Open Access
MATEC Web Conf.
Volume 321, 2020
The 14th World Conference on Titanium (Ti 2019)
Article Number 04016
Number of page(s) 9
Section Aerospace Applications
Published online 12 October 2020
  1. C. Leyens, M. Peters, Titanium and Titanium Alloys, fundamentals and applications. Willey-VCH Verlag (2006). [Google Scholar]
  2. M.J. Donachie, Titanium Guide. 2nd edition, AMS international, (2000) 13-24. [Google Scholar]
  3. G. Lütjering, J.C. Williams, Titanium. 2nd edition. Springer Verlag, (2007) 19. [Google Scholar]
  4. L. Po, Z. Yingying, S. Debin and G. Bin, Study on load relaxation based on hot bending and sizing of Ti-6Al-4V alloy sheet, AIP conference proceeding (2013). 1532, 317-323. [Google Scholar]
  5. F. Ozturk, R.E. Ece, N. Polat, A. Koksal, Effect of warm temperature on springback compensation of titanium sheet. Material and manufacturing process, (2010). 25:9, 1021-1024. [Google Scholar]
  6. T. Nawaya, A. von Hehl, S. Wagner, W. Beck, Hot deep drawing processing of titanium sheet metal parts for high temperature applications. Advanced Engineering Materials, Oct. (2018). [Google Scholar]
  7. J. Xiao, D. sheng LI, P. DING, K. ZHAO, X. HUANG, M. XU, Process parameters optimization of Ti-6Al-4V alloy sheet during hot stretch-creep forming. Transactions of nonferrous metals society of China (2015), Vol.25, Issue 2, 420-428. [CrossRef] [Google Scholar]
  8. P. Liu, Y. Zong, D. Shan, B. Guo, Relationship between constant-load creep, decreasing-load creep and stress relaxation of titanium alloy. Materials Science & Engineering A 638 (2015) 106-113. [CrossRef] [Google Scholar]
  9. FormTech: Published on 6th/15/2015. [Google Scholar]
  10. KOBE STEEL, L. Kobe Steel, LTD. Proprietary information. Kobelco, (2005). [Google Scholar]
  11. TIMETAL® Exhaust XT TM, datasheet (2006). [Google Scholar]
  12. Thyssenkrupp Materials Schweiz, datasheet (2010). [Google Scholar]
  13. TIMETAL® 6-4, 6-4 ELI & 6-4-.1Ru, datasheet (2000). [Google Scholar]
  14. E. Doege, B. Behrens, Handbook „Umformtechnik”, 2nd edition, Springer Verlag (2010) 259-264. [Google Scholar]
  15. S. Suwas, R.K. Ray, Crystallographic texture of materials, Engineering Materials and Processes, Springer Verlag (2014). [CrossRef] [Google Scholar]
  16. N. Itoh, M. Ogaya, S. Ishiyamai, T. Matsushita, Y. Hayashi, M. Koike, J. Joetsu, The press formability of commercial pure titanium at warm working temperature, in: Titanium80 Sci. Technol. Proc. Fourth Int. Conf. Titan. Metall. Soc. AIME, Metallurgical Society of AIME, Kyoto, Japan, (1980) 2523. [Google Scholar]
  17. A. Seeger, J. Diehl, S. Mader, H. Rebstock, Work-hardening and worksoftening of face-centred cubic metal crystals, Philos. Mag. 2 (1957) 323-350. [Google Scholar]
  18. A. Caballero, F. Li, D. Ojos, M. Atkinson, J. da Fonseca, On the ductility of alpha titanium: the effect of temperature and deformation mode, Acta Materialai, (2018). [Google Scholar]
  19. W. Jia, W. Zeng, H. Yu, Effect of aging on the tensile properties and microstructures of a near-alpha titanium alloy, Materials and Design 58 (2014) 108-115. [Google Scholar]
  20. S. Kumar, K. Chattopadhyay, V. Singh, Tensile behavior of Ti-6Al-4V alloy at elevated temperatures, Proceeding the international conference on multifunctional materials, structure and applications (2014). [Google Scholar]
  21. O. Kanou, N. Fukada, M. Hayakawa, The effect of Fe addition on the mechanical properties of Ti-6Al-4V alloys produced by the prealloyed powder method, Materials Transactions, Vol. 57, No. 5 (2016) 681-685. [Google Scholar]
  22. M.C. Brandes, M. Baughman, M.J. Mills, J.C. Williams, The effect of oxygen and stress state on the yield behavior of commercially pure titanium, Materials Science and Engineering A 551 (2012) 13-18. [Google Scholar]
  23. D. Kang, K. Lee, E. Kwon, T. Tsuchiyama, Variation of work hardening rate by oxygen contents in pure titanium alloy, Materials Science & Engineering A 632 (2015) 120-126. [Google Scholar]
  24. B. Fu, H. Wang, C. Zou, Z. Wie, The effect of Nb content on microstructure and fracture behavior of near α titanium alloys, Materials and Design 66 (2015) 267-273. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.