MATEC Web Conf.
Volume 321, 2020The 14th World Conference on Titanium (Ti 2019)
|Number of page(s)||4|
|Section||Microstructure - Properties Relationships|
|Published online||12 October 2020|
The rupture life prediction in cold dwell fatigue of Ti-6Al-4V based on the creep deformation
1 IHI Technology platform center, 1,Shin-nakaharacho, Isogo-ku, Yo kohama, Japan
2 IHI Asia Pacific Thailand, 11th and 12th Floor, Ramaland Building, 952 Rama IV Road, Suri yawongse, Bangrak, Bangkok 10500, Thailand
Titanium a lloys have been found that the fatigue strength of Ti alloys decreases due to cold dwell fatigue (CDF) at room temperature. Ti and Ti alloys generate creep deformation at room temperature (T/Tm = 0.15). Thus, it is considered that creep affects the reduction in fatigue life in CDF tests. This research intends to clarify the effects of long time dwell under tensile stress and rupture life prediction from the view of creep deformation in CDF characteristics of Ti-6Al-4V. Rupture cycle decreased with increase of dwell time. Additionally, lower limit of rupture life ratio “NCDF/NLCF” was defined from rupture in creep test if it was assumed that creep test was extremely long time dwell CDF test. When strain change in whole dwell time was extracted in CDF tests, strain change was like creep curves and minimum creep rate changed depending on dwell time. Minimum creep rate was calculated by the formula based on experimental results, and then rupture time was calculated by Monkman-grant relationship. All of rupture cycle predictions were in factor of 2. Therefore, rupture cycle and time can be calculated if dwell time is known in CDF tests.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.