Open Access
MATEC Web Conf.
Volume 321, 2020
The 14th World Conference on Titanium (Ti 2019)
Article Number 03004
Number of page(s) 8
Section Additive and Near Net Shape Manufacturing
Published online 12 October 2020
  1. Dr Chen and the philosopher’s stone. 2000. [Google Scholar]
  2. Frazier W.E., Metal Additive Manufacturing: A Review. Journal of Materials Engineering and Performance, 2014. 23(6): p. 1917-1928. [Google Scholar]
  3. Taufik, M. and P.K. Jain, Role of build orientation in layered manufacturing: a review. International Journal of Manufacturing Technology and Management, 2013. 27(1-3): p. 47-73. [Google Scholar]
  4. Kumke, M., et al., Methods and tools for identifying and leveraging additive manufacturing design potentials. International Journal on Interactive Design and Manufacturing (IJIDeM), 2017. [Google Scholar]
  5. Greitemeier, D., et al., Uncertainty of Additive Manufactured Ti-6Al-4V: Chemistry, Microstructure and Mechanical Properties. Applied Mechanics and Materials, 2015. 807: p. 169-180. [Google Scholar]
  6. Sames W.J., et al., The metallurgy and processing science of metal additive manufacturing. International Materials Reviews, 2016. 61(5): p. 315-360. [Google Scholar]
  7. Raghavan, N., et al., Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing. Acta Materialia, 2016. 112: p. 303-314. [Google Scholar]
  8. Lin J.J., et al., Microstructural evolution and mechanical properties of Ti-6Al-4V wall deposited by pulsed plasma arc additive manufacturing. Materials & Design, 2016. 102: p. 30-40. [Google Scholar]
  9. Herzog, D., et al., Additive manufacturing of metals. Acta Materialia, 2016. 117: p. 371-392. [Google Scholar]
  10. Wang, F., et al., Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V. Metallurgical and Materials Transactions A, 2012. 44(2): p. 968-977. [Google Scholar]
  11. Wang, F., S. Williams, and M. Rush, Morphology investigation on direct current pulsed gas tungsten arc welded additive layer manufactured Ti6Al4V alloy. The International Journal of Advanced Manufacturing Technology, 2011. 57(5-8): p. 597-603. [Google Scholar]
  12. Kobryn, P. and S. Semiatin, The laser additive manufacture of Ti-6Al-4V. Jom, 2001. 53(9): p. 40-42. [Google Scholar]
  13. Thijs, L., et al., A study of the microstructural evolution during selective laser melting of Ti–6Al–4V. Acta Materialia, 2010. 58(9): p. 3303-3312. [Google Scholar]
  14. Obasi G.C., et al., Effect of β grain growth on variant selection and texture memory effect during α→β→α phase transformation in Ti–6 Al–4 V. Acta Materialia, 2012. 60(3): p. 1048-1058. [Google Scholar]
  15. Antonysamy A.A., P.B. Prangnell, and J. Meyer, Effect of Wall Thickness Transitions on Texture and Grain Structure in Additive Layer Manufacture (ALM) of Ti-6Al-4V. Materials Science Forum, 2012. 706-709: p. 205-210. [Google Scholar]
  16. Al-Bermani S.S., et al., The Origin of Microstructural Diversity, Texture, and Mechanical Properties in Electron Beam Melted Ti-6Al-4V. Metallurgical and Materials Transactions A, 2010. 41(13): p. 3422-3434. [Google Scholar]
  17. Thijs, L., et al., Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum. Acta Materialia, 2013. 61(12): p. 4657-4668. [Google Scholar]
  18. Antonysamy A.A., J. Meyer, and P.B. Prangnell, Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti6Al4V by selective electron beam melting. Materials Characterization, 2013. 84: p. 153-168. [Google Scholar]
  19. Basak, A. and S. Das, Epitaxy and Microstructure Evolution in Metal Additive Manufacturing. Annual Review of Materials Research, 2016. 46(1): p. 125-149. [Google Scholar]
  20. Kobryn P.A. and S.L. Semiatin, Microstructure and texture evolution during solidification processing of Ti–6Al–4V. Journal of Materials Processing Technology, 2003. 135(2-3): p. 330-339. [Google Scholar]
  21. Vrancken, B., et al., Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties. Journal of Alloys and Compounds, 2012. 541: p. 177-185. [Google Scholar]
  22. Kok, Y., et al., Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review. Materials & Design, 2018. 139: p. 565-586. [Google Scholar]
  23. Cayron, C., ARPGE: a computer program to automatically reconstruct the parent grains from electron backscatter diffraction data. Journal of applied crystallography, 2007. 40(6): p. 1183-1188. [Google Scholar]
  24. NN-SVG. Available from: [Google Scholar]
  25. Pineau, A., et al., Growth competition between columnar dendritic grains–Cellular automaton versus phase field modeling. Acta Materialia, 2018. 155: p. 286-301. [Google Scholar]
  26. Daalkhaijav, U., et al., Rheological modification of liquid metal for additive manufacturing of stretchable electronics. Advanced Materials Technologies, 2018. 3(4): p. 1700351. [Google Scholar]
  27. Kingma D.P. and J. Ba, Adam: A method for stochastic optimization. arXiv preprint arXiv:1412.6980, 2014. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.