Open Access
Issue
MATEC Web Conf.
Volume 321, 2020
The 14th World Conference on Titanium (Ti 2019)
Article Number 10001
Number of page(s) 13
Section Melting and Casting
DOI https://doi.org/10.1051/matecconf/202032110001
Published online 12 October 2020
  1. C.E. Shamblen; “Minimising Beta Flecks in the Ti17 Alloy”, Met Trans B, 28B, (1997), pp899-909 [CrossRef] [Google Scholar]
  2. Z. Weldong, Z Yigang, and Yu Hanqing; “Effect of Beta Flecks on Low-Cycle Fatigue Properties of Ti-10V-2Fe-3Al Alloy”, J. Materials Engineering and performance, 9(2), (2000), pp222-232 [CrossRef] [Google Scholar]
  3. Z Xingdon “Beta Flecks in Ti17 Alloy”, J Titanium Industry Progress, 28(4), (2011), pp417-422 [Google Scholar]
  4. Z Yigang “Effect of Beta Fleck on Mechanical Properties (Low Cycle Fatigue)”, Acta Met Sinica, 28(12), (1992), pp560-573. [Google Scholar]
  5. D Li, S-X Hui, W-J Ye and C-L Li, “Microstructure and mechanical properties of a new high-strength and high toughness titanium alloy”, J Rare Metals, (2016), pp1-7 [Google Scholar]
  6. V V Tetyukin, V N Kurapov and Y P Denisov, “Segregation and phase heterogeneity in titanium ingots and semi-finished products”, Proc.“Titanium ‘80” Kyoto (1980), pp2117-2128 [Google Scholar]
  7. Z Yang, H Kou, J Li, R Hu, H Chang and L Zhou, “Macro Segregation Behaviour of Ti-10V-2-Fe-3Al Alloy during Vacuum Consumable Arc Remelting Process”, J Materials Engineering and Performance”, 20(1), (2011), pp65-70. [CrossRef] [Google Scholar]
  8. S M Copley, A F Giamei, S M Johnson and M F Hornbecker, “The Origin of Freckles in Unidirectionally Solidified Castings” Met Trans, 1, pp2193-2204 [CrossRef] [Google Scholar]
  9. J J Moore and N A Shah, “Mechanisms of Formation of A and V segregates in Cast Steel”, Int. Met Rev, 28(6), (1983), pp338-355. [CrossRef] [Google Scholar]
  10. J A Brookes, J S Krafcik, J A Schneider, J A VanDenAvyle, and F Spadafora, “Fe Segregation in Ti-10V- 2Fe-3Al 30 inch VAR Ingot B-fleck Formation”, Proc Int Symp on Liquid Metals Processing and Casting, (1999), pp130-145 [Google Scholar]
  11. P Auburtin, “Determination of the Effect of Growth Front Angle on Freckle Formation”, PhD Thesis Univ of British Columbia, (1998) [Google Scholar]
  12. H Combeau, G Lesoult, “Simulation of Freckle Formation and Related Segregation during the Directional Solidification of Metallic Alloys”, Modeling of Casting, Welding and Advanced Solidification processes VI, ed T S Piwonka et al, publ TMS New York (1993), pp201-208. [Google Scholar]
  13. S Asai and I Muchi, “Theoretical Analysis and Model Experiments on the Formation Mechanism of Channel Segregation”, Trans ISIJ, 18, (1978), pp90-98 [CrossRef] [Google Scholar]
  14. M S Bhat, D R Poirier and J C Heinrich, “Permeability for Cross-Flow through Columnar-Dendritic Alloys”, Met Trans B, 26B, (1995), pp1049-1056 [CrossRef] [Google Scholar]
  15. P Auburtin, S L Cockcroft and A Mitchell, “Liquid Density Inversion during the Solidification of Superalloys and its Relationship to Freckle Formation in Castings” Superalloys (1996), publ. TMS New York 1996, pp443-450. [Google Scholar]
  16. M C Schneider, J P Gu, C Beckermann, W J Boettinger and U R Kattner, “Modeling of Micro- and Macro-Segregation and Freckle Formation in Single Crystal Nickel-Base Superalloy Directional Solidification”, Met Trans A, 28A, (1997), pp1517-1531. [CrossRef] [Google Scholar]
  17. K Kajikawa, M Tanaka, S Suzuki and H Yamada, “Freckling Tendencies of A-USC Candidate Ni-Based Superalloys” Proc IFM (2011), pp219-223. [Google Scholar]
  18. Kawakami A. Mitchell, and S L Cockcroft: “Segregation in Titanium Ingots”, J High Temperature Materials and Processes, 26 (1), (2007) 59-79 [Google Scholar]
  19. A Kawakami and A Mitchell: “ Solidification and Segregation in Titanium Alloys” Proc Ti2007 Conference, Kyoto Japan (2007), publ. Japan Titanium Society, Tokyo 159-166, [Google Scholar]
  20. L Nastac, J Chou and Y Pang, “Assessment of Solidification Kinetics Parameters for Titanium Alloys” Proc Int Symp on Liquid metal Processing and Casting 1999, publ AVS, (1999), pp207-224. [Google Scholar]
  21. A Kawakami, “Study of Solidification and Segregation in Titanium Alloys” MASc Thesis University of British Columbia (2002). [Google Scholar]
  22. K Kelkar, S Patankar, A Mitchell, O Kanou, N Fukada and K Suzuki: “Computational Modelling of the VAR process for the Production of Ingots of Titanium Alloys” Proc “Ti 2007 Conference”, Kyoto Japan (2007), publ. Japan Titanium Society, Tokyo 159-166, [Google Scholar]
  23. A Mitchell, “Industrial Effects of Columnar/Equiax Transition in Remelted Ingots” International Journal of Cast Metals Research, (2009), 22, pp1-4. [CrossRef] [Google Scholar]
  24. K Sasaki, Y Sugitani, S Kobayashi and S Ishimura, “Interdendritic Fluid Flow during Columnar Solidification of Steels”, ISIJ, (1979), 65, pp 60-69 [Google Scholar]
  25. C C Chen and R R Boyer; “Practical Considerations for Manufacturing High-Strength Ti-10V-2Fe- 3Al Alloy Forgings”, Journal of Metals, July, (1979), pp 33-39. [Google Scholar]
  26. A Mitchell; “Industrial Effects of the Columnar to Equiax Transition”, Journal of Cast Metal Research, (2009), 22, pp 1-8. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.