicolas GUILLEMOT

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111081

Open Access

Deformation behaviour of beta phase with similar chemical composition in beta and alpha+beta titanium alloys 11082

Xin Xu, Ioannis Bantounas and David Dye

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111082

Open Access

Predicting the tensile properties of additively manufactured Ti-6Al-4V via electron beam deposition 11083

Thomas Ales, Iman Ghamarian, Brian Hayes, Brian Welk, Andrew Baker, Matthew Kenney, D Gary Harlow, Hamish Fraser, Wenqi Li and Peter Collins

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111083

Open Access

Recognition and Quantification of Dual Phase Titanium Alloy Microstructures Using Convolutional Neural Networks 11084

Ryan Noraas, Vasisht Venkatesh, Luke Rettberg and Nagendra Somanath

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111084

Open Access

The fracture behavior transitions in cold dwell fatigue of Ti-6Al-4V 11085

Tomomichi Ozaki, Yutaro Ota, Keiji Kubushiro and Kokichi Sano

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111085

Open Access

Effects of cold tandem rolling on microstructures and mechanical properties of TC16 titanium alloy wire for fastener use 11086

SUN Xiaoping, HOU Fengqi, YANG Hui, Wang Kaixuan and LIU Xianghong

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111086

Open Access

Plastic deformation of beta-Ti-Mo alloys with isothermal omega phase 11087

Koichi Tsuchiya, Satoshi Emura, Xin Ji, Ivan Gutierrez and Toru Hara

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111087

Open Access

Study on the pack rolling process factor of Ti-6Al-4V alloy 11088

Miseon Choi and Hyunseok Lee

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111088

Open Access

Titanium alloy Ti-6242 for high temperature structural application. Static and dynamic mechanical properties and impact of ageing 11089

Bertrand MAX, Joël ALEXIS, Céline LARIGNON and Simon PERUSIN

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111089

Open Access

Stress partitioning in a near-β Titanium alloy induced by elastic and plastic phase anisotropies: experimental and modeling 11090

Ravi raj purohit PURUSHOTTAM RAJ PUROHIT, Safaa LHADI, Nathalie GEY, Olivier CASTELNAU, Thiebaud RICHETON, Lionel GERMAIN and Stephane BERBENNI

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111090

Open Access

Data Driven Tools and Methods for Microtexture Classification and Dwell Fatigue Life Prediction in Dual Phase Titanium Alloys 11091

V. Venkatesh, R. Noraas, A. Pilchak, S. Tamirisa, K. Calvert, A. Salem, T. Broderick, M.G. Glavicic, I. Dempster and V. Saraf

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111091

Open Access

Twinnability of Ti-V Binary Alloys: Simulation and Experiment 11092

H. Xing, A.P. Dong and J. Huang

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111092

Open Access

Advanced Titanium Alloy Fatigue Modeling 11093

Michael G. Glavicic, Tom Broderick, Vasisht Venkatesh, Iuliana Cernatescu, Daira Legzdina, Fatmata Barrie, Elizabeth Burns, Ian Demptster, Vikas Saraf, Kayla Calvert et al. (7 more)

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111093

Open Access

Mechanisms of oxide dependent tribological behavior in Ti / Steel sliding and influence of nanostructured surfaces 11094

Pierre Maurel, Laurent Weiss, Philippe Bocher, Eric Fleury and Thierry Grosdidier

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111094

Open Access

GAS NITRIDING INFLUENCE ON FATIGUE AND CREEP BEHAVIORS IN TITANIUM GRADE 2 11095

Palma, KMS, Perina GB, Velloso VMO, Baptista, CARP and Barboza, MJR

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111095

Open Access

Orientation mapping of cp-Ti by reflected polarized light microscopy 11096

Lucia Morales-Rivas, Luisa Böhme and Eberhard Kerscher

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032111096

Microstructure Evolution

Open Access

Exploration of Nano-scale Structural Instabilities in Metastable β Titanium Alloys Using Advanced Electron Microscopy 12001

Yufeng Zheng, Dong Wang, Rajarshi Banerjee, Dipankar Banerjee, Yunzhi Wang and Hamish L. Fraser

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112001

Open Access

Strengthening of Ti-6Al-7Nb alloy by high-pressure torsion processing 12002

M. Ashida, P. Chen, Y. Tsutsumi, T. Hanawa and Z. Horita

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112002

Open Access

Effect of adiabatic heating on microstructure evolution in Ti-6Al-4V during high strain rate forging 12003

Mykola Kulakov, Laurie Da Silva and Aurik Andreu

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112003

Open Access

MICROSTRUCTURAL EVOLUTIONS AND MECHANICAL PROPERTIES DURING LONG-TERM AGEING OF TITANIUM ALLOY Ti-17 12004

Nicolas Maury, Moukrane Dehmas, Claude Archambeau-Mirguet, Jérôme Delfosse and Elisabeth Aeby-Gautier

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112004

Open Access

Phase transformation during continuous heating in a β-quenched Ti-5Al-3Mo-3V-2Cr-2Zr-1Nb-1Fe alloy 12005

Cong Wu, Yongqing Zhao, Qiaoyan Sun and Lian Zhou

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112005

Open Access

Microstructure formation during thermomechanical processing in Ti-17 alloy 12006

Elango Chandiran, Goro Miyamoto and Tadashi Furuhara

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112006

Open Access

Characterizing and Modeling the Precursors to Coarse Grain Formation during Beta-Annealing of Ti-6Al-4V 12007

A.L. Pilchak, S. Srivatsa, N.C. Levkulich, V. Sinha, E.J. Payton and S.L. Semiatin

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112007

Open Access

Dynamic recrystallization behavior of the Ta-containing TiAl alloy in isothermal deformation 12008

Y.Y. Luo, X.N. Mao, H.Y. Yang, Y.F. Yin, Z.Z. Zhao and D.Z. Guo

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112008

Open Access

Observation of the microstructure of the metastable Ti15Mo alloy after ageing 12009

M. Janeček, K. Bartha, M. Cieslar, P. Minárik and J. Stráský

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112009

Open Access

Investigation of phase transformation in Fe microalloyed Ti6Al4V alloy during continuous heating process 12010

Changliang Wang, Feng Li, Can Ding, Hui Chang and Lian Zhou

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112010

Open Access

Development of CALPHAD database for both Ti- and TiAl-based alloys 12011

Yang Yang, Hai-Lin Chen, Qing Chen and Anders Engström

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112011

Open Access

Elastic constants of Ti-15Mo single crystals and their evolution with thermal treatment 12012

M. Janovskaa, J. Nejezchlebova, P. Sedlak, T. Grabec, P. Stoklasova, J. Smilauerova, M. Janecek, S. Kratky and H. Seiner

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112012

Open Access

In-situ measurement of the β to α phase transformation kinetics in a Ti-5553 alloy using laser ultrasonics 12013

M. C. M. Rodrigues, T. Garcin and M. Militzer

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112013

Open Access

Effect of microstructure on Ti₃Al precipitation during ageing of Ti-6Al-4V alloy 12014

B. Callegari, J. V. Marçola, K. Aristizabal, F. A. Soldera, F. Mücklich and H. C. Pinto

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112014

Open Access

STRAIN INDUCED PHASE TRANSFORMATION IN Ti-15Mo β ALLOY 12015

Xiaoming Wang and Bernard Li

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112015

Open Access

Evolution of microstructure and mechanical properties of Ti-based metal-matrix composites during hot deformation 12016

S. Zherebtsov, M. Ozerov, M. Klimova, D. Klimenko, V. Sokolovsky and N. Stepanov

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112016

Open Access

Generation of Microstructural Gradients for Improved Mechanical Properties via Thermo-Hydrogen Treatment of the Metastable Beta Titanium Alloys Beta C^TM and Ti 10V-2Fe-3Al 12017

Christopher David Schmidt, Vitali Macin, Peter Schmidt and Hans-Jürgen Christ

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112017

Open Access

Micromechanical behaviors related to confined deformation in pure titanium 12018

Runguang Li, Youkang Wang, Xiaojing Liu, Shilei Li, Qing Tan, Wenjun Liu, Xing Fang and Yan-Dong Wang

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112018

Open Access

Effect of microstructure and cooling rate on the fatigue performance of TIMETAL^® 575 12019

M. Bodie, M. Thomas and A. Ayub

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112019

Open Access

The Difference between Hot and Cold Deformation and its Effect on Microstructure and Mechanical Properties of Near Beta Titanium Alloy 12020

A.S. Grebenchshikov, M.O. Leder and A.V. Volkov

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112020

Open Access

Microstructure-twinning relations in beta-Ti alloys 12021

Ivan Gutierrez-Urrutia, Xin Ji, Satoshi Emura and Koichi Tsuchiya

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112021

Open Access

Study of harmonic microstructure development during Spark Plasma Sintering (SPS) of β-CEZ titanium alloy 12022

Benoît Denand, Bhupendra Sharma, Guillaume Geandier, Guy Dirras, Kei Ameyama, Yudong Zhang and Elisabeth Aeby-Gautier

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112022

Open Access

Decomposition of the β phase at intermediate temperature in β-metastable Ti-5553 alloy 12024

Morgan Goetz, Moukrane Dehmas, Benoît Appolaire, Elisabeth Aeby-Gautier, Sandra Andrieu and Thomas Billot

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112024

Open Access

Nano-scale characterisation of tri-modal microstructures in TIMETAL^® 575 12025

Enrique Frutos-Myro, Ian MacLaren, Peifeng Li, Iain Berment-Parr and Mathew Thomas

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112025

Open Access

Phase field modeling of deformation twinning in β-metastable titanium alloys 12026

Juba HAMMA, Benoît APPOLAIRE, Yann LE BOUAR and Alphonse FINEL

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112026

Open Access

Evolution of distance between ω particles in metastable β-Ti alloy determined from in-situ small angle neutron scattering 12027

Pavel Zháňal, Vasyl Ryukhtin, Gergely Farkas, Peter Kadletz, Uwe Keiderling, Dirk Wallacher and Petr Harcuba

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112027

Open Access

Flow modelling of Ti6Al4V under large strains 12028

HOGREFE Katharina, BUZOLIN Ricardo and POLETTI María Cecilia

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112028

Open Access

Ti-15Mo alloy prepared by cryogenic milling and spark plasma sintering 12029

A. Terynková, J. Kozlík, K. Bartha, T. Chráska and J. Stráský

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112029

Open Access

Microstructure and texture in cryomilled and spark plasma sintered Ti Grade 2 12030

Jiří Kozlík, Josef Stráský, Petr Harcuba, Tomáš Chráska and Miloš Janeček

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112030

Open Access

Ultrafine grain recrystallisation of a metastable-β Ti-alloy via conventional thermomechanical processing 12031

A.J. Edwards, P. Vermaut, I. Guillot and F. Prima

Published online: 19 March 2021

DOI: https://doi.org/10.1051/matecconf/202032112031

Open Access

Further Research on Hardenability of Ti-1023 β Alloy Leading to a New DOE 12032

Bohumil Prazak

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112032

Open Access

Effect of oxygen addition on the formation of isothermal ω phase in Ti-Fe alloys 12033

Sengo Kobayashi, Shota Sasaki, Sota Kawano, Renta Sasaki and Satoshi Okano

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112033

Open Access

The effect of plastic deformation on martensite decomposition process in Ti-6Al-4V alloy 12034

Maciej Motyka, Waldemar Ziaja, Anna Baran-Sadleja and Karol Slemp

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112034

Open Access

Ultrasonic velocity variation of Ti6Al4V Ti-alloy bars under conventional forging combined with triple heat treatment 12035

Feixiao Han, Fengqi Hou, Xiaoping Sun, Zhixia Liu, Yonggang He and Kaixuan Wang

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112035

Open Access

Texture evolution during Isothermal compression process of Ti-22Al-25Nb alloy in B2 phase region 12036

Haoyuan Ma, Weidong Zeng, Xiongxiong Gao and Youping Zheng

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112036

Open Access

Direct Evidence for Dynamic Phase Transformation during High Temperature Deformation in Ti-64 12037

Christopher S. Daniel, Chi-Toan Nguyen, Michael D. Atkinson and João Quinta da Fonseca

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112037

Open Access

Phase transformation sequence of Ti-6Al-4V as a function of the cooling rate 12038

BUZOLIN Ricardo, WEISS Desirée, KRUMPHALS Alfred, LASNIK Michael and POLETTI Maria Cecilia

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112038

Open Access

Evolution of α phase in metastable β titanium alloys studied by small-angle X-ray scattering 12039

Jana Šmilauerová, Petr Harcuba, Josef Stráský, Jitka Stráská, Miloš Janeček, Jan Ilavský and Václav Holý

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112039

Open Access

Criteria for fast and selective α precipitation at β grain boundaries in Ti-alloys Consequence for in-service microstructures 12040

Tao Liu, Lionel Germain, Julien Teixeira, Elisabeth Aeby-Gautier and Nathalie Gey

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112040

Open Access

Phase separation and up-hill diffusion in the ordered α2 compound of a γ- Ti-Al-Nb alloy 12041

Heike Gabrisch, Tobias Krekeler, Uwe Lorenz, Marcus Willi Rackel, Martin Ritter, Florian Pyczak and Andreas Stark

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112041

Open Access

Origins and importance of fine secondary α in slowly cooled Ti6Al4V 12042

M. Wang, Y. Lu, B. Pang, Z. T. Kloenne, H. L. Fraser, Y. L. Chiu and M. H. Loretto

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112042

Open Access

Analysis of the Development of Abnormal Grains Structures During Beta Annealing of Ti-64 Wrought Products 12043

Nicholas E. Byres, João Quinta da Fonseca, Benjamin Dod, Jack Donoghue, Alec Davis and Phillip B. Prangnell

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112043

Open Access

Gaseous thermochemical synthesis and characterization of mixed interstitial phases in the Ti-C-O system 12044

Frederik Bojsen Kværndrup, Kristian V. Dahl, Kenny Ståhl, Marcel A.J. Somers, Grethe Winther and Thomas L. Christiansen

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112044

Open Access

Effect of mechanical surface treatments on the high temperature oxidation of pure titanium: the role of nitrogen 12045

L. Lavisse, A. Kanjer, P. Berger, P. Peyre, C. Gorny, M. François, V. Optasanu, T. Montesin and M. C. Marco de Lucas

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032112045

Wrought Processing and Fabrication

Open Access

Thermomechanical process route to achieve high fracture toughness in Ti-17 forgings for high temperature applications 13001

Mario Balzer and Thomas Witulski

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032113001

Open Access

The effect of Titanium Alloy Composition and Tool Coating on Drilling Machinability 13002

Alex Graves, Maria Teike, Susanne Norgr, Pete Crawforth and Marun Jackson

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032113002

Open Access

Effect of strain rate on α-lath thickness of TC17 alloy after deformation and subsequent heat treatment 13003

Zimin Lu, Jiao Luo and Miaoquan Li

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032113003

Open Access

Development of Porous Titanium Sheet with High Porosity and Good Mechanical Properties 13004

Yasuhiko Goto, Yosuke Inoue, Hideki Fujii and Matsuhide Horikawa

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032113004

Open Access

Macro-mesoscale microstructural evolution modeling under hot forging of a Ti-17 alloy with a lamellar (α+β) starting microstructure 13005

Hiroaki Matsumoto, Kenta Yamanaka, Akihiko Chiba, Yoko Yamabe-Mitarai and Yoshio Itsumi

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032113005

Open Access

Phase transformation and evolution of dislocation structure in the β phase of Ti-17 alloy during hot deformation 13006

K. Yamanaka, M. Mori, H. Matsumoto and A. Chiba

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032113006

Open Access

Microstructure-Property Relationships in Cold Rollable, High-Strength α/β Alloys 13007

John W. Foltz

Published online: 12 October 2020

DOI: https://doi.org/10.1051/matecconf/202032113007

MATEC Web of Conferences

Volume 321 (2020)

The 14th World Conference on Titanium (Ti 2019)

Statement of Peer review

Preface 00001

Plenary Lectures

Current Situation of Titanium Research, Development and Applications in China 01001

New research and development of titanium production and application in the CIS 01002

Developments in Titanium Research and Applications in Germany 01003

Recent activities of titanium research and development in Japan 01004

Titanium in France: research activities, industrial developments and applications 01005

Titanium Research Developments in the United Kingdom 01006

RECENT ADVANCES IN TITANIUM TECHNOLOGY IN THE UNITED STATES 01007

Keynote Lectures

Titanium in Shipbuilding and Other Technical Applications 02001

Progress and status in wrought processing of titanium alloys 02002

Application of Titanium and its Alloys for Automobile Parts 02003

Recent Studies and Developments in Titanium Biomaterials 02004

Advances and Breakthroughs in Titanium forgings for critical structural parts 02005

Exploitation of field assisted sintering technology (FAST) for titanium alloys 02006

Opportunities and Challenges for the Industrial Titanium Market 02007

Additive and Near Net Shape Manufacturing

Study on the origins of residual stresses in Ti-6Al-4V processed by additive manufacturing 03001

Study of Arc-wire and Laser-wire processes for the realization of Ti-6Al-4V alloy parts 03002

The uses and applications of hydrogen processing for titanium additive manufacturing 03003

Machine Learning for Competitive Grain Growth Behavior in Additive Manufacturing Ti6Al4V 03004

The influence of microstructure on mechanical properties of SLM 3D printed Ti-6Al-4V 03005

HIGH TEMPERATURE OXIDATION OF TI-6AL-4V ALLOY FABRICATED BY ADDITIVE MANUFACTURING. INFLUENCE ON MECHANICAL PROPERTIES 03006

Impact of process parameters and heat treatment on mechanical properties of Ti64 LBM 03007

Microscopic strain localisation in WAAM Ti-6Al-4V during uniaxial tensile loading 03008

Hydride Approach in Blended Elemental Powder Metallurgy of Beta Titanium Alloys 03009

FAST-forge of novel Ti-6Al-4V/Ti-6Al-2Sn-4Zr-2Mo bonded, near net shape forgings from surplus AM powder 03010

An Overview of Cold Spray Additive Technology in Australia for Melt-less Manufacture of Titanium 03011

Qualification of Customised Medical Implants Produced by Ti6Al4V(ELI) Additive Manufacturing 03012

Topology optimisation of an aircraft nose-wheel fork for production in Ti6Al4V by the Aeroswift high-speed laser powder bed fusion machine 03013

Microstructure and Properties of 3D Ti-6Al-4V Articles Produced with Advanced Co-axial Electron Beam & Wire Additive Manufacturing Technology 03014

On the advances to obtain excellent and repeatable mechanical properties and build quality of LaserForm® Ti gr23 (A) across whole build platform 03015

Effect of Manufacturing Process of Master Alloy Powders on Homogeneity of Sintered Ti-5Al-1Fe by Blended Elemental Powder Metallurgy 03016

Repairing Ti-6Al-4V aeronautical components with DED additive manufacturing 03017

Titanium Ti6Al4V alloy reinforced by the addition of nano yttria stabilized zirconia fabricated by selective additive manufacturing: microstructure and mechanical investigations 03018

Microstructure development in Laser Metal Deposition of Ti-5553 03019

Direct Laser Additive Manufacturing of TiAl Intermetallic Compound by Powder Directed Energy Deposition (DED) 03020

Texture of electron beam melted Ti-6Al-4V measured with neutron diffraction 03021

LINEAR FRICTION WELDING – PROCESS DEVELOPMENT AND APPLICATIONS IN AEROSPACE INDUSTRY 03022

Microstructural Stability of Ti based Composites Fabricated by Spark Plasma Sintering 03023

Process variation in Selective Laser Melting of Ti-6Al-4V alloy 03024

SERIES PARTS MANUFACTURING BY INFRARED SUPERPLASTIC FORMING WITH NUMERICAL TECHNIQUES FOR THERMAL REGULATION 03025

In situ synchrotron X-ray diffraction line-profile analysis of additively manufactured Ti−6Al−4V alloy under tensile deformation 03026

Effect of Heat Treatments on Fatigue Properties of Ti-6Al-4V Alloy Fabricated by EBM Additive Manufacturing 03027

Recycling of titanium alloy swarf directly into wire using the ConformTM continuous extrusion process 03028

X-ray Micro Tomography Study of Internal Defects of Electron Beam Melted Ti6Al4V and Their Effect on Fatigue Behavior 03029

An innovative method to assess and manage residual stresses in additively manufactured titanium 03030

Ti-6Al-4V microstructural orientation at different length scales as a function of scanning strategies in Electron Beam Melting in additive manufacturing 03031

From the fatigue properties of Ti6Al4V produced by ALM selective laser melting process to the mechanical design of an aeronautical part 03032

Development of constitutive equations for hot working of titanium matrix composites 03033

Laser polishing of titanium surfaces obtained by additive manufacturing process 03034

An experimental study of Ti-6Al-4V powder reactivity in gaseous environment: Application to additive manufacturing 03035

Numerical simulation of Rapid Additive Forging (RAF) process 03036

Influence of wire arc additive manufacturing of Ti-6Al-4V on microstructure and mechanical properties for potential large-scale aviation parts 03037

Aerospace Applications

Improving the high temperature oxidation resistance of Ti-β21S by mechanical surface treatment 04001

An analysis of thermo-mechanical fatigue crack growth in the titanium alloy Ti-6246 04002

The Role of Oxygen in α2 Formation in the Titanium Model Alloy Ti-7Al 04003

Micromechanical approaches to understand dwell fatigue: from titanium a-b microstructures to disc thermal alleviation 04004

Normal and dwell fatigue behavior of a near-alpha titanium alloy - IMI 834 04005

Properties of Novel High Temperature Titanium Alloys for Aerospace Applications 04006

Failure investigation as a route to improving integrity of titanium alloys in service 04007

Aerospace Titanium Alloy Melt Process Quality Improvements 04008

Effect of oxygen contents on strain rate sensitivity of commercially pure titanium 04009

Safety Evaluation for Pure Titanium by Lock-in Infrared Thermography 04010

High temperature oxidation and mechanical behavior of β21s and Ti6242S Ti-based alloys 04011

A Novel Technique to Assess the Effect of Machining and Subsurface Microstructure on the Fatigue Performance of Ti-6Al-2Sn-4Zr-6Mo 04012

Superior Oxidation Resistance Titanium Alloy ARCONIC-THORTM for Aerospace Applications 04013

Effect of microstructure on tensile properties of Ti-17 alloys forged using a 1500-ton forging simulator 04014

Effect of Microstructure on Fatigue Properties of Several Ti-Alloys for Aerospace Application 04015

Tensile properties of α-titanium alloys at elevated temperatures 04016

Influence of soft interlayers on fretting fatigue and fretting wear resistance of Ti-6Al-4V alloy 04017

Role of refractory elements in near-alpha titanium alloys on high temperature mechanical properties 04018

LINEAR FRICTION WELDING – PROCESS CONTROL AND MACHINE TECHNOLOGY 04019

TITANIUM SHEET HOT FORMING IN THE AEROSPACE INDUSTRY 04020

The 14^th World Conference on Titanium (Ti 2019)

Recycling of titanium alloy swarf directly into wire using the Conform^TM continuous extrusion process 03028

The Role of Oxygen in α₂ Formation in the Titanium Model Alloy Ti-7Al 04003

Superior Oxidation Resistance Titanium Alloy ARCONIC-THOR^TM for Aerospace Applications 04013

Electrochemical Deoxidation of Titanium in Molten MgCl₂-HoCl₃ 07006

Influence of bath composition on Ti metal deposition in molten CaCl₂ containing calcium titanate 07010

Effect of Mo, V and Zr on the microstructure and mechanical properties of Ti₂AlNb alloys 08003