Effect of Microstructure on Fatigue Properties of Several Ti-Alloys for Aerospace Application

A. El-Chaikh; A. Danzig; D. Muenter

doi:10.1051/matecconf/202032104015

All issues

Volume 321 (2020)

MATEC Web Conf., 321 (2020) 04015

References

Open Access

Issue		MATEC Web Conf. Volume 321, 2020 The 14^th World Conference on Titanium (Ti 2019)


Article Number		04015
Number of page(s)		13
Section		Aerospace Applications
DOI		https://doi.org/10.1051/matecconf/202032104015
Published online		12 October 2020

SAE AMS 4928, Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed [Google Scholar]
R.R. Boyer and R.D. Briggs, JMEPEG J. Mater. Eng. Perform, 14 (2005) 681-685 [CrossRef] [Google Scholar]
R.R. Boyer and G.W. Kuhlman, Metallurgical Transactions A, 18A (1987) 2095-2103 [CrossRef] [Google Scholar]
T. Wohlers, Wohlers Report, Part 2 (2019) [Google Scholar]
C. Leyens and M. Peters, WILEY-VCH Verlag GmbH & Co. KGaA, (2003) 1-36 [Google Scholar]
ASTM E466 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials (2015) [Google Scholar]
Metallic Materials Properties Development and Standardization (MMPDS), Battelle Memorial Institute (2008) [Google Scholar]
H.J. Schäfer, P. Beiss, C. Broeckmann, proceedings of Fifth International Conference on Very High Cycle Fatigue, DVM, (2011) 519-524 [Google Scholar]
G. Terlinde, H.-J. Rathjen & K.-H. Schwalbe, Metallurgical Transactions A, 19A (1988) 1037-1049 [CrossRef] [Google Scholar]
L. Wagner & J.K. Bigoney, in Titanium and Titanium Alloys, C. Leyens and M. Peters, WILEY-VCH Verlag GmbH & Co. KGaA, (2003) 153-185 [Google Scholar]
S.K. Jha, K.S. Ravi Chandran, Scripta Materialia, 48 (2003) 1207-1212 [CrossRef] [Google Scholar]
El-Chaikh, A., Schmidt, P., Christ, H.-J, Procedia Engineering, 2 (2010) 1973-1982 [CrossRef] [Google Scholar]
Simonelli, M., Tse, Y. Y. and Tuck, C., Materials Science and Engineering A. 616 (2014) 1-11 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] SAE AMS 4928, Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed [Google Scholar]

[2] R.R. Boyer and R.D. Briggs, JMEPEG J. Mater. Eng. Perform, 14 (2005) 681-685 [CrossRef] [Google Scholar]

[3] R.R. Boyer and G.W. Kuhlman, Metallurgical Transactions A, 18A (1987) 2095-2103 [CrossRef] [Google Scholar]

[4] T. Wohlers, Wohlers Report, Part 2 (2019) [Google Scholar]

[5] C. Leyens and M. Peters, WILEY-VCH Verlag GmbH & Co. KGaA, (2003) 1-36 [Google Scholar]

[6] ASTM E466 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials (2015) [Google Scholar]

[7] Metallic Materials Properties Development and Standardization (MMPDS), Battelle Memorial Institute (2008) [Google Scholar]

[8] H.J. Schäfer, P. Beiss, C. Broeckmann, proceedings of Fifth International Conference on Very High Cycle Fatigue, DVM, (2011) 519-524 [Google Scholar]

[9] G. Terlinde, H.-J. Rathjen & K.-H. Schwalbe, Metallurgical Transactions A, 19A (1988) 1037-1049 [CrossRef] [Google Scholar]

[10] L. Wagner & J.K. Bigoney, in Titanium and Titanium Alloys, C. Leyens and M. Peters, WILEY-VCH Verlag GmbH & Co. KGaA, (2003) 153-185 [Google Scholar]

[11] S.K. Jha, K.S. Ravi Chandran, Scripta Materialia, 48 (2003) 1207-1212 [CrossRef] [Google Scholar]

[12] El-Chaikh, A., Schmidt, P., Christ, H.-J, Procedia Engineering, 2 (2010) 1973-1982 [CrossRef] [Google Scholar]

[13] Simonelli, M., Tse, Y. Y. and Tuck, C., Materials Science and Engineering A. 616 (2014) 1-11 [CrossRef] [Google Scholar]