| Issue |
MATEC Web Conf.
Volume 321, 2020
The 14th World Conference on Titanium (Ti 2019)
|
|
|---|---|---|
| Article Number | 06001 | |
| Number of page(s) | 4 | |
| Section | Environmental Behavior | |
| DOI | https://doi.org/10.1051/matecconf/202032106001 | |
| Published online | 12 October 2020 | |
Corrosion Resistance of Ultrafine-grained Titanium Alloys in Different Corrosive Environments
a College of Materials Science and Engineering and Tech Institute for Advanced Materials, Nanjing Tech University, Nanjing, 211816, China
b State Key Laboratory of Metal Material for Marine Equipment and Application, Anshan, 114000, China
c Naval Research Institute, Beijing, 100000, China
d Jiangsu Collaborative Innovation Center for Advanced Inorganic Function Composites, Nanjing Tech University, Nanjing, 211816, China
e Department of Physics, Ufa State Aviation Technical University, Ufa, 450000, Russia
Corrosion Resistance of ultrafine-grained (UFG) titanium alloys fabricated by equal channel angular pressing (ECAP) was investigated in this study. Electrochemical measurements of pure Ti and Ti-6Al-7Nb alloy were conducted in 3.5 wt.% NaCl and Ringer’s solution separately. Results indicated that both ultrafine-grained pure Ti and Ti-6Al-7Nb alloy had much lower corrosion current density than annealed coarse-grained counterparts in the specified corrosive environment.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.