EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 321 (2020) MATEC Web Conf., 321 (2020) 12011 References
Open Access
Issue
MATEC Web Conf.
Volume 321, 2020
The 14th World Conference on Titanium (Ti 2019)
Article Number 12011
Number of page(s) 20
Section Microstructure Evolution
DOI https://doi.org/10.1051/matecconf/202032112011
Published online 12 October 2020
  1. G. Lütjering, J.C. Williams, Titanium, Springer, Berlin, 2007. [Google Scholar]
  2. C. Leyens, M. Peters (ed), Titanium and Titanium Alloys. Fundamentals and Applications, WILEY-VCH, Weinheim, 2003. [Google Scholar]
  3. M.J. Donachie, Titanium, A Technical Guide, ASM International, Ohio, 2000. [Google Scholar]
  4. H. Clemens, H. Kestler, Adv. Eng. Mater. 2 (2000) 551-570. [Google Scholar]
  5. M. Weimer, T. Kelly, Gamma TiAl Applications at GE Aviation, in: Structural Aluminides for Elevated Temperature Applications: Gamma Titanium and Other Metallic Aluminides, New Orleans, USA, (2008) 5-6. [Google Scholar]
  6. T. Noda, Current Status of Mass Production of Gamma Titanium Aluminide Alloy Turbine Rotors in Turbochargers and Future Challenges, in: Structural Aluminides for Elevated Temperature Applications: Gamma Titanium and Other Metallic Aluminides, New Orleans, USA, (2008) 7-8. [Google Scholar]
  7. H. Clemens, W. Smarsly, V. Güther, S. Mayer, Advanced intermetallic titanium aluminides, 13th World Titanium Conference Proceeding, San Diego, USA, (2015) 1189-1200. [Google Scholar]
  8. Y.L. Hao, R. Yang, Y.Y. Cui, D. Li, Acta Mater. 48 (2000) 1313-1324. [CrossRef] [Google Scholar]
  9. R. Kainuma, Y. Fujita, H. Mitsui, K. Ishida, Intermetallics 8 (2000) 855-867. [CrossRef] [Google Scholar]
  10. U.R. Kattner, JOM 49 (1997) 14-19. [CrossRef] [Google Scholar]
  11. H.L. Lukas, S.G. Fries, B. Sundman, Computational Thermodynamics: The Calphad Method, Cambridge University Press, New York, 2007. [CrossRef] [Google Scholar]
  12. N. Saunders, A.P. Miodownik, Calphad - Calculation of Phase Diagrams: A Comprehensive Guide, Pergamon Press, Oxford, 1998. [Google Scholar]
  13. B. Sundman, Thermo-Calc, A General Tool for Phase Diagram Calculations, in: M. Doyama, T. Suzuki, J. Kihara, R. Yamamoto (Eds.), Computer Aided Innovation of New Materials, North Holland, Amsterdam, 1991. [Google Scholar]
  14. J.O. Andersson, T. Helander, L. Höglund, P.F. Shi, B. Sundman, CALPHAD 26 (2002) 273-312. [Google Scholar]
  15. Thermo-Calc Software, The Precipitation Module (TC-PRISMA) User Guide (accessed December 2018) [Google Scholar]
  16. Thermo-Calc Software, TCTI Ti-based Alloys database version 2 (released December 2018) [Google Scholar]
  17. Thermo-Calc Software, MOBTI Ti-alloys Mobility Database version 3 (released December 2018) [Google Scholar]
  18. X.-G. Lu, M. Selleby, B. Sundman, Acta Mater. 53 (2005) 2259-2272. [CrossRef] [Google Scholar]
  19. X.-G. Lu, M. Selleby, B. Sundman, Calphad 29 (2005) 68-89. [CrossRef] [Google Scholar]
  20. SGTE Pure Element Database, SGTE, Scientific Group Thermodata Europe, 2009, Version 5.0. [Google Scholar]
  21. J.-W. Yeh, S.-K. Chen, S.-J. Lin, J.-Y. Gan, T.-S. Chin, T.-T. Shun, C.-H. Tsau, S.-Y. Chang, Adv. Eng. Mater. 6 (2004) 299-303. [CrossRef] [Google Scholar]
  22. I. Ansara, N. Dupin, H.L. Lukas, B. Sundman, J. Alloys Compd. 247 (1997) 20-30. [CrossRef] [Google Scholar]
  23. N. Dupin, I. Ansara, B. Sundman, CALPHAD 25 (2001) 279-298. [CrossRef] [Google Scholar]
  24. J. Ågren, ISIJ International 32 (1992) 291-296. [CrossRef] [Google Scholar]
  25. W.J. Boettinger, U.R. Kattner, S.R. Coriell, Y.A. Chang, Development of multicomponent solidification micromodels using a thermodynamic phase diagram data base, in : Modeling of casting, welding and Advanced solidification Processes, VII, TMS, Warrendale, PA, (1995) 649-656. [Google Scholar]
  26. P. Erdely, R. Werner, E. Schwaighofer, H. Clemens, S. Mayer, Intermetallics 57 (2015) 17-24. [CrossRef] [Google Scholar]
  27. R. Boyer, E.W. Collings, G. Welsch, Materials Properties Handbook: Titanium Alloys, ASM International, 1994. [Google Scholar]
  28. S.L. Semiatin, T.M. Lehner, J.D. Miller, R.D. Doherty, D.U. Furrer, Metall. Mater. Trans. A, 38 (2007) 910-921. [CrossRef] [Google Scholar]
  29. P. Pietrokowsky, P. Duwez, Am. Inst. Min. Metall. Pet. Eng. Soc. Min. Eng. AIME, 194 (1952) 627-630. [Google Scholar]
  30. H. Kaneko, Y.C. Huang, J. Jpn. Inst. Met., 27 (1963) 387. [CrossRef] [Google Scholar]
  31. T. Sato, S. Hukai, Y.C. Huang, Journal of the Australian Institute of Metals, 5 (1960) 149. [Google Scholar]
  32. H. Kaneko, Y.C. Huang, J. Jpn. Inst. Met., 27 (1963) 403. [CrossRef] [Google Scholar]
  33. M. Ikeda, S.Y. Komatsu, T. Sugimoto, K. Kamei, J. Jpn. Inst. Met., 54 (1990) 743-751. [CrossRef] [Google Scholar]
  34. H.K. Adenstedt, J.R. Pequignot, J.M. Raymer, Trans. Metall. Soc. AIME., 44 (1952) 990-1003. [Google Scholar]
  35. V.V. Molokanov, D.B. Chernov, P.B. Budberg, Met. Sci. Heat Treat., 19 (1977) 704-705. [CrossRef] [Google Scholar]
  36. F. Ermanis, P.A. Farrar, H. Margolin, Trans. Metall. Soc. AIME, 221 (1961) 904-908. [Google Scholar]
  37. H.J. Fecht, R.K. Wunderlich, Proc. First Int. Symp. on Microgravity Research & Applications in Phys. Sci. & Biotechnol., Sorrento, Italy, 10-15 September 2000 (ESA SP-454, January, 2001), 545-552. [Google Scholar]
  38. A. Ludwig, Int. J. Thermophys. 23 (2002) 1131-1146. [CrossRef] [Google Scholar]
  39. IMI Titanium property data, report MK140/589. [Google Scholar]
  40. D.N. Williams, Trans. Met. Soc. AIME, 221 (1961) 411. [Google Scholar]
  41. W.M. McGee, B.R. Matthews, U. S. A. F. Rept. ASD-TDR-62-335 (2A), 1962. [Google Scholar]
  42. R.F. Brooks, J.A.J. Robinson, L.A. Chapman, M.J. Richardson, High Temperatures-High Pressures, 35-36 (2003-2004) 193-198. [CrossRef] [Google Scholar]
  43. I. Egry, R. Brooks, D. Holland-Moritz, R. Novakovic, T. Matsushita, E. Ricci, S. Seetharaman, R. Wunderlich, D. Jarvis, Int. J. Thermophys. 28 (2007) 1026-1036. [CrossRef] [Google Scholar]
  44. R. Harding, R. Brooks, G. Pottlacher, J. Brillo, Thermo-physical properties of a Ti-44Al-8Nb-1B alloy in the solid and molten conditions, in: Gamma Titanium and Other Metallic Aluminides, TMS, Warrendale, PA, (2003) 75-82. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.